An isotope undergoes radioactive decay by emitting radiation that has a –1 charge. What other characteristic does the radiation have?some shielding required
no mass
large mass
high penetrating power

Answers

Answer 1
Answer: The radiation emitted is a beta particle with a -1 charge. Beta particles have a medium penetrating power. An emission of beta particles requires shielding because of the hazards it pose to humans. Thus, one characteristic of this radiation is that some shielding is required.
Answer 2
Answer:

Answer: A) Some shielding required

Explanation:

Simpler for the E2020 Kids now enjoy


Related Questions

3.490x 10^-3 + 1.100x10^-2[?]x10^[?]​
How many dots are shown in the electron dot diagram for calcium, element number 20?
Which category of minerals is associated with maintaining water balance, osmotic equilibrium, acid-base balance and intracellular/extracellular differential?
Which of these pairs of elements have the same number of valence electrons phosphorus (P) and chlorine (Cl) beryllium (Be) and calcium (Ca) chlorine (Cl) and helium (He) oxygen (O) and carbon (C)
David says, "Pure honey has nothing else added." Susan says ,"The honey is not really pure. It is mixture of many subsatnces . Who is right? Explain your answer.

When an inflated balloon is exposed to cold air,a. the temperature inside the balloon rises.
b. the pressure inside the balloon rises.
c. the volume of the balloon decreases.
d. the volume of the balloon increases

Answers

The correct answerwould be C. The volume of the balloon will decrease. As depicted in Charles’Law which states that volume and temperature are directly proportional to each other,when the pressure of the gas is at a constant. When this theory is applied, theballoon will decrease in volume when it is exposed to cold air because the gas pressureinside the balloon remains the same. It is easier to remember this concept withthe equation V/T = K where V is volume, T is Temperature and K is constantpressure. 

An atom that has 14 protons and 17 neutrons is an isotope of which element?

Answers

This is an isotope of silicon since it has 14 protons.  for an element, you can have different numbers of neutrons, however, if you change the number of protons the identity of the element changes.

for example, carbon 14 and carbon 12 both have 6 protons.  The only thing that changed was the number of neutrons which went from 6 to 8.

A) Balance the following equations:i) PbCl2 + AgNO3 <----> AgCl + Pb (NO3) 2
ii) AlCl3 + NH4OH <----> Al(OH)3 + NH4Cl
iii) FeCl3 + Ca(OH)2 <----> CaCl2 + Fe(OH)3
iv) Pb(ClO3)2 + K2SO4 <----> PbSO4 + KClO3
v) Na + HOH <----> NaOH + H2
vi) Zn + HCl <----> ZnCl2 + H2
vii) Al + AgCH3COO <----> Al(CH3COO)3 + Ag
viii) MgO + HNO3 <----> Mg (NO3)2 + H2O
ix) MnO2 <----> Mn3O4 + O2
b) Why is it incorrect to alter the chemical formula when balancing an equation?

Answers

A-
i) PbCl_2 + 2AgNO_3 = 2AgCl + Pb(NO_3)2
ii) AlCl_3 + 3NH_4OH = Al(OH)_3 + 3NH_4Cl
iii) 2FeCl_3 + 3Ca(OH)_2 = 3CaCl_2 + 2Fe(OH)_3
iv) Pb(ClO_3)_2 + K_2SO_4 = PbSO_4 + 2KClO_3
v) 2Na + 2HOH = 2NaOH + H_2
vi) Zn + 2HCl = ZnCl_2 + H_2
vii) Al + 3AgCH_3COO = Al(CH_3COO)_3 + 3Ag
viii) MgO + 2HNO_3 = Mg(NO_3)_2 + H_2O
ix) 3MnO_2 = Mn_3O_4 + O_2

B- Because chemical formula has its own unique set of elements and subscripts

Hope this Helps :)

What is the difference between an exothermic and an endothermic reaction?A. Endothermic reactions absorb heat.

B. Exothermic reactions absorb heat.

C. There are no changes in heat during either reaction.

D. Endothermic reactions release heat.

Answers

answer D

Explanation:hope thhis helped

Which of the following processes are exothermic and which are endothermic? a) frost forms on a car window in winter; b) water condenses on a glass of ice water on a humid summer afternoon; c) adding ammonium nitrate to water causes the temperature of the solution to decrease

Answers

Endothermic reactions are reactions that proceed by the absorption of heat (energy) while exothermic reactions involve a release of energy.

a) Formation of frost on a car window in winter is an exothermic process as heat is liberated when liquid water freezes to form crystals

b) Formation of water condensate on a glass of ice water is an endothermic reaction since heat is absorbed by the cold water from the glass container thereby cooling it.

c) A decrease in the temperature as ammonium nitrate is added to water is an endothermic reaction

a) and b) are exothermic processes because they release heat to the surroundings. c) is an endothermic process because it absorbs heat from the surroundings.

Which of the following processes are exothermic and which are endothermic?

Let's analyze each option:

a) Frost forms on a car window in winter: Exothermic

Frost forming is an exothermic process because it releases heat as water vapor in the air condenses and freezes on the cold car window, giving off energy in the form of heat to the surroundings.

b) Water condenses on a glass of ice water on a humid summer afternoon: Exothermic

Similar to the first scenario, water condensation is exothermic. As water vapor from the humid air comes into contact with the cold glass of ice water, it condenses into liquid water, releasing heat to the surroundings.

c) Adding ammonium nitrate to water causes the temperature of the solution to decrease: Endothermic

This process is endothermic because dissolving ammonium nitrate in water absorbs heat from the surroundings, causing the temperature of the solution to decrease.

Learn more about exothermic and endothermic processes:

brainly.com/question/6506846

#SPJ4

How could you test the law of conservation of matter? ( No atoms can be created or destroyed when under physical or chemical change)

Answers

Answer:

By measuring the total mass of the matter before as well as after any physical or chemical change.

Explanation:

As mentioned, according to the law of conservation of matter, no atoms can be created or destroyed when under physical or chemical change.

Naturally, all the matters have some mass associated with it.

To verify the law of conservation of matter, at first, measure the mass of matter before it underwent any physical or chemical change. Then, again, measure the mass of the matter after the physical or chemical change.

Now, observe both the mass, both must be equal. This verifies the law of conservation of matter.