Is hydrogen malleable, ductile or brittle

Answers

Answer 1
Answer: Hydrogen is a gas, therefore it is neither ductile or brittle. we can not smash it with a mallet. nor break it in half. Its a gas.
Answer 2
Answer:

Final answer:

Hydrogen is a nonmetal that does not exhibit properties such as malleability or ductility. Hydrogen is a unique element in the universe and its physical and chemical properties differ markedly from malleable or ductile elements, such as metals. Thus, hydrogen is neither malleable, ductile, nor brittle.

Explanation:

Hydrogen is a unique element in the universe, and its physical and chemical properties differ significantly from those of elements that are classified as malleable or ductile, such as metals. Properties such as being shiny, malleable, and ductile are characteristics of metals which can be deformed without breaking or drawn into wires, and they conduct heat and electricity well. However, hydrogen is a nonmetal and under normal conditions, it is relatively inactive chemically. It does not demonstrate properties like malleability or ductility as metals do. Hence, hydrogen is not malleable, ductile, or brittle.

Learn more about Hydrogen here:

brainly.com/question/31018544

#SPJ2


Related Questions

1.00l of octane (M=114.23 g/mol, d=0.703 g/cm3) undergoes a combustion reaction with 5.0 L of oxygen at 25 celcius and 1.0 atm pressure. what mass of co2 (M=44.01 g/mol) is produced?
How much energy is wasted as heat by an incandescent light globe
Which of the following is an example of a chemical change? A. melting solid gold B. burning hydrogen gas C. breaking a sheet of glass D. dissolving sugar in water
What happens to water once it reaches earths surface?
How do i describe how a constant volume calorimeter can be used to measure the heat transferred from a burning piece of coal to cool water.

Type of change that produces a new substance

Answers

A chemical change produces a new substances. Examples of chemical changes are burning a cooking egg
The type of change that produces a new substance is called a chemical change. A chemical change breaks bonds and also forms new ones. 

Example: Rusting Iron. 

The concentration of a solution can be expressed in(I ) milliliters per minute
(2) parts per million
(3) grams per Kelvin
(4) joules per gram

Answers

Answer:

(2) parts per million

Explanation:

Concentration of a solution can be expressed in terms of parts-per-million (ppm).

ppm is usually used in the context of measuring very small concentrations particularly the amount of contaminants. It represents 1 part of the contaminant in 100000 parts of the total.

It is expressed as:

1 ppm = 1 mg / L

1 ppm = 1 mg/ Kg

(I ) milliliters per minute
(2) parts per million
(3) grams per Kelvin
(4) joules per gram

igneous rock that cools very quickly when it forms may have a texture that is______and______with no visible____

Answers

Igneous rocks that cools very quickly when it forms may have a texture that is smooth and shiny with no visible grains.

What are igneous rocks?

Igneous rocks also called as magmatic rocks is one of the three main rock type present the other two being sedimentary and metamorphic rocks.These rocks are formed by cooling and solidification of magma or lava .

The magma is derived from from partial melts of rocks which are existing  in the earth's crust or mantle.Melting is caused by one of the three processes increase in temperature, change in composition  or decrease in pressure.

Igneous rocks are classified based  according o their occurrence, texture, chemical composition or mineral content.According to their mode of occurrence they are classified as intrusive or extrusive igneous rocks.

Learn more about igneous rocks,here:

brainly.com/question/23555197

#SPJ6

Igneous rock that cools very quickly when it forms may have a texture that is smooth and shiny with no visible grain.

Which renewable energy sources should be developed in your area, and why? Consider abundance of the energy source, ease of setup in your area, and cost.Review the seven questions.

Write a few sentences summarizing what you already know about these topics.

Answers

Final answer:

The choice of renewable energy sources to be developed depends on the geographical and environmental characteristics of an area. Wind and tidal energy could be suitable for a coastal region, solar energy might be ideal for a sunny, arid region, and biomass energy could work well in forested areas. Setup and costs can vary depending on the specific circumstances.

