At a sales volume of 38,500 units, Choice Corporation's sales commissions (a cost that is variable with respect to sales volume) total $646,800.

Answers

Answer 1
Answer:

Answer:

$688,800

Explanation:

Calculation for the what should be the total sales commissions at a sales volume of 41,000 units

First step

Using this formula for Sales commission per unit

Sales commission per unit = Total sales commissions ÷ Unit sales

Let plug in the formula

Sales commission per unit= $646,800 ÷ 38,500 = $16.80

Second step is to calculate for the Total Sales commission by using this formula

Total sales commission = Sales commission per unit × Unit sales

Total sales commission= $61.80 × 41,000

Total sales commission =$688,800

Therefore the Total sales commission will e $688,800


Related Questions

Empirical evidence finds that the average propensity to consume is falling: A. for neither the short-run nor the long-run consumption. B. for only the long-run. C. for both the short-run and the long-run. D. for only the short-run.
An employee earns $32 per hour and 1.5 times that rate for all hours in excess of 40 hours per week. Assume that the employee worked 60 hours during the week, and that the gross pay prior to the current week totaled $46,400. Assume further that the social security tax rate was 6.0%, the Medicare tax rate was 1.5%, and federal income tax to be withheld was $515. a. Determine the gross pay for the week. $ If applicable, round your final answer to two decimal places. b. Determine the net pay for the week. $
Last year, you earned a nominal rate of return of 6.92 percent on your bond investments. During that time, the inflation rate was 2.74 percent. How much did your purchasing power increase (real rate)
Perfect Fit Company sells men's shirts and jeans. The average selling price and variable cost for each product follow: Selling price per shirt $22 Selling price per jean $27 Variable cost per shirt $14 Variable cost per jean $19 Fixed costs $3,200 Calculate the breakeven point in units assuming the sales mix is 1:1.
On January 1, 2021, Canseco Plumbing Fixtures purchased equipment for $44,000. Residual value at the end of an estimated four-year service life is expected to be $8,000. The company expects the equipment to operate for 20,000 hours. The equipment operated for 2,900 and 3,700 hours in 2021 and 2022, respectively. Required:a. Calculate depreciation expense for 2021 and 2022 using straight line method.b. Calculate depreciation expense for 2021 and 2022 using double-declining balance method.c. Calculate depreciation expense for 2021 and 2022 using units-of-production using hours operated.

Bill's Grill is a popular college restaurant that is famous for its hamburgers. The owner of the restaurant, Bill, mixes fresh ground beef and pork with a secret ingredient to make delicious quarter-pound hamburgers that are advertised as having no more than 25% fat. Bill can buy beef containing 80% meat and 20% fat at $0.85 per pound. He can buy pork containing 70% meat and 30% fat at $0.65 per pound. Bill wants to determine the minimum cost way to blend the beef and pork to make hamburgers that have no more than 25% fat. What is objective function for the mathematical formulation, in words?

Answers

Bills grill is a popular college resturant that’s is famous

What are three strategies that you can use to make better financial decisions?

Answers

Investing at a young age so you can either have a heathy amount of money or retire at a young age, try to have people work for you and not work for someone, be smart with your money and use common sense when buying something. Example: “do I really need this though?”
I would say save, invest and start a business

Attraction Corporation produces specially machined parts. The parts are produced in batches in one continuous manufacturing process. Each part is custom produced and requires special engineering design activity (based on customer specifications). Once the design is completed, the equipment can be set up for batch production. Once the batch is completed, a sample is taken and inspected to see if the parts are within the tolerances allowed. Thus, the manufacturing process has four activities: engineering, setups, machining, and inspecting. In addition, there is a sustaining process with two activities: providing utilities (plantwide) and providing space. Costs have been assigned to each activity using direct tracing and resource drivers: Engineering $1,000,000 Setups 900,000 Machining 2,000,000 Inspection 800,000 Providing space 250,000 Providing utilities 180,000 Activity drivers for each activity have been identified and their practical capacities listed: Machine hours 25,000 Setups 200 Engineering hours 5,000 Inspection hours 2,500 The costs of facility-level activities are assigned using machine hours. What is (are) the product-level activity(ies)? a.engineering b.inspecting c.setups d.All of these choices are correct.

Answers

All of the given options are unit-level activities. So, option (d) is the correct answer.

What are unit-level activities?

Activities at the unit level are carried out in order to make the product. There are four steps in this manufacturing process:

1. engineering

2. setups

3. machining

4. inspecting

Unit-level activities are dependent on the number of units generated, which means that when the number of units produced increases, more expenditures are allocated.

