Can black holes merge

Answers

Answer 1
Answer: It is possible for two black holes to collide. Once they come so close that they cannot escape each other's gravity, they will mergeto become one bigger black whole.

Related Questions

What does a 10-dB increase in loudness represent?
How much power is required to push a box 4.0 m with a force of 150 N in 2.5s? A. 15WB. 1500WC. 240WD. 94W
which of the following laboratory tool would be most appropiate for measuring the approximate volume of a liquid?
The primary job of a(n) ____ is to increase the power of a modified radio wave.antennaamplifiermodulatertransmitter
Bruce (the dog) is pulling on his lead with a force of 40N at an angle of 26º below the horizontal. Show that the horizontal component of this force is about 36N.Help???

What does latitude measure

Answers

It is the distance of a place north or south of the earth's equator. It's expressed in minutes or degrees
It's used to measure the north or south distance of how far a certain place is located.

If you push a book against a wall hard enough, it will not slide down even though gravity is pulling it. Use what you know about Newton’s laws of motion to explain why the book is not falling. (giving away brainliest!)

Answers

Frictional force is defined by the following formula -

f = coefficient of friction (u) X Normal reaction exerted by the surface (N)

So, f = u X N.

Now 'u' is a constant for given surfaces in contact ( keep in mind that it depends on both the surfaces that are in contact with each other, here wall and the book that you are pressing)

Now, Normal reaction is equal and opposite to the force exerted by an external force on the surface, PERPENDICUAL TO THE SURFACE ( or the perpendicular component of the external force). The external force exerted on the surface which is vertical to it, in this case, is equal to the force that you are applying while you are holding/pressing the book against the wall.

So, at any point of time, frictional force = u X (Force you are applying on the surface, via the book)

Or, f = u X F, where,
f = frictional force,
u = coefficient of friction, and
F = Perpendicular component of the force exerted by you on the book towards the surface.

Now direction of f -
Frictional force always act parallel to the surface and in opposite direction to the direction of motion.

In absence of friction, book will fall down, because of gravity acting on it. So friction will try to act in the opposite direction of this motion. So, upwards in this case.

If let's say you have a metal object placed between magnets, which is applying more force on it than gravity, in upwards direction; and you try to press it against the wall, the motion of object will be upwards, so friction will then act downwards.

Friction always opposes the direction of motion in which the object would have moved because of RESULTANT FORCE on it in absence of friction.

Takeaways in English (or, common observation) -
1) Harder you press the book against the wall, harder it will be for a person to move the book on the surface of the wall, while you are pressing it. Because of higher friction.

2) The more you move the book on the wall, while keep on pressing it, warmer the surface of the book which is in contact with wall will be. Because if more energy is dissipated per second to overcome friction, which gets converted to heat energy.

2.1) Harder you press, book will heat up faster.

3) Harder you press the book against the wall, lesser chance are that it will fall down. Because more frictional force is now acting on it to hold it against gravity.

4) Heavier the book, more frictional force is needed to hold it from falling, and that is why you have to press it harder to hold Heavier books.

5) That is all I can think of right now. Try applying this concept in things you see around.
12.8K viewsView 6 Upvoters · Answer requested by Muhammad Shouman
Related Questions (More Answers Below)

What 2 Tacoma make up the scientific name

Answers

Genus, species.
In that order.

Water vapor is cooled in which of the following processes? A. Turbulence
B. Convection
C. Precipitation
D. Wind storms

I believe it’s C but I’m not sure .

Answers

Answer:

B. Precipitation.

Explanation:

Precipitation is any liquid or frozen water that forms in the atmosphere and falls back to the Earth. It comes in many forms, like rain, sleet, and snow.

Answer:

Precipitation

Explanation:

Precipitation occurs when water vapour in the atmosphere condenses and falls back to the earth as rainfall or precipitation. Water vapour is gaseous, when it is cooled, it condenses to the liquid state. Hence precipitation has to do with cooling of water vapour that escapes from the earth surface. This cooling occurs in the cloud and then precipitation follows. See image attached for more details.

What is the main function of the nuclus

Answers

Nucleus is known as "the control center of the cell"
It does what it sounds like, main function of a nucleus is to maintain the integrity of the genes and to control the activities of the cell, making sure to regulate the gene expression.
The nucleus is the genetic store of the cell's information. It also controls the functions of the cell

A 1,000 kg ball traveling at 5 m/s would have kinetic energy

Answers

Answer:

12500 J = 12.5 kJ

Explanation:

Kinetic energy is the energy possessed by a moving object solely due to its motion.

You can get the K.E. of an object using the equation,

K.E. =  (1/2)mv²

So you get, for ball

K.E. =  (1/2)×1000×5²  = 12500 J = 12.5 kJ