Oil flows upward in the wick of a lantern because of liquid property called

Answers

Answer 1

Answer: Capillarity "Capillarity causes the part of the surface of a liquid in contact with a solid, to be either elevated above (e.g. water), or depressed below (e.g. mercury), the rest of the surface. This trait is named for the behaviour of liquids in capillary tubes placed perpendicular to the surface. The forces operating within capillarity are cohesion, adhesion, and surface tension."

Related Questions

PLEASE HELP*******use the table to find the acceleration of the object for the time interval 1.0 to 4.0 seconds
What is the energy of a photon whose frequency is 6.0x10^20 hz?
How is the resistor of a 40v lamp higher then the resistor of a 60v lamp?
When energy is transferred to air, what happens to the particles of air? (1 point) They move slower. They move faster. They cool down. none of the above
Which volcanic hazard can block the sunlight and temporarily cool the Earth’s surface?

As you run toward a source of sound, you perceive the frequency of that sound to

Answers

As you run toward a source of sound, you perceive the frequency of that sound to decrease.

Explanation:

Doppler's effect is a principle used to describe the frequency and the intensity of sound and wavelengths of a source and observer with the two possibilities.

(i) Stationary sound source and moving observer.

(ii) Moving sound source and a stationary observer. It is a relative motion.

Consider when the observer is moving towards a source, the frequency of the sound will be higher and when moving away from the source, the frequency will decrease.

frequency is the speed of vibration and this determines the pitch of the sound. it is only useful or meaningful for musical sounds. where there is a strongly regular waveform. frequency is measured as the number of wave cycles that occur in one second. the unit that is being measured is (hz)

The horizontal surface on which the block of mass 2.2 kg slides is frictionless. The force of 27 N acts on the block in a horizontal direction and the force of 81 N acts on the block at an angle as shown below is the magnitude of the resulting ac celeration of the block? The acceleration of gravity is 9.8 m/s ^ 2

Answers

To determine the magnitude of the resulting acceleration of the block, we need to resolve the forces acting on the block into their horizontal and vertical components.

The force of 27 N acts horizontally, so its horizontal component is 27 N.

The force of 81 N acting at an angle needs to be resolved into its horizontal and vertical components. The horizontal component is given by 81 N * cosθ, where θ is the angle between the force and the horizontal direction. Since the angle is not specified in the question, we cannot determine the exact value of the horizontal component without that information.

Once we have the horizontal components of the forces, we can calculate the net horizontal force acting on the block by summing up all the horizontal components. In this case, the only horizontal force is the force of 27 N, so the net horizontal force is 27 N.

Using Newton's second law, F = ma, where F is the net force and m is the mass of the block, we can solve for the acceleration.

a = F / m
a = 27 N / 2.2 kg
a ≈ 12.27 m/s^2

Therefore, the magnitude of the resulting acceleration of the block is approximately 12.27 m/s^2.

A ball of mass 0.120 kg is dropped from rest from a height of 1.25 m. It rebounds from the floor to reach a height of 0.600 m. What impulse was given to the ball by the floor?

Answers

Here are the given values:

mass (m) = 0.120kginitial velocity (Vo) = 0distance traveled (s) = 1.25 m

We first calculate for the final velocity of the ball:

Vf^2 = 2gs + Vo^2
Vf^2 = 2(9.8m/s2)(1.25m)
Vf = 4.95 m/s

Impulse = m(Vf−Vo)
Impulse = 0.120(4.95)
Impulse = 0.59 Ns

Before we find impulse, we need to find the initial and final momentum of the ball.

To find the momentum of the ball before it hit the floor, we need to figure out its final velocity using kinematics.

Values we know:
acceleration(a) - 9.81m/s^2 [down]
initial velocity(vi) - 0m/s
distance(d) - 1.25m [down]

This equation can be used to find final velocity:

Vf^2 = Vi^2 + 2ad

Vf^2 = (0)^2 + (2)(-9.81)(-1.25)

Vf^2 = 24.525

Vf = 4.95m/s [down]

Now we need to find the velocity the ball leaves the floor at using the same kinematics concept.

What we know:
a = 9.81m/s^2 [down]
d = 0.600m [up]
vf = 0m/s

Vf^2 = Vi^2 + 2ad

0^2 = Vi^2 + 2(-9.81)(0.6)

0 = Vi^2 + -11.772

Vi^2 = 11.772

Vi = 3.43m/s [up]

Now to find impulse given to the ball by the floor we find the change in momentum.

Impulse = Momentum final - momentum initial

Impulse = (0.120)(3.43) - (0.120)(-4.95)

Impulse = 1.01kgm/s [up]

Which of these is most likely to lead directly to a black market?a. a supply shock
c. rationing
b. a price floor
d. equilibrium

Answers

Answer:

c. rationing

Explanation:

Which is an example of a good whose price goes down because of improvements in technology? Why did Communist governments use a command economic system for many years? ... Quantity demanded will exceed quantity supplied, so the price will drop. Excess supply means that producers will make less of the good.

I would say it's rationing: if people are only allowed a certain number of something (let's say: bottles of cooking oil), then the people who are entitled to is (as all are) but don't need is as much are likely to try to make profit by trying to sell it on a black market.

A brass washer has an outside diameter of 4.50 cm with a hole of diameter 1.25 cm and is 1.50 mm thick. The density of brass is 8599 kg/m3. If you put this washer on a laboratory balance, what will it "weigh" in grams?

Answers

We will find the mass from
mass = density x volume
We are told the density and must find the volume from the dimensions given
the volume of the washer will be the area x thickness (remembering to convert all measurements to meters)
if the washer had no hole, its area would be pi (0.0225m)^2 (remember to convert to meters and to use radius)
the area of the hole is pi(0.00625m)^2
so the area of the washer is pi[(0.0225m)^2 - (0.00625m)^2] = 1.5x10^-3 m
the volume of the washer is 1.5x10^-3 m x 1.5x10^-3 m = 2.25x10^-6 m^3 (the thickness of the washer is 1.5 mm = 1.5x10^-3m)
thus, the mass of the washer = 8598kg/m^3 x 2.25x10^-6m^3 = 0.0189kg = 18.9 grams

An opaque material absorbs some light frequencies that shine on it and reflects others. True False please help me

Answers

The answer is true because everything obsorbes light.

Other Questions

PLEASE HELP WILL GIVE MAX POINTS !!!! An 8.24 x 10-7 C charge feels a7.89 x 10-8 N force when it moves2090 m/s at a 29.4° angle to amagnetic field. How strong is the field?[?] 10'?'T

calculate the area that will experience a force of 6000N from liquid exerting pressure of 300Pa. 1kPa=1000Pa

An object is accelerating if there is a change in speed and/or ________. a. timeb. positionc. directiond. displacement

Which element has an atomic number of 9 and an atomic mass of 19?A.boronB.carbonC.sulfurD.fluorine