1 Define Engineering

2 Engineering use a (n) _______ process to solve problems

Answer:

8 to 10 times

Explanation:

For dry road

u= 15 mph        ( 1 mph = 0.44 m/s)

u= 6.7 m/s

Let take coefficient of friction( μ) of dry road is 0.7

So the de acceleration a = μ g

a= 0.7 x 10  m/s ²                         ( g=10 m/s ²)

a= 7 m/s ²

We know that

v= u - a t

Final speed ,v=0

0 = 6.7 - 7 x t

t= 0.95 s

For snow road

μ = 0.4

de acceleration a = μ g

a = 0.4 x 10 = 4 m/s ²

u= 30 mph= 13.41 m/s

v= u - a t

Final speed ,v=0

0 = 30 - 4 x t'

t'=7.5 s

t'=7.8 t

We can say that it will take 8 to 10 times more time as compare to dry road for stopping the vehicle.

8 to 10 times

Lathe is the manufacturing tools machines parts by moving the part into the cutting tool.

Explanation:

• The metals, other materials or wood are shaped as pieces using the machine tool which is lathe.
• Lathe is identified as three kinds: Engine lathe, Special purpose lathe, Turret lathe.
• Semi-portable and bench mounted are smaller ones.
• Floor mounted are large lathe it needs special transportations to move.
• Engine lathe can be moved from one area to another because its not too large. The lathe which is adapted many operations are used in maitanance shop.
• Special purpose lathe and Turret lathe is used in mass production.

Answer:

For me the answer was “the outcome of a series of scientific experiments”

Explanation:

Carbon dioxide is a harmful substance may be stored there, If a building is too humid.

What is humid?

Humidity is a measurement of the amount of water vapour in the atmosphere. If there is a lot of water vapour in the air, the humidity will be high. As the humidity increases, it feels more humid outside. In weather reports, humidity is frequently described using the word "relative humidity."

It normally has a temperature of at least 90 °F and a relative humidity of at least 30% when the air is hot and humid.

Because excessive humidity slows down perspiration evaporation, humid heat is riskier than dry heat. Patients may endure organ failure, a rapid heartbeat, high blood pressure, and even death if they are not given the chance to cool off.

Thus, it is Carbon dioxide.

For more information about humid, click here:

brainly.com/question/22069910

#SPJ2

Answer:

carbondioxide

Explanation:

Advantages of liquid electrical tape over conventional electrical tape for covering exposed conductors is given below.

Explanation:

• Electrical tape and "regular" adhesive tape is that electrical tape is stretchy. This allows the tape to wrap around a wire junction and still grab the insulation to either side. This helps keep the tape in place.Where as Regular tape is likely to get stiff, lose adhesion, and slide away from the joint, leaving it exposed.
• The electrical tape is able to withstand much more heat and like the others said the adhesive is better and it can stretch 200 percent.
• Electrical tape is a suitable long-term or  permanent solution in various applications.Heat-shrink sleeving, spiral wrap, flexible conduit, self-amalgamating tape, rubber sleeves, junction boxes, table ties/clips, grommets, cable markers, etc. are all better solutions for almost any given use of electrical tape other than to conventional electrical tape which has temporarily hold, bundle, insulate, or mark a cable.
• This kind of type is often used by electricians. It's typically made of slightly stretchy PVC vinyl, and is backed with a pressure sensitive rubber-type adhesive. It has good insulative properties, and is perfect for protecting wire splices and providing extra insulation on electrical cords. it's also available in a variety of other colors (like red, green, yellow, green, and white) that can be used for color-coding.

Answer:

repair of inverters and anything that has to do with solar energy...that is power from the sun