If an element is located on the far right side of the periodic table, what would one of its physical properties probably be?a. easily drawn into thin wires
b. poor conductor of electricity
c. high density
d. malleable

Answers

Answer 1
Answer:

If an element is located on the far right side of the periodic table one of its physical properties probably be poor conductor of electricity. The answer is letter B.


Related Questions

How does the number of molecules in 1 mol of oxygen compare with the number of molecules in 1 mol of nitrogen?1) 1 mol of oxygen has fewer molecules.2) 1 mol of oxygen has more molecules.3) Each sample has the same number of molecules.4) The molecules cannot be compared without knowing the mass.
What would most likely be included in the “Analysis” section of a lab report?
Freezing requiresa. the removal of energy. b. the absorption of energy. c. no energy change.
The chemical symbol for iron is
8. why the partial negative charge occurs in a molecule of water?

The fuel used in many disposable lighters is liquid butane, C4H10. Butane has a molecular weight of 58.1 grams in one mole. How many carbon atoms are in 4.00 g of butane?

Answers

Matter is made of very tiny particles. One mole of a substance contains a given amount of particles. This number is constant for all particles- 6.022×10^23 , and is called Avogadro's constant. To get the number of particles in 4g of butane, we need to calculate the number of moles represented by 4 g, then multiply by the Avogadro's constant (Since each mole has particles equivalent to the Avogadro's constant) 
Therefore, if 1 mole = 58.1g
                how many moles will be equal to 4g?
                we cross multiply  (4x1) divide by 58.1
                equals 0.068847moles
multiply by Avogadro constant = 4.1466 x 10^molecules
But remember the question is not about the number of molecules in butane, its about the number of carbon atoms. 
Since there are four carbons in butane, and each has 
 4.1466 x 10^22 atoms
to get the number of atoms, we multiply by four
equals 1.6586 x 10^atoms

\boxed{1.657 * {\text{1}}{{\text{0}}^{{\text{23}}}}{\text{ atoms}}} of carbon is present in 4.00 g of butane.

Further Explanation:

The number of atoms or molecules that can be present in one mole of any substance is determined by a number, known as Avogadro’s number. The numerical value of Avogadro’s number is {\text{6}}{\text{.022}} * {\text{1}}{{\text{0}}^{{\text{23}}}}\;{\text{units}}. Such units can either be atoms or molecules.

The formula to calculate the moles of {{\text{C}}_{\text{4}}}{{\text{H}}_{{\text{10}}}} is as follows:

{\text{Moles of }}{{\text{C}}_{\text{4}}}{{\text{H}}_{{\text{10}}}} = \frac{{{\text{Given mass of }}{{\text{C}}_{\text{4}}}{{\text{H}}_{{\text{10}}}}}}{{{\text{Molar mass of }}{{\text{C}}_{\text{4}}}{{\text{H}}_{{\text{10}}}}}}                                                       …… (1)

The given mass of butane is 4.00 g.

The molar mass of butane is 58.1 \text{g/mol}.

Incorporate these values in equation (1).

 \begin{aligned}{\text{Moles of }}{{\text{C}}_{\text{4}}}{{\text{H}}_{{\text{10}}}} &= \left( {{\text{4}}{\text{.00 g}}} \right)\left( {\frac{{{\text{1 mol}}}}{{{\text{58}}{\text{.1 g}}}}} \right)\n&= {\text{0}}{\text{.0688 mol}}\n\end{aligned}

The number of molecules present in one mole of butane is {\text{6}}{\text{.022}} * {\text{1}}{{\text{0}}^{{\text{23}}}}\;{\text{molecules}}. So the expression to calculate the number of molecules of butane is as follows:

{\text{Molecules of butane}} = \left( {{\text{Moles of butane}}} \right)\left( {{\text{Avogadro's Number}}} \right)                …… (2)                

The number of moles of butane is 0.0688 mol.

The value of Avogadro’s number is {\text{6}}{\text{.022}} * {\text{1}}{{\text{0}}^{{\text{23}}}}\;{\text{molecules}}.

