Weather differs from climate in that weather can change on a daily basis and is not considered a description of year-to-year conditions of temperature and precipitation.

Answers

Answer 1
Answer:

The statement that weather differs from climate in that weather can change on a daily basis and is not considered a description of year-to-year conditions of temperature and precipitation is true. While the climate pertains to the atmospheric conditions over long periods of time.

Answer 2
Answer:

Answer: true

Explanation:

got it right on edge


Related Questions

If a small machine does 2,500 joules of work on an object to move it a distance of 100 meters in 10 seconds,what is the force needed to do the work? What is the power of the machine doing the work?
What is the currency for performing work and what is its unit?
Which describes the eye of a hurricane?a. brings winds of up to 300 km/hc. has strong, spinning windsb. has warm, calm air and light windsd. has spiraling bands of heavy rain
5. Projectile A with mass m is launched at an angle of 20° above the horizontal with a speed v0. Projectile B also with mass m is launched from the same location at an angle of 70° above the horizontal, also with speed v0. Thus, both projectiles have the same initial total energy. a. Which projectile has a larger speed when it hits the ground or do they have the same speed? Explain using energy. b. Which projectile reaches a greater height? Given that both projectiles have the same initial energy, how is this possible?
Energy is measured in Joules (J). Which other quantity is measured in Joules?a. work b. force c. power d. acceleration

The hottest objects with temperatures in the millions of Kelvins, give off most of their radiation in which part of the electromagnetic spectrum? The hottest objects with temperatures in the millions of Kelvins, give off most of their radiation in which part of the electromagnetic spectrum? radio visible X-ray gamma ray ultraviolet

Answers

Answer:

The hottest objects with temperatures in the millions of Kelvins, give off most of their radiation in the form of X-rays and gamma rays.

Explanation:

The electromagnetic (EM) spectrum contains radio waves, microwaves, infrared light, visible light, ultraviolet light, X-rays and gamma-rays. All these different types of radiation are made up of photons having specific wavelengths and different amounts of energy. In the EM spectrum, the photons of radio waves have the lowest energy and the energy of photons increases through microwaves, infrared, visible light, ultraviolet, X-rays, and the photons of gamma-rays have the highest energy (the energy of photons is measured in electron volts).

All warmer objects such as stars, planets, etc emit photons having a specific range of wavelengths and it depends on the surface temperature of those objects. The very hot objects with temperatures in the millions of Kelvins or more mainly emit photons with shorter wavelengths, such as gamma rays and X-rays while cooler objects emit radiation such as infrared or radio waves, having longer wavelengths.

The ultraviolet radiation has the energy in the range of a few electron volts to about 100 eV. The energy of X-ray photons is in the range of 100 eV to 100 keV and the energy of gamma-rays is greater than 100 keV. The nuclear explosions, radioactive decay, the hottest and most energetic objects in the universe such as neutron stars, supernova explosions, etc produce gamma rays.

Objects with temperatures in the millions of Kelvins emit most of their radiation in the X-ray and gamma-ray parts of the electromagnetic spectrum.

Objects with temperatures in the millions of Kelvins primarily give off most of their radiation in the X-ray and gamma-ray parts of the electromagnetic spectrum. As an object's temperature increases, the wavelengths of radiation it emits become shorter. This phenomenon is described by Wien's displacement law.

At lower temperatures, such as those found on Earth or in stars like our Sun, objects emit most of their radiation in the visible and infrared parts of the spectrum. However, as temperatures rise to millions of Kelvins, the emitted radiation shifts to shorter wavelengths, eventually falling into the X-ray and gamma-ray regions.

In the X-ray and gamma-ray parts of the electromagnetic spectrum, radiation has extremely high energy and short wavelengths. These types of radiation are associated with the very high temperatures and intense energy found in extremely hot objects, such as the cores of massive stars, supernovae, and certain high-energy astrophysical phenomena. Scientists use X-ray and gamma-ray telescopes to study these extreme environments and the radiation they emit.

Learn more about Electromagnetic Spectrum here:

brainly.com/question/34371509

#SPJ3

What is the acceleration of a car moving along a straight road that increases its speed from 0 to 100 km/h in 10 s? 10 m/s2 100 km/h·s 1 km/h·s 10 km/h·s

Answers

100 - 0 km/ 10 seconds. Divide it and then you will get your answer. Answer : 10km/ seconds

An underground gasoline tank can hold 1.07 103 gallons of gasoline at 52.0°F. If the tank is being filled on a day when the outdoor temperature (and the gasoline in a tanker truck) is 97.0°F, how many gallons from the truck can be poured into the tank? Assume the temperature of the gasoline quickly cools from 97.0°F to 52.0°F upon entering the tank. (The coefficient of volume expansion for gasoline is 9.6 10-4 (°C)−1.)

Answers

Answer:

1069.38 gallons

Explanation:

Let V₀ = 1.07 × 10³ be the initial volume of the gasoline at temperature θ₁ = 52 °F. Let V₁ be the volume at θ₂ = 97 °F.

V₁ = V₀(1 + βΔθ)  β = coefficient of volume expansion for gasoline = 9.6 × 10⁻⁴ °C⁻¹

Δθ = (5/9)(97°F -52°F) °C = 25 °C.

