Why must soft iron be used with an electromagnet?

Answers

Answer 1
Answer: The soft iron inside the coil makes the magnetic field stronger because it becomes a magnet itself when the current is flowing. Soft iron is used because it loses its magnetism as soon as the current stops flowing.
Answer 2
Answer:

Answer: it is easily magnetized

Explanation:


Related Questions

The ph of a buffer does not depend much on the concentrations of its acid–base conjugate pair because
A change in which property of light will have no effect on whether or not the photoelectric effect occurs??? Frequently energy intensity and wavelength
Which of the following ions has a smaller size? Option 1: O2- Option 2: F- Option 3: They have the same size. Option 4: None of the above.
Which makes the phosphorus cycle different from the carbon cycles
What is the speed of a man that travels 2 meters in 6.5 seconds?

Which statement best describes gamma radiation?(1) It has a mass of 1 and a charge of 1.
(2) It has a mass of 0 and a charge of –1.
(3) It has a mass of 0 and a charge of 0.
(4) It has a mass of 4 and a charge of +2.

Answers

The correct answer is option 3. Gamma radiation is a type of electromagnetic radiation which is characterized by having the smallest wavelength resulting to having the most energy in the electromagnetic spectrum. Gamma radiation has no mass and no charge.

Matter is made up of very small particles called

Answers

Matter is made up of very small particles called Atom.

What is an Atom ?

An atom is the smallest unit of ordinary matter that forms a chemical element.

Every solid, liquid, gas, and plasma is composed of neutral or ionized atoms. Atoms are extremely small, typically around 100 picometers across.

An atom consists of a central nucleus that is usually surrounded by one or more electrons. Each electron is negatively charged. The nucleus is positively charged, and contains one or more relatively heavy particles known as protons and neutrons.

An atom is a particle of matter that uniquely defines a chemical element.

Therefore, Matter is made up of very small particles called Atom.

Learn more about atom here ;

brainly.com/question/1566330

#SPJ6

Matter is made up of very small particles called ''Atom'

An atom are the basic building blocks of ordinary matter. Atoms can join to form molecules, which in turn from most of the objects around you.

Atoms are composed of particles called protons, electrons, and neutrons.

Protons
carry a positive electrical charge.
Electrons carry a negative electrical charge.
Neutrons carry no electrical charge at all.

Hope i helped! And i know you didn't ask for all that, but i put by the way. If you need anything else ask me.

The decomposition of ammonium hydrogen sulfideNH4HS (s) <=> NH3 (g) + H2S (g)
is an endothermic process. A 6.1589-g sample of the solid is placed in an evacuated 4.000-L vessel at exactly 24°C. After equilibrium has been established, the total pressure inside is 0.709 atm. Some solid NH4HS remains in the vessel.
(a) What is the KP for the reaction?
(b) What percentage of the solid has decomposed?
(c) If the volume of the vessel were doubled at constant temperature, what would happen to the amount of solid in the vessel?

Answers

Answer:

(a) Kp = 0.126

(b) 48.1 %

(c) More of the solid will decompose, therefore it will decrease.

Explanation:

(a) We have here the equilibrium decomposition of NH₄HS, according to the equation:

NH₄HS (s) ⇄ NH₃ (g) + H₂S

with an equlibrium cosnstant, Kp, given by

Kp = pNH₃ x pH₂S

where pNH3 and pH₂S are  the partial pressures of NH₃ and H₂S .

Since 1 mol NH₃ is produced for every 1 mol H₂S, it follows that the partial pressure of NH₃ is equal to the partial pressure of H₂S ( from ideal gas law  the pressure is proportional to number of mol):

pNH₃ = pH₂S = 1/2 (0.709) atm = 0.355 atm

and

Kp = 0.355 x 0.355 = (0.3545) ² = 0.126

(b) To solve this part we need to do a calculation based on the stoichiometry of the reaction by calculating the number of moles, n,  a partial pressure of 0.355 atm represent.

From the ideal gas law we can calculate it:

PV = nRT ⇒ n = PV/RT

where  P = 0.355 atm, V = 4.000 L, T = ( 24 + 273 ) K, and R is the gas constant 0.08205 Latm/Kmol.

n = 0.355 atm x 4.000 L / 0.08205 Latm/Kmol x 297

n = 0.058 mol

Now we can relate this 0.058 mol of NH₃ ( or H₂S ) to the number of moles of moles of NH₄HS that must have decompesed. Since it is a 1: 1 ratio:

(1 mol NH₄HS / 1 mol NH₃ ) x 0.058 mol NH₃  = 0.058 mol NH₄HS

Having the molar mass of NH₄HS, 51.11 g/mol we can calculate its mass:

0.058 mol NH₄HS x 51.11 g/mol =  2.9644 g

Percentage decomposition is then equal to:

2.9644 / 6.1589 g x 100 g = 48.1 %

(c) If the volume of the vessel, effectively we are reducing the pressure by a half , and the system will react according to LeChatelier's principle by producing more gaseous products to reach equilibrium again. Therefore, more of the solid NH₄HS will decompose, and the amount of it will we reduced compared to the previous part.

In the compound KHSO4, there is an ionic bond between the1) KH+ and SO42– ions
2) KHSO3+ and O2– ions
3) K+ and HS– ions
4) K+ and HSO4– ions.

Answers

In the compound KHSO4, there is an ionic bond between the K+ and HSO4– ions.

Ionic bond is a type of bond that is formed between metals and non metals. During the reaction, metals usually donate electron[s] to non metals. The metals thus become positively charged while the non metals become negatively charged. Therefore, ionic compound are usually composed of charged particles. For the ionic compound given above, the charged particles in the compound are K+ and HSO4- ions.

4) K+ and HSO₄⁻
potassium ion react with  Hydrogen Sulfate ion

Absolute proof about the origin of a crater on the moon or the "star of Bethlehem" cannot be determinedusing the scientific method.
True
False

Answers

Correct Answer: TRUE

The other answer is incorrect, I just did the assignment and got it right.

your answer is False love!

How much energy is passed to the next trophic level in the food chain?

Answers

Answer:

10%

Explanation:

Out of the original layer, only ten percent is transferred to the next