The volume control on a stereo is designed so that three clicks of the dial increase the output by 10 dB. How many clicks are required to increase the power output of the loudspeakers by a factor of 100?

Answers

Answer 1
Answer:

Answer:

300 clicks...

Explanation:

Output on 3 clicks = 10 dB

Increasing 10 by a factor of 100 equals 1000 dB so,

Its simple math, clicks will also increase in the same ratio and it shall take 300 clicks to increase the volume by a factor of 100.


Related Questions

The table below shows the mass and velocity of four objects. Which object has the least inertia?A. YB. ZC. XD. W
Two loudspeakers, A and B, are driven by the same amplifier and emit sinusoidal waves in phase. The frequency of the waves emitted by each speaker is 641Hz . You are standing between the speakers, along the line connecting them and are at a point of constructive interference.How far must you walk toward speaker B to move to reach the first point of destructive interference?Take the speed of sound to be 344 .
Net force is the sum of all the forces acting on an object. If a spring balance pulls on a body with a force of 10 N, and friction acts on the body in the opposite direction with a force of 1 N, the net force would be 9 N in the direction of the spring balance (10 N – 1 N = 9 N).What is the net force acting on the object when the spring balance pulls the rope with a force of 25 N and friction acts on the body with a force of 20N?
Fuel cells have been developed that can generate a large amount of energy. For example, a hydrogen fuel cell works by combining hydrogen and oxygen gas to produce water and electrical energy. If a fuel cell can generate 10.0 kilowatts of power and the current is 15.8 amps, what is the voltage of the electricity?A. 0.63 voltsB. 158voltsC. 633 voltsD. 158,000 voltsE. 5.8 volts
For every increase in mass the gravitational force blank If the total mass increase by effective for the gravitational force

Which is the best description of the scientific theory

Answers

Explanation:

a scientific theory is a well substantiated explanation of some aspect of the nature world, based on a body of facts that have been repeatedly confirmed through observation and experiment. search fact-supported theories are not "guesses" but reliable account of the real world .

When an external magnetic field is applied, what happens to the protons in a sample?A) All protons align with the field.
B) All protons align opposite to the field.
C) Some protons align with the field and some align opposite to it.
D) All protons assume a random orientation.

Answers

On account of external magnetic field, the protons will align with the magnetic field. Hence, option (a) is correct.

The given problem is based on the concept of magnetic field. The region where the magnetic force is experienced is known as magnetic field. Generally, the protons are the charged entities carrying the positive polarity and are one of the major constituents of modern atomic structure.

  • The origin of magnetic field occurs due to charged particles present in a specific space. And the magnetic field is due to the flowing of liquid metal in the outer core of the planet generates electric currents.
  • In the condition when an external field is applied, the majority of protons align to the field because these protons tend to act like small magnets under the effect of this external field.

Thus, we can conclude that on account of external magnetic field, the protons will align with the field.

Learn more about the magnetic field here:

brainly.com/question/14848188

Answer:

Some protons align with the field and some align opposite to it.

Explanation:

Majority align to the field because these protons tend to act like small magnets under the effect of this external field

Suppose that a barometer was made using oil with rho=900 kg/m3. What is the height of the barometer at atmospheric pressure?

Answers

Hey there!

The pressure under a liquid column can be , calculated using  the following formula :

P = p x g x h  

P atm = 1.013 x 10⁵ Pa

g = 9.8 m/s²

h = ?

h =  P / ( p x g ) =

h= ( 1.013 x 10⁵ Pa ) / ( 900 x 9.8 ) =

h = ( 1.013 x 10⁵ ) / ( 8820 ) =

h = 11.48 m ≈  11.50 m

Hope this helps!

A flat disk of radius 0.50 m is oriented so that the plane of the disk makes an angle of 30 degrees with a uniform electric field. If the field strength is 713.0 N/C find the electric Tiux through the surface A) 560 Nm2/C B) 620 N·m2/C C) 160 n N.m2/C D) 280 N.m2/C

Answers

Answer:

electric flux is 280  Nm²/C  

so correct option is D 280  Nm²/C

Explanation:

radius r = 0.50 m

angle = 30 degree

field strength = 713 N/C

to find out

the electric flux through the surface

solution

we find here electric flux by given formula that is

electric flux = field strength × area× cos∅   .......1

here area = πr² = π(0.50)²

put here all value in equation  1

electric flux = field strength × area× cos∅  

electric flux = 713 × π(0.50)² × cos60

we consider the cosine of the angle between the direction of the field and the normal to the surface of the disk

so we use cos60

electric flux = 280  Nm²/C

so correct option is D 280  Nm²/C

Name at 2 areas of physics that make video games possible

Answers

Answer:

projectiles

electromagnetic

Answer:

Explanation:

física cuántica y  Quantum Moves

The minimum charge on any object cannot be less than​

Answers

Answer:

1.6 x 10^{-19} Coulombs

Explanation:

In Physics, the standard unit of measurement of a charge is Coulombs and it's denoted by C. Also, the symbol for denoting a charge is Q.

In Chemistry, electrons can be defined as subatomic particles that are negatively charged and as such has a magnitude of -1.

The minimum charge on any object such as an electron cannot be less than​ 1.6 x 10^{-19} Coulombs and it's usually referred to as the fundamental unit of charge.