Let V₂ be its final volume when it cools to 52°F in the tank is

V₂ = V₁(1 - βΔθ) = V₀(1 + βΔθ)(1 - βΔθ) = V₀(1 - [βΔθ]²)

    = 1.07 × 10³(1 - [9.6 × 10⁻⁴ °C⁻¹ × 25 °C]²)

    = 1.07 × 10³(1 - [0.024]²)

    =  1.07 × 10³(1 - 0.000576)

    = 1.07 × 10³(0.999424)

    = 1069.38 gallons

Final answer:

To calculate the amount of gasoline that can be poured into the tank, we need to find the change in volume of the gasoline when its temperature changes from 97.0°F to 52.0°F. Using the equation for volume expansion, we can calculate this change in volume to be approximately 258 gallons.

Explanation:

To calculate the amount of gasoline that can be poured into the tank, we need to find the change in volume of the gasoline when its temperature changes from 97.0°F to 52.0°F. We can use the equation for volume expansion to calculate this change in volume:

ΔV = V₀ * β * ΔT

Where ΔV is the change in volume, V₀ is the initial volume, β is the coefficient of volume expansion, and ΔT is the change in temperature.

In this case, the initial volume V₀ is 1.07 * 10³ gallons, the coefficient of volume expansion β is 9.6 * 10⁻⁴ (°C)⁻¹, and the change in temperature ΔT is (52.0°F - 97.0°F) = -45.0°F.

Converting the change in temperature to Celsius: ΔT = (45.0°F) * (5/9) = -25.0°C.

Plugging in these values into the equation, we get:

ΔV = 1.07 * 10³ * 9.6 * 10⁻⁴ * -25.0 = -258 gallons.

Therefore, when the gasoline is poured into the tank, approximately 258 gallons will be poured out of the truck.

Learn more about Calculating thermal expansion here:

brainly.com/question/33792000

#SPJ3

PLEASEEE HELP, thank you :)

Answers

Answer:

The answer is B.

Explanation:

Given that the current (Ampere) in a series circuit is same so we can ignore it. We can assume that the total voltage is 60V and all the 3 resistance are different, 20Ω, 40Ω and 60Ω. So first, we have to find the total resistance by adding :

Total resistance = 20Ω + 40Ω + 60Ω

=120Ω

Next, we have to find out that 1Ω is equal to how many voltage by dividing :

120Ω = 60V

1Ω = 60V ÷ 120

1Ω=0.5V

Lastly, we have to calculate the voltage at R1 so we have to multiply by 20 (R1) :

1Ω = 0.5V

20Ω = 0.5V × 20

20Ω = 10V

A 10-meter long ramp has a mechanical advantage of 5. What is the height of the ramp?

Answers

1.       If the ramp has a length of 10 and has a mechanical advantage (MA) of 5. Then we need to find the height of the ramp.
Formula:
MA = L / H
Since we already have the mechanical advantage and length, this time we need to find the height .
MA 5 = 10 / h
h = 10 / 5
h = 2 meters

Therefore, the ramp has a length of 10 meters, a height of 2 meters with a mechanical advantage of 5.




Answer:

height=2

Explanation:

MA= input/output

MA= 5

input = 10 (the ramp)

output=x (the height)

5=10/x

x=2

Squaw Valley ski area in California claims that its lifts can move 49800 people per hour. If the average lift carries people about 190 m (vertically) higher, estimate the maximum total power needed. (Assume an average mass per person of 70 kg.) W

Answers

Answer:

1,803,036.67 W

Explanation:

Data provided in the question:

People per hour that can be moved by lift = 49800

Height of movement, h = 190 m

Average mass per person = 70 kg

Now,

Power = Rate of doing work

Thus,

Power = ΔU

= mgh

here,

m = total mass

g = acceleration due to gravity

or

Power =  (70kg × 49800)(9.8)(190)

or

Power = 6,490,932,000 J per hour

also,

Watt = Joule/second

Therefore,

Power = 6,490,932,000 ÷ 3600

= 1803036.67 W

Final answer:

To estimate the maximum total power needed for Squaw Valley ski area to move 49800 people per hour on their lifts, we calculate the work done per person per hour and then divide it by the time taken to travel vertically by 190 m. The estimated maximum total power needed is 3.31 x 10^8 W.

Explanation:

To estimate the maximum total power needed to move 49800 people per hour on a skilift at Squaw Valley, we can calculate the work done per person per hour and then divide it by the time taken to travel vertically by 190m. The work done is equal to the potential energy gained, which is given by the formula mgh, where m is the average mass per person (70 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the vertical height gained (190 m). Multiplying this by the number of people per hour gives us the total work done per hour. Dividing this by the time taken to travel the vertical height gives us the maximum power needed. The power is given by the formula P = W/t, where W is the work done and t is the time taken.

Using the given values, we have:

Work done per person per hour: (70 kg) x (9.8 m/s^2) x (190 m) = 128660 J

Total work done per hour: 128660 J x 49800 = 6.40 x 10^9 J

Time taken to travel vertically by 190m: 190 m / (9.8 m/s^2) = 19.39 s

Maximum power needed: (6.40 x 10^9 J) / (19.39 s) = 3.31 x 10^8 W

Learn more about Power needed for ski lift here:

brainly.com/question/30207881

#SPJ3