Can you Explain how to do this plz

Answers

Answer 1

Answer: it is -18 because -18 divided by 6 is -3. then -5+-3 is -8

Related Questions

How to write an equivalent expression for n times a using only addition
The Singh family ordered a large pizza with a diameter of 20 inches for dinner. If one of the members of the family ate one eighth of the pizza, how many square inches of pizza are remaining? Use 3.14 for π.274.75 square inches39.25 square inches314 square inches157 square inches
How many #5 cans of potato salad are required to serve 210 people if each can has 3 pounds 8 ounces of potato salad and each serving is 5 ounces
A. A business is attempting to find the best small town in the United States in which to relocate. As part of the investigation, the elevations of all small towns in the United States are researched. Some towns are located high in the Rockies with elevations over 8,000 feet. There are even some towns located in the south central valley of California with elevations below sea level. These elevations can best be described as which level of datab. The unemployment rate is often used as an indicator of a community’s economic vitality. An unemployment rate is best described as what level of measurement?
If the diameter of the circle is above 20mm what is the area

2. How would you hold your bowl to eat in China?

Answers

Answer:

you hold the bowl with your thumb on the rim and then support it on the side with the rest of your fingers

Step-by-step explanation:

plz vote brainliest

A linear function and a quadratic function both have a domain of all real numbers.True
False
?

Answers

Answer: True

Explanation: The domain of a quadratic function in standard format is always all real numbers, meaning you can substitute any real number for x. The range of a function is the set of all real values of y that you can get by plugging real numbers into x.

Linear function is almost always going to be all real numbers. The range of a non-horizontal linear function is all real numbers no matter how flat the slope might look.

true....
the range of the function shows all real values

B(n)=2^n A binary code word of length n is a string of 0's and 1's with n digits. For example, 1001 is a binary code word of length 4. The number of binary code words, B(n), of length n, is shown above. If the length is increased from n to n+1, how many more binary code words will there be? The answer is 2^n, but I don't get how they got that answer. I would think 2^n+1 minus 2^n would be 2. Please help me! Thank you!

Answers

Answer:

More number of words that can be made: $\bold{2^n}$

Please refer to below proof.

Step-by-step explanation:

Given that:

The number of binary code words that can be made:

$B(n) =2^n$

where n is the length of binary numbers.

Binary numbers means 2 possibilities either 0 or 1.

Here, suppose if we have 5 as the length of binary number.

And there are 2 possibilities for each digit.

So, total number of possibilities will be $2* 2* 2* 2* 2 = 2^5$

If the length of binary number is 2.

The total words possible are $2^2$ .

These numbers are:

{00, 01, 10, 11}

If the length of binary number is 3. (increasing the 'n' by 1)

The total words possible are $2^3$ .

These words are:

{000, 001, 010, 100, 011, 101, 110, 111}

So, number of More binary words = 8 - 4 = 4 or $2^2$ or $2^n$ .

So, the answer is $2^n$ .

Let us try to prove in generic terms:

$B(n) = 2^n$

Increasing the n by 1:

$B(n+1) = 2^(n+1)$

Number of more words made by increasing n by 1:

$B(n+1) -B(n)= 2^(n+1) -2^n\n\Rightarrow 2* 2^(n) -2^n\n\Rightarrow 2^n(2-1)\n\Rightarrow \bold{2^n}$

Hence, proved that:

More number of words that can be made: $\bold{2^n}$

Final answer:

When the length of a binary code word increases from n to n+1, the number of additional binary code words is equal to the number of binary code words of length n, which is $2^n$ .

Explanation:

When the length is increased from n to n+1, the number of binary code words of length n+1 is equal to the number of binary code words of length n multiplied by 2. This is because for each binary code word of length n, we can append a 0 or a 1 to create two new binary code words of length n+1. Therefore, the number of additional binary code words is equal to the number of binary code words of length n, which is $2^n$ .