Engineering, setups, and inspections are all done in batches in this situation, hence they are batch-level operations.

For more information about unit-level activities, refer below

brainly.com/question/15047575

Answer:

Attraction Corporation produces specially machined parts. The parts are produced in batches in one continuous manufacturing process. Each part is custom produced and requires special engineering design activity (based on customer specifications). Once the design is completed, the equipment can be set up for batch production. Once the batch is completed, a sample is taken and inspected to see if the parts are within the tolerances allowed. Thus, the manufacturing process has four activities: engineering, setups, machining, and inspecting. In addition, there is a sustaining process with two activities: providing utilities (plantwide) and providing space. Costs have been assigned to each activity using direct tracing and resource drivers:

Explanation:

Retail managers can use ________ to determine which inventory items require the most attention. a. EOQ modeling

b. CPS scheduling

c. Breakeven analysis

d. ABC analysis

Answers

Answer: (D) ABC analysis

Explanation:

 ABC analysis is one of the type of inventory method that are basically divided into the three main categories that is A,B and the C categorization.

 The main advantage of this type of analysis is that it is categorized on the quantity and the values basis and this analysis is basically keeps the cost in the business under the control. It is also known as the inventory management and the ABC analysis contributed in the overall profit in an organization.

According to the question, the retail manager basically using the ABC analysis for determining the inventory items in the system.

Therefore, Option (D) is correct.

The following trial balance of Reese Corp. at December 31, 2017 has been properly adjusted except for the income tax expense adjustment.Reese Corp.Trial BalanceDecember 31, 2017Dr. Cr.Cash $ 875,000 Accounts receivable (net) 2,695,000 Inventory 2,085,000 Property, plant, and equipment (net) 7,566,000 Accounts payable and accrued liabilities $ 1,761,000Income taxes payable 654,000Deferred income tax liability 85,000Common stock 2,350,000Additional paid-in capital 3,680,000Retained earnings, 1/1/17 3,490,000Net sales and other revenues 13,560,000Costs and expenses 11,180,000 Income tax expenses 1,179,000 $25,480,000 $25,480,000Other financial data for the year ended December 31, 2017:• Included in accounts receivable is $1,200,000 due from a customer and payable in quarterly installments of $150,000. The last payment is due December 29, 2019.• The balance in the Deferred Income Tax Liability account pertains to a temporary difference that arose in a prior year, of which $20,000 is classified as a current liability.• During the year, estimated tax payments of $525,000 were charged to income tax expense. The current and future tax rate on all types of income is 30%.In Reese's December 31, 2017 balance sheet,The current assets total is: ????The current liabilities total is: ????The final retained earnings balance is: ????

Answers

Answer:

$5,055,000  TOTAL CURRENT ASSETS  

$2,435,000  TOTAL CURRENT LIABILITIES  

$4,691,000  Retained Earnings  

Explanation:

2017 Balance Sheet

$875,000 Cash

$2,095,000 Accounts Receivable

$2,085,000 Inventories

$5,055,000  TOTAL CURRENT ASSETS  

$7,566,000 Property, plant, and equipment

$600,000 Accounts Receivable

$8,166,000  TOTAL NONCURRENT ASSETS  

$13,221,000  TOTAL ASSETS  

$1,761,000  Accounts Payable  

$20,000  Deferred Income Tax Liability  

$654,000  Income Tax Payable  

$2,435,000  TOTAL CURRENT LIABILITIES  

$65,000  Deferred Income Tax Liability  

$65,000  TOTAL NONCURRENT LIABILITIES  

$2,500,000  TOTAL LIABILITIES  

$2,350,000  Common Stock  

$3,680,000  Paid in Capital  

$4,691,000  Retained Earnings  

$10,721,000  TOTAL EQUITY  

$13,221,000  TOTAL EQUITY + LIABILITIES  

Income Statement 2021

Sales $13.560,000

Cost and Expenses -$11.180,000

Net Income Before Taxes and Int $2.380,000

Interest Expenses -$1.179,000

Net Income Before Taxes $1.201,000

A home mortgage that can be repaid over a 30-year period is an example of:A. a line of credit.

B. a student loan.

C. a short-term loan.

D. a long-term loan.

Answers

Answer:

D. a long-term loan.

Explanation:

Loans are classified based on varied parameters. There are secure and unsecured loans,  installment credit and revolving credit.  Also, there loans with fixed interest rates and others with variable interest rates.

Loans are also categorized depending on the duration it takes to repay them.  Short term loans are those repaid with one year. For businesses, these loans are short term liabilities.

Long-term loans take longer than one year to repay. The mortgage is to be paid over 30 years period. To businesses, these loans are long-term liabilities.