Which renewable energy sources should be developed in your area, and why? Consider abundance of the energy source, ease of setup in your area, and cost.Review the seven questions.

Write a few sentences summarizing what you already know about these topics.

Answers

Answer 1
Answer:

Final answer:

The choice of renewable energy sources to be developed depends on the geographical and environmental characteristics of an area. Wind and tidal energy could be suitable for a coastal region, solar energy might be ideal for a sunny, arid region, and biomass energy could work well in forested areas. Setup and costs can vary depending on the specific circumstances.

Explanation:

The optimal types of renewable energy sources to be developed in a given area typically depend on the environmental and geographic factors of that area. In a coastal region, for example, harnessing wind energy and tidal energy could be very appropriate and effective. Wind turbines can be set up onshore or offshore to generate electricity from the consistent and powerful coastal winds, while tidal power plants can harness the energy of incoming and outgoing tides.

On the other hand, in a sunny, arid region like a desert, solar energy would likely be the most feasible and abundant source of renewable energy. Solar panels can be efficiently installed in these areas to convert sunlight directly into electricity.

Finally, in an area with abundant biomass resources (such as forested areas), biomass energy can be a good choice. This form of energy uses organic materials (like wood, crop waste, or even algae) to create heat, fuel, or electricity.

The ease of setup and costs associated with each type of renewable energy source can vary significantly depending on the specific factors of each location, as well as the type and scale of the energy project.

Learn more about Renewable Energy Sources here:

brainly.com/question/34160748

#SPJ2

Answer 2
Answer:

Answer:

There is a lot but here are some!

Wind: Wind power is growing rapidly, and is becoming a well-recognized renewable energy resource. Using wind power to turn turbines that generate electricity can provide a cheap source of energy. Building and maintaining equipment could provide thousands of jobs and cost-efficient and clean electricity. Wind farms, however, are not particularly popular. They can impact local environment and wildlife, and even provide noise pollution. Additionally, many people feel that the equipment used obstructs scenic views.

Solar: This is perhaps the most recognized renewable energy source. Energy from the sun is captured using cells made from special materials (silicon is quite popular right now) and then converted into electricity. The biggest factor in solar cell production is cost. However, with technological advancements solar is becoming more cost efficient, and high efficiency solar cells are being developed. This is important, since high efficiency cells are hard to come by. New materials are providing solar cells that are easier to transport and install. Flexible solar cells can be used for residential use, and building solar arrays is becoming popular. One of the main factors in efficiency is the fact that solar panels only generate electricity during daylight hours, and can be hampered by cloudy conditions or pollution. Some sort of storage is needed in order to make full use of solar power.

Water: We have been studying water-based renewable energy for quite some time. Hydroelectricity has been a source of energy for years. However, even though the energy production process does not put off pollution, there are other environmental concerns associated with the damming of rivers and ecological impacts stemming from this practice. But hydroelectric power remains one of the more cost-efficient means of generating renewable energy.

Geothermal: Geothermal energy is extracted from the natural processes of the earth. A great deal of heat is created below Earth's surface, and efforts are being made to extract and use this power. While the ancient Romans knew about and used geothermal heating, now Earth's processes are being used to generate electricity -- going beyond space heating. Geothermal power does not put off greenhouse gases (although some harmful gases from deep in the earth would be released -- and need to be contained), and it is reliable. However, it can only be used in areas where there is tectonic activity.

Nuclear: Perhaps the most controversial form of renewable energy is nuclear energy. Electricity is produced from the energy released by nuclear reactions. While fission (splitting) is the main source used today, interest continues in developing cold fusion. Currently, though, power plants generating power using nuclear fission are among the safest plants. They also generate power without emitting pollution. In Europe, France benefits greatly as its nuclear energy produces the cheapest electricity (according to 60 Minutes).


