A company manufactures hair dryers. It buys some of the components, but it makes the heating element, which it can produce at the rate of 860 per day. Hair dryers are assembled daily, 251 days a year, at a rate of 330 per day. Because of the disparity between the production and usage rates, the heating elements are periodically produced in batches of 2,300 units. a. Approximately how many batches of heating elements are produced annually? (Round your answer to 2 decimal places.) Number of batches
b. If production on a batch begins when there is no inventory of heating elements on hand, how much inventory will be on hand 2 days later? Number of inventory
c.What is the average inventory of elements, assuming each production cycle begins when there are none on hand? (Do not round intermediate calculations. Round your answer to the nearest whole number.) Average inventory
d. The same equipment that is used to make the heating elements could also be used to make a component for another of the firm’s products. That job would require 3 days, including setup. Setup time for making a batch of the heating elements is a half day. Is there enough time to do this job between production of batches of heating elements?

i. No
ii. Yes

Answers

Answer 1
Answer:

Answer:

(a) 93.85 batches of heating elements are produced annually

(b) 1725

(c) 863

(d) Yes

Explanation:

(a) Daily production rate is 860 units

Annual (251 days) production rate is = 251×860 = 215860 units

In a batch, 2300 units are produced

215860 units are produced in (215860 ÷ 2300) = 93.85 batches

(b) In 251 days, 93.85 batches are produced

In 2 days, (93.85×2)÷251 is produced = 0.75 batch

1 batch = 2300 units

0.75 batch = 0.75×2300=1725 units

(c) 0.75 batch is produced in 2days

1 batch is produced in 2/0.75days

Average= (2300×0.75)÷2= 863

Answer 2
Answer:

Final answer:

The company produces approximately 93.85 batches of heating elements annually, has an inventory of 1,060 units two days after production, and maintains an average inventory of 1,150 units. Furthermore, there is enough time to produce other products between batches of heating element production.

Explanation:

To solve this problem, we first need to understand the company's production and consumption rates of the heating elements for their hair dryers.

a. The company produces elements at a rate of 860 per day and runs 251 days per year. Thus, they produce around 215,860 elements annually. As they produce elements in batches of 2,300, the number of batches produced annually will be 215,860 divided by 2,300, which is approximately 93.85. So, the company produces about 93.85 batches of heating elements annually.

b. Two days after the production of a batch, the company will have produced 2 * 860 = 1,720 elements but used 2 * 330 = 660, thus having an inventory of 1,060 units.

c. To calculate the average inventory, we take the sum of the maximum and minimum inventory (2,300 and 0, respectively) and divide by 2, leading to an average inventory of 1,150 units.

d. The time between production of batches of heating elements is the total quantity in a batch divided by the net increase per day (860-330). This equals 2,300/(860-330) approximately 4.8 days. Given that the other product takes 3 days to make, including setup, there is enough time to produce it between batches of heating elements.

Learn more about Inventory Management here:

brainly.com/question/33751079

#SPJ12


Related Questions

Bill's Grill is a popular college restaurant that is famous for its hamburgers. The owner of the restaurant, Bill, mixes fresh ground beef and pork with a secret ingredient to make delicious quarter-pound hamburgers that are advertised as having no more than 25% fat. Bill can buy beef containing 80% meat and 20% fat at $0.85 per pound. He can buy pork containing 70% meat and 30% fat at $0.65 per pound. Bill wants to determine the minimum cost way to blend the beef and pork to make hamburgers that have no more than 25% fat. What is objective function for the mathematical formulation, in words?
"The Federal Reserve raises the reserve requirement from 7 percent to 8 percent. Consequently banks must set aside more money and consequently have less money to lend. The result is that the banks will raise the interest rate they charge to their customers. These conditions make it harder and more expensive for people and businesses to borrow money. Because they can’t borrow as much, they can’t spend as much. If people aren’t spending as much, prices don’t go up. With this action, the Fed has lessened the likelihood of ________."
Which of the following measures the cash available to the company's investors? a. operating cash flow b. free cash flow c. net cash flow d. investing cash flow
1. Fidelity Corporation offers to hire Ron to replace Mon-ica, who has given Fidelity a month's notice of intentto quit. Fidelity gives Ron a week to decide whether toaccept. Two days later, Monica signs an employmentcontract with Fidelity for another year. The next day,Monica tells Ron of the new contract. Ron immediatelysends a formal letter of acceptance to Fidelity. Do Fidel-ity and Ron have a contract? Why or why not? (See Ter-mination of the Offer.)
you are going to deposit $19000 today. You will earn an annual rateof 3.3 percent for 11 years, and then earn an annual rate of 2.7 percent for 14 years. how much will you have in your account in 25 years?