Incorporate these values in equation (2).

\begin{aligned}{\text{Molecules of butane}}{\mathbf{ }}&=\left( {0.0688{\text{ mol}}} \right)\left( {\frac{{{\text{6}}{\text{.022}} * {\text{1}}{{\text{0}}^{{\text{23}}}}{\text{ molecules}}}}{{{\text{1 mol}}}}} \right)\n&= 4.143 * {\text{1}}{{\text{0}}^{{\text{22}}}}{\text{ molecules}}\n\end{aligned}  

A molecule of butane consists of four carbon atoms in it. So the number of carbon atoms can be calculated as follows:

 \begin{aligned}{\text{Atoms of carbon}}&= \left( {4.143 * {\text{1}}{{\text{0}}^{{\text{22}}}}{\text{ molecules}}} \right)\left( {\frac{{{\text{4 C atoms}}}}{{{\text{1 molecule of butane}}}}} \right)\n&= 1.657 * {\text{1}}{{\text{0}}^{{\text{23}}}}{\text{ C atoms}}\n\end{aligned}

Learn more:

  1. How many grams of potassium were in the fertilizer? brainly.com/question/5105904
  2. Determine how many moles of water produce: brainly.com/question/1405182

Answer details:

Grade: Senior School

Chapter: Mole concept

Subject: Chemistry

Keywords:4.00 \text{g}, 58.1 \text{g/mol}, butane, C4H10, Avogadro’s number, 1.657*10^22C atoms, moles, one mole, chemical formula, carbon atoms, molar mass of C4H10, given mass of C4H10.

Which statement best explains the role of acatalyst in a chemical reaction?
(1) A catalyst is added as an additional reactant
and is consumed but not regenerated.
(2) A catalyst limits the amount of reactants used.
(3) A catalyst changes the kinds of products produced.
(4) A catalyst provides an alternate reaction pathway
that requires less activation energy.

Answers

The answer is (4). If you look at a Maxwell-Boltzmann energy curve, you will see that lowering the activation energy will increase the proportion of molecules with sufficient energy for a successful reaction collision. Therefore, a reaction with lower activation energy will proceed more quickly. Often, this lower activation energy is obtained by another mechanistic pathway. Catalysts increase reaction speed through these two basic mechanisms.

How many different sublevels are in the third energy level?A.3
B.4
C.1
D.2
the answer is a

Answers

Answer:

Its a

Explanation:

I got that answer on my own not from the Question ;)

Final answer:

The third energy level in an atom, as described by quantum mechanics, contains three sublevels: the s, p, and d sublevels.

Explanation:

In the field of chemistry, the term energy level refers to the fixed amount of energy that a system described by quantum mechanics, such as a molecule, atom, electron, or nucleus, can have. Specifically, when we refer to the third energy level, we're talking about an energy state with the principal quantum number n=3.

For any energy level defined by the principal quantum number n, there are n sublevels. Therefore, in a third energy level (n=3), we have three sublevels. These would be the s, p, and d sublevels.

Learn more about energy level here:

brainly.com/question/17396431

#SPJ6

Classify each of the following statements as an experiment, a hypothesis, a scientific law, an observation, or a theory. For example, Joseph Gay-Lussac reacted hydrogen and oxygen to produce water vapor, and he reacted nitrogen and oxygen to form either dinitrogen oxide (N2O) or nitrogen monoxide (NO). Gay-Lussac found that hydrogen and oxygen react in a 2:1 volume ratio and that nitrogen and oxygen can react in 2:1 or 1:1 volume ratios depending on the product. In 1808, Gay-Lussac published a paper in which he stated that the relative volumes of gases in a chemical reaction are present in the ratio of small integers provided that all gases are measured at the same temperature and pressure. In 1811, Amedeo Avogadro proposed that equal volumes of all gases measured at the same temperature and pressure contain the same number of molecules. By midcentury, Rudolf Clausius, James Clerk Maxwell, and others had developed a detailed rationalization of the behavior of gases in terms of molecular motions

Answers

Answer:

Classify each of the following statements as an experiment, a hypothesis, a scientific law, an observation, or a theory.

