What other type of energy could be created using a circuit?

Answers

Answer 1

Answer: Heat energy and Kinetic energy can be created using a circuit.

Related Questions

How does the vibration of a drumhead cause a sound wave to form?
Why do scientists look for asteroids that might strike our planet?
A material that does not allow heat to be transferred to a easy is known as
Draw arrows to show how the forces of thrust,drag,and Gravity act on a racing car as it moves forward
A ball is moving at 7.0 m/s and has a momentum of 100kg.m/s. What is the balls mass?

A 2.0 kg guinea pig runs at a speed of 1.0 m/s what is the guinea pigs kinetic energy

Answers

The kinetic energy (KE) is calculated using the formula KE = 1/2 * m * v^2, resulting in a kinetic energy of 1.0 Joule for a 2.0 kg guinea pig moving at a speed of 1.0 m/s.

The kinetic energy (KE) of an object in motion is determined by the formula: KE = 1/2 * m * v^2, where m is the mass and v is the velocity. For the guinea pig in question, with a mass (m) of 2.0 kg and a velocity (v) of 1.0 m/s, the calculation is as follows:

KE = 1/2 * 2.0 kg * (1.0 m/s)^2

KE = 1/2 * 2.0 kg * 1.0 m^2/s^2

KE = 1.0 kg * 1.0 m^2/s^2

KE = 1.0 Joule

Therefore, the kinetic energy of the 2.0 kg guinea pig running at a speed of 1.0 m/s is 1.0 Joule.

The kinetic energy for the above data is 1.0000 J.

How long does it take to change a flat plain into mountains?

Answers

It would take millions of years to form a mountain as plates move very slowly and to form it first one plate should climb upon another. After this very slowly this hill will convert into a mountain.

Explain why buildings are wired using parallel circuits rather than series circuits

Answers

In a series circuit . . .

There is only one path for current to take.

All the way from one terminal of the power supply, through all of
the lights, computers, vending machines, air conditioners and
everything else in the building, to the other terminal of the electric
supply. One path !

So the current for EVERY device has to flow through ALL of them,
because that's the only path there is.

If any ONE device in the building was turned off, burned out, or
unplugged from the outlet, then there would be NO PATH for the
current, and everything in the building would lose power !

Not a very convenient way to operate a house or a building.

How is acceleration of the cart related to the amount of force acting on it? the strips of it?

Answers

We know that Newton's Second Law of Motion states that -

$F = ma$

It is clear that acceleration is directly proportional to the Force acting on a body. So, the amount of Force acting on a body is directly proportional to the acceleration, when the mass is constant.

Force on the cart is directly proportional to the acceleration.

This relationship was given be Sir Isaac Newton.

Mathematically ;

F = ma

Where F is force, a is acceleration and m is constant of proportionality , also known as mass.

When a space shuttle was launched, the astronauts aboard experienced and acceleration of 29.0 m/s. If one of the astronauts had a mass of 69.0 kg, what net force in newtons did the astronaut experience?

Answers

   Net force = (mass) · (acceleration)

   = (69 kg) · (29 m/s²)

   = (69 · 29) · (kg·m/s²)

   = 2,001 Newtons upward
   (about 450 pounds)

What impact did Sir Isaac Newton have on modern society?

Answers

Sir Isaac Newton laid the foundations for the creation of modern calculus through his work in the field of mathematics. His discovery of formulas that could be used to derive the areas of curved objects led to many of the mathematical breakthroughs of the last two centuries. He also helped in the field of science by discovering laws such as the universal gravitation law.

Other Questions

Why do plates move away from the mid - ocean ridges?

Use the drop-down menus to complete the statement.If an electric circuit has 0 A of current running through it, then theA. charge B. resistance C. Voltage must be A. NegativeB. ZeroC. Positive

Simple Machine Lever: A ________ that pivots on top of a fixed point called a _______.

A block of lead has dimensions of 4.50cm by 5.20cm by 6.00cm. The block weighs 1587g. From this information, calculate the density of the lead.