Explain convection in as little as possible
Answers
Related Questions
What is the frequency between two turning forks if one has a frequency of 520 Hz and 528 Hz?
Which was a testable idea that Ernest Rutherford developed in his experiments?- The positive charge in an atom is concentrated in one location. - Atoms are not divisible into smaller particles. - It is impossible to define the mass of an atom. - The atom contains no particles that have a neutral charge.
Which of the following objects uses two converging lenses to produce two images, the second of which is virtual, magnified, and inverted Camera Compound microscope Corrective eyeglasses Slide projector
Does an increased volume of a substance increase its density?
Answers
Answer:
Distance covered by B is 4 times distance covered by A
Explanation:
For an object in free fall starting from rest, the distance covered by the object in a time t is
where
s is the distance covered
g is the acceleration due to gravity
t is the time elapsed
In this problem:
- Object A falls through a distance during a time t, so the distance covered by object A is
- Object B falls through a distance during a time 2t, so the distance covered by object B is
So, the distance covered by object B is 4 times the distance covered by object A.
b. proponent
c. medium
d. exposition
Answers
A. mediation is what you so when you want to bring the sides of conflict together
b. is a person who is advocating something
d. is a presentation of some opinion or facts.
Answers
Answer:
Is the sum of a vector of two or more vectors.
Answers
b.850 ma
c.550 ma
d.280 ma
e.650 ma
Answers
the current approximately 7.0 ms after closing the switch is about 250 mA, which is option (a).
To find the current through the circuit 7.0 ms after the switch is closed, we can use the concept of an RL circuit. The current in an RL circuit follows an exponential growth equation, given by:
I(t) = (V/R)(1 - e^(-t/τ))
Where:
I(t) is the current at time t.
V is the voltage from the power supply (15 V in this case).
R is the resistance (60 Ω).
τ (tau) is the time constant of the circuit, given by L/R, where L is the inductance (45 mH = 0.045 H).
First, calculate the time constant τ:
τ = L/R = 0.045 H / 60 Ω = 0.00075 s.
Now, plug in the values into the equation to find I(7.0 ms):
t = 7.0 ms = 0.007 s.
I(0.007 s) = (15 V / 60 Ω) * (1 - e^(-0.007 s / 0.00075 s))
I(0.007 s) = (0.25 A) * (1 - e^(-9.333...))
Now, calculate the current:
I(0.007 s) ≈ (0.25 A) * (1 - e^(-9.333...))
I(0.007 s) ≈ (0.25 A) * (1 - 0.0000962) [Using e^(-9.333...) ≈ 0.0000962]
I(0.007 s) ≈ (0.25 A) * (0.9999038)
I(0.007 s) ≈ 0.24998 A
I(0.007 s) ≈ 250 mA
So, the current approximately 7.0 ms after closing the switch is about 250 mA, which is option (a).
Learn more about RL circuit here:
#SPJ3
Initial current = 0
Final current = (15 V) / (60 ohms) = 0.25 Ampere
Current along the way = 0.25 · (1 - e^- time / time-constant)
"time-constant" = L/R = (0.045 / 60) = 7.5 x 10⁻⁴ second
Current = 0.25 · (1 - e^-10,000t/7.5)
When t = 7 ms,
Current = 0.25 · ( 1 - e^-70/7.5)
Current = 0.25 · (1 - e^-9.33)
Current = 0.25 · (1 - 8.84 x 10⁻⁵)
Current = 0.25 · (0.9999)
Current = so close to 250 mA that you can't tell the difference.
The reason is that 7.0 mS is 9.3 time-constants, and during EVERY time-constant, the current grows by 37% of the distance it still has left to go. So after 9.3 of these, it's practically AT the target.
I have a feeling that the time in the question is SUPPOSED TO BE 7 microseconds. If that's true, then
Current = 0.25 · (1 - e^-[ 7 x 10⁻⁶ / 7.5 x 10⁻⁴ ]
Current = 0.25 · (1 - e^-0.00933)
Current = 0.25 · (1 - 0.9907)
Current = 0.25 · (0.0093)
Current = 2.32 mA ?
No, that can't be it either.
Well ! Now, I'm going to determine the true and correct final answer in the only cheap and sleazy way I have left ... by looking at all the choices offered, and eliminating the absurd ones.
The effect of an inductor in the circuit is to resist any change in current. The final current in this circuit is when it's not trying to change any more. So the final current is just the battery with a resistor across it ... (12 V) / (60 ohms). That's 0.25 Ampere, or 250 mA. The current starts at zero when the switch closes, and it builds up and builds up to 250 mA. It's never more than 250 mA.
So look at the choices ! The only one that not more than 250 mA is choice-A .
THAT has to be it. 7.0 mS is a no-brainer. It's 9.3 time-constants after the switch closes, the current has built up to 99.99% of its final value by then, it's not really trying to change much any more, the inductor is just about finished having any effect on the current, and the current is essentially at its final value of 250 mA. The action is all over.
Now, I fully realize that Mister "Rishwait" is a bot and all, and nobody really needs the answer to this question. But every cloud has a silver lining. It's a numskull question, but it earned me 10 points, and it's been a truly fascinating trip down Memory Lane.
B) They are absorbed
C) The change into P-waves
D) They change into L-waves
Answers
Answer:
B) They are absorbed
Explanation:
B is correct because S waves can only travel through solid materials. When they hit liquid materials they are absorbed in and undetectable.
Answer:
B) They are absorbed
Explanation:
When they hit the liquid core, S-waves are no longer able to be detected. While P-waves bounce off the liquid core, S-waves are absorbed at the core.