Portside Watercraft uses a job order costing system. During one month Portside purchased $153,000 of raw materials on credit; issued materials to production of $164,000 of which $24,000 were indirect. Portside incurred a factory payroll of $95,000, of which $25,000 was indirect labor. Portside uses a predetermined overhead rate of 170% of direct labor cost. The journal entry to record the application of factory overhead to production is:

Answers

Answer:

Payroll = $95,000,

Indirect labor   = $25000

Direct labor paid = $95000 - $25000 = $70000

∵ predetermined overhead application rate is 170 % of direct labor cost

Overhead applied to work in process = 70000 × 170 %

= $119,000

Journal entry:

Debit  ⇒ Work in process = $1190000

Credit ⇒ Factory Overheads = $119000

Final answer:

To record the application of factory overhead to production, you first calculate the direct labor cost, then multiply by the predetermined overhead rate. The journal entry is a debit to Work in Process and a credit to Factory Overhead for this calculated amount.

Explanation:

The Portside Watercraft company is using a job order costing system and a predetermined overhead rate based on direct labor cost. In this case, to record the application of factory overhead to production, you would first calculate the factory overhead applied by multiplying the direct labor cost (total labor cost minus indirect labor cost) by the predetermined rate.

The direct labor cost would be calculated by subtraction: $95,000 (total factory payroll) - $25,000 (indirect labor) = $70,000. Then multiply $70,000 by 170% (the predetermined overhead rate) to get $119,000. The journal entry would then be a debit to Work in Process for $119,000 and a credit to Factory Overhead for $119,000.

Learn more about direct labor cost here:

brainly.com/question/28295481

#SPJ3

The rate on T-bills is currently 5%. P. Tree Company stock has a beta of 1.69 and a required rate of return of 15.4%. According to CAPM, determine the return on the market portfolio.

Answers

Answer:

11.15%

Explanation:

Given that

Risk free rate of return= 5%

Beta = 1.69

Expected rate of return = 15.4%

As per capital asset pricing model

Expected rate of return = Risk free rate of return + Beta × (Market rate of return - risk free rate of return)

15.4% = 5% + 1.69 × (Market rate of return - 5%)

After solving this

Market rate of return = 11.15%

Nevada Corporation has 64,700 shares of $17 par stock outstanding that has a current market value of $140. If the corporation issues a 5-for-1 stock split, the number of shares outstanding will be:

Answers

Answer:

$323,500 shares

Explanation:

A stock split is a practice carried out by a company where stocks are split into multiples of its existing shares to boost liquidity.

There is no actual increase in the value of the shares, just an increase in the number. For example if a shareholder has 100 share and there is a 3-1 split, the shareholder will now have 3 shares for every one held before.

In this scenario total outstanding shares was 64,700 shares. The company offers a 5 for 1 stock split. Each share is now five, so new outstanding shares is 64,700 * 5= 323,500 shares

Answer:

77,640 shares

Explanation:

Stock split occur when new shares of a company are issued to existing shareholders in proportion to their current holdings.

The share outstanding after the stock split is the addition of the existing shares and the new share issued. For this question, this can be calculated as follows:

New shares to be issued = 64,700 ÷ 5 = 12,940

Number of outstanding shares after stock split = 64,700 + 12,940 = 77,640 shares

If you were looking for an advertising medium that worked for segmented audiences, had prestige, had a long shelf life, and money was of no object, which of the following would you select?a. ​interactive adsb. ​magazinesc. ​direct maild. ​televisione. radio

Answers

Answer:

The correct answer is the option B: magazines.

Explanation:

To begin with, in the case where the manager is looking for an advertising that has the characteristics of being medium and that worked for segmented audiences, with prestige and long shelf life then the correct option will be to choose a magazine that properly accomplish with the particularities of the case. The magazine will be targeted to one audience to the fact that it can not include all the topics that are in trend nowadays. Moreover, the magazine will also be of prestige in the case where it has several years in the industry and its name means something in the market. Therefore that a magazine will accomplish with all the characteristics that the advertiser is looking for.

Which of the following is not a correct interpretation of a trade-off?Having more of one thing means having less of another.
Demand of ice-cream must increase in the summer.
There is no free lunch.
One must give up something in order to obtain something else.

Answers

Answer:

D

Explanation:

A trade-off occurs when we make a choice that benefits us, but to acquire that benefit, we also have to give up something of value. Further explore the definition of trade-offs in economics, understand the concepts of opportunity costs and sacrifices, and recognize the importance of making trade-offs in a strategic manner that uses resources wisely.

15–1. Undue Influence. Juan is an elderly man who lives with his nephew, Samuel. Juan is totally dependent on Samuel’s support. Samuel tells Juan that unless he transfers a tract of land he owns to Samuel for a price 35 percent below its market value, Samuel will no longer support and take care of him. Juan enters into the contract. Discuss fully whether Juan can set aside this contract.

Answers

Answer: It is Voidable

Explanation:

Samuel took advantage of his fiduciary responsibility is taking care of Juan to unfairly influence him to sell him a piece of land at a price 35% below market price. Juan as an old man who is TOTALLY dependant on Samuel, felt he had no choice but to agree as failure to do so will lead to Samuel no longer taking care of him and this could be quite disadvantageous to him.

There was UNDUE INFLUENCE and Coercion in this scenario which means Voluntary consent was lacking.

For this reason, the contract can be voided.