(1) For example, Joseph Gay-Lussac reacted hydrogen and oxygen to produce water vapor, and he reacted nitrogen and oxygen to form either dinitrogen oxide (N2O) or nitrogen monoxide (NO). Gay-Lussac found that hydrogen and oxygen react in a 2:1 volume ratio and that nitrogen and oxygen can react in 2:1 or 1:1 volume ratios depending on the product.

(2) In 1808, Gay-Lussac published a paper in which he stated that the relative volumes of gases in a chemical reaction are present in the ratio of small integers provided that all gases are measured at the same temperature and pressure.

(3) In 1811, Amedeo Avogadro proposed that equal volumes of all gases measured at the same temperature and pressure contain the same number of molecules.

(4) By midcentury, Rudolf Clausius, James Clerk Maxwell, and others had developed a detailed rationalization of the behavior of gases in terms of molecular motions

The correct answers to the question are as follows

(1) An experiment

(2) A scientific law

(3) A hypothesis

(4) A theory

Explanation:

(1)  An experiment

A scientific experiment involves the development of procedures to verify an hypothesis

(2) A scientific law

A scientific law is a description or general rule to explain an observed phenomenon using a mathematical or verbal statement without attempting to provide an explanation

(3) A hypothesis

An hypothesis is an explanation of an observed phenomenon which can then be tested through the performance of experiments

(4) A theory

A theory in science is an explanation of naturally occurring phenomenon backed up by the results of experiments and observation

Final answer:

The given statements have been classified as experiment (1), observation (2), scientific law statement (3), hypothesis (4), and theory (5) respectively in the context of Chemistry.

Explanation:

1. Joseph Gay-Lussac reacted hydrogen and oxygen to produce water vapor, and he reacted nitrogen and oxygen to form either dinitrogen oxide or nitrogen monoxide: This is an experiment.

2. Gay-Lussac found that hydrogen and oxygen react in a 2:1 volume ratio and that nitrogen and oxygen can react in 2:1 or 1:1 volume ratios depending on the product: This is an observation.

3. In 1808, Gay-Lussac published a paper in which he stated that the relative volumes of gases in a chemical reaction are present in the ratio of small integers provided that all gases are measured at the same temperature and pressure: This is a statement of a scientific law.

4. In 1811, Amedeo Avogadro proposed that equal volumes of all gases measured at the same temperature and pressure contain the same number of molecules: This is a hypothesis.

5. By midcentury, Rudolf Clausius, James Clerk Maxwell, and others had developed a detailed rationalization of the behavior of gases in terms of molecular motions: This is a theory.

Learn more about Scientific Statements Classification here:

brainly.com/question/33716172

#SPJ3

Which is true about the temperature of a gas?At a higher temperature, the particles have a higher average kinetic energy.
At a higher temperature, the volume of the gas is smaller.
At a lower temperature, there are more particles in the gas.
At a lower temperature, the particles in the gas move faster.

Answers

The statement that true about the temperature of a gas is at  a higher temperature, the particles have a higher average kinetic energy. The rest of the choices do not answer the question above.

Answer:

A

Explanation:

Took the test Got it right

Once released, acetylcholine is degraded by extracellular enzymes into what product(s)?A) acetate + choline
B) acetyl CoA + choline
C) methylcholine + acetate
D) choline only
E) acetate only

Answers

Final Answer:

Once released, acetylcholine is degraded by extracellular enzymes into acetate + choline. Option A is the correct answer.

Explanation:

Acetylcholine (ACh) is a neurotransmitter responsible for transmitting signals across synapses in the nervous system. Once it is released into the synaptic cleft, acetylcholine is rapidly broken down by the enzyme acetylcholinesterase (AChE). The enzymatic degradation of acetylcholine by AChE results in the hydrolysis of the acetyl group, leading to the formation of acetate and choline.

Acetate is a small molecule that is easily cleared from the synaptic cleft, while choline can be taken up by the presynaptic neuron to be reused for the synthesis of new acetylcholine molecules. This degradation process is essential for terminating the signal transmission and preventing continuous stimulation of the postsynapticneuron.

Option A is the correct answer.

You can learn more about acetylcholine  at

brainly.com/question/27960161

#SPJ11

It’s acetate + choline