How does crater density relate to the moon’s geologic history?
Answers
Answer:
High crater density is associated with older surfaces.
Explanation:
Related Questions
You go to another forest and measure the shadow of a tree as being 6 meters long. The shadow of your meterstick is 2 meters long. How tall is the tree?
The formula for degrees Celsius is: C = 5/9 (F − 32), where F stands for degrees Fahrenheit.Part 1: Solve the equation for F and show all steps.Part 2: Determine how many degrees Fahrenheit 20 degrees Celsius is.
When climbing a steep hill, would you want a larger or smaller bicycle gear?
Charmane throws a rock into a lake. She has created _____.a. impact waves b. spring tides c. wind-generated waves d. deep-ocean waves
Answers
Answer:
Explanation:
Creating an even parity circuit in Multisim involves designing a digital logic circuit that checks if the number of '1's in a binary input is even. If the input has an even number of '1's, the circuit should output '1' (indicating even parity); otherwise, it should output '0' (indicating odd parity).
Here's how to create an even parity circuit in Multisim, along with the truth table:
**Creating the Even Parity Circuit:**
1. Open Multisim and create a new blank schematic.
2. Add the following components to your schematic:
- Input pins (for binary input bits)
- XOR gates
- An AND gate
- An inverter (NOT gate)
- Output display (LED or probe)
3. Connect the input pins to the XOR gates. Each input pin corresponds to one bit of the binary input.
4. Connect the outputs of the XOR gates to the inputs of the AND gate.
5. Connect the output of the AND gate to the input of the inverter (NOT gate).
6. Connect the output of the inverter to the output display.
7. Label your input pins for clarity (e.g., A0, A1, A2, ...).
**Designing the Even Parity Truth Table:**
To create the truth table for even parity, you'll need to list all possible input combinations (binary numbers) along with the corresponding output (even or odd).
Assuming you have a 3-bit input (A2, A1, A0), here's the truth table:
| A2 | A1 | A0 | Output (Even Parity) |
|----|----|----|-----------------------|
| 0 | 0 | 0 | 1 (Even) |
| 0 | 0 | 1 | 0 (Odd) |
| 0 | 1 | 0 | 0 (Odd) |
| 0 | 1 | 1 | 1 (Even) |
| 1 | 0 | 0 | 0 (Odd) |
| 1 | 0 | 1 | 1 (Even) |
| 1 | 1 | 0 | 1 (Even) |
| 1 | 1 | 1 | 0 (Odd) |
Each row in the truth table represents a unique combination of input bits (A2, A1, A0) and specifies whether the output is '1' (Even) or '0' (Odd).
Once you have created the circuit in Multisim and designed the truth table, you can simulate the circuit to verify its functionality. Ensure that the circuit produces the expected output (even parity) based on the input values.
Answers
Force = (mass) x (acceleration).
We'll get to work in just a second. But first, I must confess to you that I see
two things happening here, and I only know how to handle one of them. So
my answer will be incomplete, but I believe it will be more reliable than the
first answer that was previously offered here.
On the right side ... where the 2 kg and the 3 kg are hanging over the same
pulley, those weights are not balanced, so the 3 kg will pull the 2kg down, with
some acceleration. I don't know what to do with that, because . . .
At the same time, both of those will be pulled up by the 10 kg on the other side
of the upper pulley.
I think I can handle the 10 kg, and work out the acceleration that IT has.
Let's look at only the forces on the 10 kg:
-- The force of gravity is pulling it down, with the whatever the weight of 10 kg is.
-- At the same time, the rope is pulling it UP, with whatever the weight of 5 kg is ...
that's the weight of the two smaller blocks on the other end of the rope.
So, the net force on the 10 kg is the weight of (10 - 5) = 5 kg, downward.
The weight of 5 kg is (mass) x (gravity) = (5 x 9.8) = 49 newtons.
The acceleration of 10 kg, with 49 newtons of force on it, is
Acceleration = (force) / (mass) = 49/10 = 4.9 meters per second²
b. Gravitational and magnetic forces are the most alike because they are both types of charges that occur in nature.
c. Nuclear and magnetic forces are the most alike because they are both related to mass and weight.
d. Strong nuclear force is most like electric because they are both related to distance.
