In the default setting on PowerPoint how many changes can the undo button make

Answers

Answer 1

Answer: The default setting of the undo command on Microsoft PowerPoint can reach from 5 to 10 times. Note that the Undo button/command is very useful as it can fix errors in just a single click of the button, and you can adjust the amount if you want more ways to undo.

Related Questions

Using MRTG, Ntop, and SNMPC to collect flow data from your routers and switches to identify traffic/packet anomalies is an example of a _____________, ____________-based IDS/IPS.
Press the ____ key(s) to erase one character to the left of the insertion point.
Requirement types discussed during software development include _____.A) functional and color schemeB) nonfunctional and code styleC) constraint and nonfunctionalD) fashionable and functional.
2 9 10 Ready Sheetl Match the following columns: Column A Worksheet o Workbook o Cell Active cell o Columns Rows E MAA Column B o horizontal divisions of a worksheet. o a small rectangular area ● Vertical division of worksheet Fill in the blanks with suitable words: o has maximum 1048576 rows and 18278 (A to ZZZ) columns May contain several worksheets o Selected cell in the worksheet e. f. 5 identi Columns are iden g. The int rectan Write do Comm Save, Cut, Inse For Zo N 6 A 2
Your networking contact list should be limited to family members. a. True b. False

Software like Pinnacle Studio and Adobe Premiere Elements are used to create and editChoose one answer.
a.

videos.

b.

animated graphics.

c.

audio files for podcasts.

d.

screen capture images.

Answers

The answer is A, they are used for photos

Jennifer recently bought a new computer to type a new manuscript she’s been working on. She also stored a lot of movies on it to watch during her free time. Though the performance was good at the beginning, it deteriorated quickly over a small period of time. Which of these is the most likely cause?

Answers

Answer:

Decreasing free space on the hard drive

Explanation:

The rapid loss of hard drive free space on some days is like an accident, and we can determine the causes in much easier ways which include:

1. File System Corruption

2. Virus Attacks

3. Windows Restore Points

4. Hibernation Mode

5. Hidden Files

6. Temporary and Cached Files

7. Unknown Reasons

They are prone to bring damage to your drive itself.

If all listed above are not the cause, and you cannot figure out what is eating up your hard drive space, probably you want to do a complete reinstall. Here we recommend you to back up your hard drives before you start.

What is the purpose of using mobile ads that appear between loading screens within popular games? A) Generate revenue for the game developers/publishers. B) Enhance the gaming experience for players. C) Collect feedback and user opinions on the game. D) Improve loading speed and optimize game performance.

Answers

Hello, answer is on the photo, make sure to double check the answer. https://t.ly/FGxVc

Excel’s capability of drilling data through worksheets is an inefficient way to enter data that is common among worksheets True or false?

Answers

The answer is False.

how do you make a circuit so 1 switch will turn on/off all the lights(3 lights) and a second switch will change the lights from all being the same brightness to all being different brightnesses?

Answers

Answer:

The three bulbs can be connected in series to the battery B1, such that when switch SW1 is turned ON all three bulb turns ON with the same brightness. We now have the three resistors R1, R2, and R3 connected in parallel to the lamps LMP1, LMP2, and LMP3 respectively when SW2 turn on. SW2 is a Three Pole Single Throw switch. Please see attachment for the electric circuit diagram.

Explanation:

QUESTION

How do you make a circuit so 1 switch will turn on/off all the lights(3 lights) and a second switch will change the lights from all being the same brightness to all being different brightness?

ANSWER

List of Component Used For The Design Of The Electric Circuit

1. 18Volt Battery ( two 9 Volts batteries connected in series)

2. Three Filament lamps LMP1=LMP2=LMP3= 6V 6W.

3. Three resistors of R1=100Ω, R2=12Ω and R3=3Ω

4. SPST Switch =SW1

5. TPST Switch = SW2

Since the battery is 18V and connected in series to all three lamps, it is capable of delivering 6V per lamp. Each lamp is 6W. So the resistance of the bulb can be determined using Ohm’s law.

V=IR, P=IV = V2/R, R=V2/P

Where I= Current

V= Voltage

R= Resistance

P = Power

Lamp Resistance RL= 62/6 =6Ω

Total resistance of the lamps connected in series Rs= 6+6+6 = 18Ω

The total current through the series resistor combination IS = Battery supplied voltage divide by RS =18/18 =1A

So each lamp will dissipate power PL= I2*R= 1*6 =6W

When switch SW2 is closed, there is now a resistor connected in parallel to each of the lamp which will now reduce the total resistance combination of the lamp and resistors to a values lower than 6Ω

Lamp1 has 100Ω connected in parallel to it to give a total resistance of 5.66Ω

Lamp2 has 12Ω connected in parallel to it to give a total resistance of 4Ω

Lamp3 has 3Ω connected in parallel to it to give a total resistance of 2Ω

The new total resistance of the circuit is now R=5.66+4+2 = 11.66Ω

The new total current flowing through the circuit I=18/11.66 = 1.54A

The power dissipated by each lamp with a new series current of 1.54A can now be recalculated as follows;

Power dissipated by Lamp 1 P1= 1.542*5.66Ω = 13.42W

Power dissipated by Lamp 2 P2= 1.542*4Ω = 9.49W

Power dissipated by Lamp 1 P1= 1.542*2Ω = 4.74W

From the power dissipated by the 3 bulbs, we can see that lamp 3 is bright, lamp 2 is brighter and Lamp 1 is the brightest of all the three lamps.

Parallel circuit. On a wire you put the lights and one switch, on the other you put a resistor and another switch. (and the third wire contains the generator)

What is an image that you can apply to another image to add detail and texture?

Answers

The answer is Pattern.

In Photoshop, a pattern is an image that you apply to provide more detail and texture to an image. This is called Pattern Overlay. To apply pattern overlay effect to your image, click on Add a layer style then choose pattern overlay.

Other Questions

Janice usually works on a particular workbook. She decides to keep a backup of all the data in a separate workbook. She opens a new workbook to transfer the data. Which option should she use to copy all the data from one workbook to another workbook?A. press the Ctrl and V keys on the keyboard B. press the Ctrl and C keys on the keyboard C. press the Ctrl and A keys on the keyboard D. press the Ctrl and Z keys on the keyboard

PeroxyChem's IT staff was able to free its IT staff to spend less time on routine maintenance and more time on strategic tasks designed to grow the business through ________.

Which of the following predictions does the 'availability' heuristic make? A. People should estimate there are more words with the letter K in the first position than the third position. B. People should estimate that there are more words with a K in the third position than the first position. C. People should ignore sample size. D. People should consider sample size.

What is analog computer? How does it differ from digital computer?