Learn more about Binary code words here:

brainly.com/question/31753265

#SPJ3

The health of the bear population in yellowstone national park is monitored by periodic measurements. a sample of 54 bears has a mean weight of 182.9 lb. assuming the standard deviation is known to be 121.8lb find a 99% confidence intreval estimate

Answers

The 99% confidence interval will be found as follows:
x_bar +/- z(σ/√n)
where
z- z-score
σ-sigma
n=sample size
thus from the information given we shall have:
182.9+/-2.58(121.8/√54)
=182.9+/-42.7632
=225.6632 or 140.1368

Help me please! It’s number 45.

Answers

I’m pretty sure it this if not sorry

The Graduate Record Examination (GRE) is a standardized test that students usually take before entering graduate school. According to the document Interpreting Your GRE Scores, a publication of the Educational Testing Service, the scores on the verbal portion of the GRE are (approximately) normally distributed with mean 462 points and standard deviation 119 points. (6 p.) (a) Obtain and interpret the quartiles for these scores. (b) Find and interpret the 99th percentile for these scores

Answers

Answer:

(a) The first quartile is 382.27 and it means that at least el 25% of the scores are less than 382.27 points.

The second quartile is 462 and it means that at least el 50% of the scores are less than 462 points.

The third quartile is 541.73 and it means that at least el 75% of the scores are less than 541.73 points.

(b) The 99th percentile is 739.27 and it means that at least el 99% of the scores are less than 739.27 points.

Step-by-step explanation:

The first, second the third quartile are the values that let a probability of 0.25, 0.5 and 0.75 on the left tail respectively.

So, to find the first quartile, we need to find the z-score for which:

P(Z<z) = 0.25

using the normal table, z is equal to: -0.67

So, the value x equal to the first quartile is:

$z=(x-m)/(s)\n x=z*s +m\nx =-0.67*119 + 462\nx=382.27$

Then, the first quartile is 382.27 and it means that at least el 25% of the scores are less than 382.27 points.

At the same way, the z-score for the second quartile is 0, so:

$x=0*119+462\nx=462$

So, the second quartile is 462 and it means that at least el 50% of the scores are less than 462 points.

Finally, the z-score for the third quartile is 0.67, so:

$x=z*s +m\nx =0.67*119 + 462\nx=541.73$

So, the third quartile is 541.73 and it means that at least el 75% of the scores are less than 541.73 points.

Additionally, the z-score for the 99th percentile is the z-score for which:

P(Z<z) = 0.99

z = 2.33

So, the 99th percentile is calculated as:

$x=z*s +m\nx =2.33*119 + 462\nx=739.27$

So, the 99th percentile is 739.27 and it means that at least el 99% of the scores are less than 739.27 points.

Other Questions

A quadrilateral has angles that measure 44°, 89°, and 127°. What is the measure of the fourth angle?

A line segment is dilated by a scale factor of 2 centered at a point not on the line segment. Which statement regarding the relationshipbetween the given line segment and its image is true?A The line segments are parallel, and the image is twice the length of the given line segment.B. The line segments are parallel, and the image is one-half of the length of the given line segment.C. The line segments are perpendicular, and the image is twice the length of the given line segment.DD The line segments are perpendicular, and the image is one-half of the length of the given line segment.

The product of 2 and a number x is 4. What is the value of 2×4×1=

Cameron bought a used car for $4,500. He made a down payment of $1,200 and agreed to pay the remaining balance in monthly payments of $300 each.Which equation can be used to find m, the number of months it will take Cameron to pay off his car? (7.10A)F 4,500 = 1,200 + 300mF 4,500 = 1,200 + 300mG 4,500 = –300 + 1,200mG 4,500 = –300 + 1,200mH 4,500 = 300 + 1,200mH 4,500 = 300 + 1,200mJ 4,500 = 1,200 – 300mJ 4,500 = 1,200 – 300m