Answers
Answer:
d) strong nuclear force is most like electric because they are both realted to distance.
Explanation:
btw good luck with 01.08 Motion Module Exam for Physical Science.
Answers
I used the Lens Equation:
Where:
obj. is the distance of the object
im. is the distance of the image
f is the focal length
Final answer:
The image formed by the convex lens is real, located 10.91 cm to the right of the lens, and is inverted. The ray diagram would show rays from the object converging at the image point after passing through the lens.
Explanation:
In order to draw a ray diagram and find the location of the image for an object placed 30.0 cm to the left of a convex lens with a focal length of +8.0 cm, we first utilize what is known as the lens formula, which is 1/f = 1/do + 1/di. Here, f is the focal length of the lens, do is the object distance, and di is the image distance.
In the given question, the object distance (do) is -30 cm (the negative sign indicates that the object is on the same side of the lens as the light source), and the focal length (f) is +8 cm. Plugging these values into the lens equation, we find that 1/di = 1/f - 1/do = 1/8 - 1/(-30). Solving this, we get di = 10.91 cm.
This positive value for di means the image is real, meaning it can be projected onto a screen, and appears on the opposite side of the lens from where the object is. The magnitude of the image distance indicates the image is 10.91 cm from the lens.
To determine the orientation of the image, we use the magnification formula, m = -di/do. Substituting the given values into this formula, we get m = -10.91 / -30 = +0.36. Since this value is positive, the image is inverted. The image would appear smaller than the object because the absolute value of the magnification is less than 1.
Learn more about Convex lens image formation here:
#SPJ11
b. fresh water
c. air
d. cast iron
2. A wave has a wavelength of 10 mm and a frequency of 5 hertz. What is its speed?
a. 50 mm/s
b. 50 hertz/s
c. 2 mm/s
d. 0.50 mm/s
3. How does reflection differ from refraction and diffraction?
a. Reflection is the only process in which the wave does not continue moving forward.
b. Reflection is the only process that involves a change in the wave.
c. Reflection affects all types of mechanical waves, but refraction and diffraction do not.
Answers
Answer : 1. cast iron
2. 50 mm/s
3. Reflection is the only process in which the wave does not continue moving forward.
Explanation :
1. The speed of sound is greatest in solid. So, the speed of the sound is fastest in cast iron. It is approximately equal to 4600 m/s.
2. Wavelength, λ = 10 mm
Frequency, υ = 5 Hz
Speed = wavelength × frequency
Speed = 10 mm × 5 s⁻¹
Speed, s = 50 mm/s
3. The bouncing back of light is called the reflection of light. In this process, the wave does not continue moving forward.
1- CAST IRON
2- 50 mm/s
3- Reflection is the only process in which the wave does not continue moving forward.
B) It is conduction because the egg is touching the pan.
C) It is convection because you put oil in a frying pan to cook in it.
D) It is convection because you can feel the heat a few inches away from the pan.
Answers
Answer: Option (B) is the correct answer.
Explanation:
A process in which transfer of heat occurring when one object touches another object is known as conduction.
For example, when a pan is heated and then an egg is placed over the pan. Then there will be transfer of heat from pan towards the egg.
As a result, the egg gets cooked because the egg was touching the pan.
Hence, we can conclude that it is conduction because the egg is touching the pan.
Heat transfer is used to fry an egg in a pan, It is conduction because the egg is touching the pan. Hence the correct option is option (B).
When frying an egg in a pan, the primary mode of heat transfer is conduction. Conduction is the transfer of heat through direct contact between two objects or substances.
The pan is heated on a stovetop or a heat source, which causes the pan to become hot. When the egg is placed in the pan, the heat from the pan is transferred to the egg through the process of conduction.
Option A suggests that it is conduction because the egg gets cooked, but this answer does not explain the specific mechanism of heat transfer involved.
Option C mentions convection because oil is used in frying. While oil can enhance the cooking process, convection is not the primary mode of heat transfer in this scenario.
Option D states it is convection because you can feel the heat a few inches away from the pan.
Therefore, option B is the correct answer, as it correctly identifies that the heat transfer involved in frying an egg in a pan is conduction because the egg is touching the pan.
To know more about heat transfer:
#SPJ6