What is a power machine’s “throw”A. The direct line from a tool.
B. The machine’s horsepower.
C. The speed of the machine’s moving parts.
D. The material the machine operates on.
Answers
Answer: A crankshaft is a rotating shaft which (in conjunction with the connecting rods) converts reciprocating motion of the pistons into rotational motion. Crankshafts are commonly used in internal combustion engines and consist of a series of cranks and crankpins to which the connecting rods are attached.[1]
The crankshaft rotates within the engine block through use of main bearings, and the crankpins rotate within the connecting rods using rod bearings. Crankshafts are usually made from metal, with most modern crankshafts being constructed using forged steel.
Related Questions
When is liquid electrical tape a better choice than conventional electrical tape for covering exposed conductors?
Two vehicles arrive at an uncontrolled intersection from different streets at the same time 1.The driver on the right must yield to the vehicle on the left 2. The driver on the left must yield to the vehicle on the right 3. Both vehicles must stop 4. Neither vehicle must stop
If a building is too humid, what harmful substance may be stored there?
Which of the following is the BEST example of statistical evidence?
Answers
A) Jason is correct because smaller wings can cut through air better.
Answers
The guy named Kirby didn't touch the power button on the projector. If he touched means the projector will work fine.
Explanation:
- Kirby touched the gear on the projector. He should check the projector carefully before operating the projector. But he didn't check properly.
- There was a blue rip in the projector. Kirby fails to notice the blue rip. Without minding that he has started the projector. So the tape and the projector is not working well.
- He should fix the blue rip and he should press the start button in the projector. The mistake is he didn't do that. This is the thing that made the projector ripped.
Answers
The diffraction bands would reduce.
Diffraction is the bending of a wave without any changes to the properties of the wave. During diffraction a wave changes direction of propagation.
Explanation:
The blue light would diffract less than the yellow light because the wavelength of blue light is shorter than that of yellow light in the electromagnetic radiation spectrum. Waves with shorter wavelength diffract less and are easily blocked by obstacles, especially when the obstacle is larger than the wavelength of the wave, while waves with longer wavelengths are able to diffract and pass past obstacles. This is why radio waves of longer wavelengths are ideal in communication over hilly/mountainous places
Learn More:
For more on diffraction of waves check out;
#LearnWithBrainly
Answers
Answer:
0
Explanation:
0
Answers
Answer:d
Explanation:
Most likely
a. spherical
b. polar
c. cylindrical
d. rectangular
Answers
Answer:
D. Rectangular
Explanation:
This is because rectangular coordinate systems are used in plotting common straight lines graphs with the formulae,
Y = Mx + c
Where y is the vertical coordinate
X is the horizontal coordinate
M is the dlope of the line
C is the y-axis intercept
Answer:
d. rectangular
Explanation:
Because it is the simple one and is used the most in calculations.
For example, if we want to make an equation of straight line, it would be like
here
y=vertical axis
x=horizontal axis
m= slope of straight line
c=point on y axis where line is cutting y axis
Hence, rectangular coordinate system is the simplest one and is used most commonly.