Related Questions

What is the difference between fats and oils? A. Oils are lipids and fats are proteins. B. At room temperature, fats are solid and oils are liquid. C. Fats are lipids and oils are carbohydrates. D. Fats are triglycerides and oils are waxes.
water in a pan over a radiator evaporates much faster than a water pan in a table ???? i need help ppl
A block of wood has a mass of 120g and a volume of 200cm what is the density
What is chemical change also referred to
What is number 1 and 2

You have probably noticed that some liquids, such as honey and molasses, flow slowly at room temperature. How does heating affect flow rate?​

Answers

Answer:

Viscosity of water decreases markedly with increasing temperature. When the viscosity decreases, the flow resistance decreases. So for the same driving force, that is the pressure drop per unit length, the water flow rate will be higher.

Hope this helps :)

What type of bond is methane?

Answers

It has 1 carbon atom and 4 hydrogen atoms, it is also know as a saturated chemical due to all bonds being used.

If 842 grams of sodium hydroxide reacts with 750.0 grams of aluminum, how many grams of aluminum hydroxide should theoretically form?

Answers

548.55 grams of aluminum hydroxide should theoretically form.

Explanation:

Balanced equation for the reaction:

3 NaOH + Al ⇒ Al(OH)3 +3 Na

DATA GIVEN:

mass of NaOH = 842 grams, atomic mass =39.9 grams/mole

mass of Al = 750 grams, atomic mass = 26.9 grams/mole

aluminum hydroxide theoretical yield = ?

Moles of NaOH reacted

number of moles = (mass)/(atomic mass of 1 mole)

putting the values in the equation

NaOH = (842)/(39.9)

           = 21.1 MOLES OF NaOH

Al = (750)/(26.9)

   = 27.8 moles

from the equation

 from 3 moles of NaOH 1 mole of Al(OH)3 is produced

21.1 moles of NaOH will react to give x moles of Al(OH)3

(1)/(3) = (x)/(21.1)

7.03 moles of Al(OH)3 is formed.

and

1 mole of Al(OH)3 is formed from 1 mole of Al in the reaction

so, 27.8 Moles will react to give give 27.8 moles of Al(OH)3 limiting reagent of the given reaction is NaOH

mass of Al(OH)3 =7.03 x 78 (atomic mass of Al(OH)3)

          = 548.55 grams

theoretical  yield from the given data is 548.55 grams

Which formula represents an organic compound?( l) CaH2 (3) H2O2

(2) C4H8 (4) P2O5

Answers

Answer: The correct answer is Option 2.

Explanation:

Organic compounds are defined as those compounds in which a covalent bond is present between hydrogen and carbon atom. They are basically known as hydrocarbons. If any atom other than hydrogen and carbon is present, it is not considered as an organic compound.

From the given options:

Option 1:CaH_2

A, calcium atom is present, so it is not considered as an organic compound.

Option 2:C_4H_8

As., only carbon and hydrogen atom is only present, so it is considered as an organic compound.

Option 3:H_2O_2

As, oxygen atom is present, so it is not considered as an organic compound.

Option 4:P_2O_5

As, phosphorous and oxygen atoms are present, so it is not considered as an organic compound.

From the above information, the correct answer is Option 2.

The formula (2) C_4H_8 represents an organic compound.

What is an Organic compound

Organic compounds are compounds that primarily consist of carbon (C) and hydrogen (H), along with other elements such as oxygen, nitrogen, sulfur, and others. The formula C_4H_8 represents an organic compound that contains four carbon atoms (C₄) and eight hydrogen atoms (H₈).

These examples represent a small fraction of the vast array of organic compounds found in nature and synthesized in laboratories.

Hence we can say that option 2 is right. C_4H_8 represents an organic compound.

Read more on Organic compound here brainly.com/question/6279332

#SPJ6

Which do all groups of plants have these are the choices A.chloroplasts B.roots C.spores D.tubes

Answers

A.chloroplasts every plant needs it
Chloroplast, Needed to turn light into energy.

Is ability to conduct heat, physical or chemical?

Answers

the ability to conduct heat is physical because the object doesn't need to change its state in any way for this test to be taken
Physical because it does not need to change its state