Explanation:

The optimal types of renewable energy sources to be developed in a given area typically depend on the environmental and geographic factors of that area. In a coastal region, for example, harnessing wind energy and tidal energy could be very appropriate and effective. Wind turbines can be set up onshore or offshore to generate electricity from the consistent and powerful coastal winds, while tidal power plants can harness the energy of incoming and outgoing tides.

On the other hand, in a sunny, arid region like a desert, solar energy would likely be the most feasible and abundant source of renewable energy. Solar panels can be efficiently installed in these areas to convert sunlight directly into electricity.

Finally, in an area with abundant biomass resources (such as forested areas), biomass energy can be a good choice. This form of energy uses organic materials (like wood, crop waste, or even algae) to create heat, fuel, or electricity.

The ease of setup and costs associated with each type of renewable energy source can vary significantly depending on the specific factors of each location, as well as the type and scale of the energy project.

Learn more about Renewable Energy Sources here:

brainly.com/question/34160748

#SPJ2

Answer:

There is a lot but here are some!

Wind: Wind power is growing rapidly, and is becoming a well-recognized renewable energy resource. Using wind power to turn turbines that generate electricity can provide a cheap source of energy. Building and maintaining equipment could provide thousands of jobs and cost-efficient and clean electricity. Wind farms, however, are not particularly popular. They can impact local environment and wildlife, and even provide noise pollution. Additionally, many people feel that the equipment used obstructs scenic views.

Solar: This is perhaps the most recognized renewable energy source. Energy from the sun is captured using cells made from special materials (silicon is quite popular right now) and then converted into electricity. The biggest factor in solar cell production is cost. However, with technological advancements solar is becoming more cost efficient, and high efficiency solar cells are being developed. This is important, since high efficiency cells are hard to come by. New materials are providing solar cells that are easier to transport and install. Flexible solar cells can be used for residential use, and building solar arrays is becoming popular. One of the main factors in efficiency is the fact that solar panels only generate electricity during daylight hours, and can be hampered by cloudy conditions or pollution. Some sort of storage is needed in order to make full use of solar power.

Water: We have been studying water-based renewable energy for quite some time. Hydroelectricity has been a source of energy for years. However, even though the energy production process does not put off pollution, there are other environmental concerns associated with the damming of rivers and ecological impacts stemming from this practice. But hydroelectric power remains one of the more cost-efficient means of generating renewable energy.

Geothermal: Geothermal energy is extracted from the natural processes of the earth. A great deal of heat is created below Earth's surface, and efforts are being made to extract and use this power. While the ancient Romans knew about and used geothermal heating, now Earth's processes are being used to generate electricity -- going beyond space heating. Geothermal power does not put off greenhouse gases (although some harmful gases from deep in the earth would be released -- and need to be contained), and it is reliable. However, it can only be used in areas where there is tectonic activity.

Nuclear: Perhaps the most controversial form of renewable energy is nuclear energy. Electricity is produced from the energy released by nuclear reactions. While fission (splitting) is the main source used today, interest continues in developing cold fusion. Currently, though, power plants generating power using nuclear fission are among the safest plants. They also generate power without emitting pollution. In Europe, France benefits greatly as its nuclear energy produces the cheapest electricity (according to 60 Minutes).

Wat is the difference between solution solvent an solute

Answers

The solvent is what dissolves the solute. The solute is the object that is being dissolved. The solvent is what dissolves it. And a solution is an even mixture of both the solvent and solution. I hope I helped!

PLEASEEEEE CAN SOMEONE HELP MEEE??? (iI have TWO questions PLSPLSPLSPSLPLSPLSPLSP)

3.) What happened to Patroclus at the end of yesterday's reading?

He won the battle.

He went to Mt. Olympus to talk to Zeus.

He died.

-------------------------------------------------------------------------------------------------------

4.Who was Agamemnon trying to persuade to come fight with him again?

Patroclus

Achilles

Odysseus

Hector

2. A solution in which 50 grams of salute is dissolved in 250 grams of solution has a concentration of

Answers

The fact that the unit is supposed to be in percent makes me think it is referring to percent mass.  To find percent mass you need to find find the divide the mass of solute by the total mass of solution and than multiply that by 100%.
%mass=(50g/300g)x100%
%mass=0.167%

I hope this helps.