Which is the best description of the scientific theory

Answers

Answer 1
Answer:

Explanation:

a scientific theory is a well substantiated explanation of some aspect of the nature world, based on a body of facts that have been repeatedly confirmed through observation and experiment. search fact-supported theories are not "guesses" but reliable account of the real world .


Related Questions

Why is there so much more carbon dioxide in the atmosphere of Venus than in that of Earth? Why so much more carbon dioxide than on Mars?
A 1 225.0 kg car traveling initially with a speed of 25.000 m/s in an easterly direction crashes into the back of a 9 700.0 kg truck moving in the same direction at 20.000 m/s. The velocity of the car right after the collision is 18.000 m/s to the east.(a) What is the velocity of the truck right after the collision? (Give your answer to five significant figures.) m/s east (b) What is the change in mechanical energy of the cartruck system in the collision? J (c) Account for this change in mechanical energy.
Impulse is the______of the force and time of contact
A tennis player hits a ball 2.0 m above the ground. The ball leaves his racquet with a speed of 20 m/s at an angle 5.0 ∘ above the horizontal. The horizontal distance to the net is 7.0 m, and the net is 1.0 m high. Does the ball clear the net?
A force of 40 N is applied in a direction perpendicular to the end of a 9 m long bar that pivots about its other end. Find the torque that this force produces about the pivot point. magnitude

Two bodies, one hot and the other cold kept in vacuum.what will happen to the tempreture of bodies after some time.

Answers

Hot body will lose heat from it, and that heat will goes out from it through radiation, so it's temperature will decrease after some time.

In same manner, cold body will take the heat, and it's temperature will increase

Hope this helps!

The speed of light is 3.00×108m/s. How long does it take for light to travel from Earth to the Moon and back again? Express your answer using two significant figures.

Answers

Answer:

v = 3×10^8 m/s

s= 384,400 km= 3.84×10^8 m/s

t = ?

v = s/t = 2s/t

t = 2s/v

t = (2×3.84×10^8) ÷ 3×10^8

t = 2.56 seconds

Explanation:

Earth's moon is the brightest object in our

night sky and the closest celestial body. Its

presence and proximity play a huge role in

making life possible here on Earth. The moon's gravitational pull stabilizes Earth's wobble on its axis, leading to a stable climate.

The moon's orbit around Earth is elliptical. At perigee — its closest approach — the moon comes as close as 225,623 miles (363,104 kilometers). At apogee — the farthest away it gets — the moon is 252,088 miles (405,696

km) from Earth. On average, the distance fromEarth to the moon is about 238,855 miles (384,400 km). According to NASA , "That means 30 Earth-sized planets could fit in between Earth and the moon."

The following three appliances are connected to a 120 volt house circuit: (i) a toaster, 1200 Watts, (ii) a coffee pot, 750 Watts, and (iii) a microwave, 600 Watt. If all operate at the same time, what total current would they draw

Answers

Answer:

They would draw a total of 21.25 amperes

Explanation:

The total power consumed is

1200 W+ 750 W + 600 W= 2550 Watts

The formula relating the power consumed, the voltage and the current is given as

P=IV---------------1

given that the voltage supply is 120V

2550=I*120\n\I=(2550)/(120) \n\nI= 21.25amps

Which of the following statement(s) istrue about clipper circuits
Select one:
O a. It converts a.c to d.c always
O b. The output is clipped of some
portion of input signal
O c. It converts d.c to a.c
O d. None of these​

Answers

Answer:

Explanation:

A rectifier is an electrical device that converts alternating current (AC) to direct current (DC), a process known as rectification. Rectifiers have many uses including as components of power supplies and as amplitude modulation detectors (envelope detectors) of radio signals. Rectifiers are most commonly made using solid state diodes but other type of components can be used when very high voltages or currents are involved. When only a single diode is used to rectify AC (by blocking the negative or positive portion of the waveform), the difference between the term diode and the term rectifier is simply one of usage. The term rectifier describes a diode that is being used to convert AC to DC. Most rectifier circuits contain a number of diodes in a specific arrangement to more efficiently convert AC power to DC power than is possible with only a single diode.

Which type of diffraction occurs when the point source and the screen are at finite distances from the obstacle forming the diffraction pattern?A. fraunhofer
B. fresnel
C. far-field
D. single slit

Answers

Fresnel diffraction

The spring constant, k, for a 22cm spring is 50N/m. A force is used to stretch the spring and when it is measured again it is 32cm long. Work out the size of this force

Answers

Answer:

5N

Explanation:

Given parameters:

Original length = 22cm

Spring constant, K  = 50N/m

New length = 32cm

Unknown

Force applied  = ?

Solution:

The force applied on a spring can be derived using the expression below;

   Force  = KE

 k is the spring constant

 E is the extension

  extension = new length - original length

  extension  = 32cm  - 22cm  = 10cm

convert the extension from cm to m;  

   100cm  = 1m;

    10cm will give 0.1m

So;

  Force  = 50N/m x 0.1m  = 5N

Final answer:

To calculate the force used to stretch the spring, Hooke's Law is utilized, which leads to the conclusion that a force of 5 N was exerted to stretch the spring from its original length of 22 cm to a final length of 32 cm.

Explanation:

The force exerted by a spring is governed by Hooke's Law, which states that the force required to stretch or compress a spring by a certain distance is proportional to that distance. In this case, the spring constant, k, is given as 50 N/m and the spring is stretched from its original length of 22 cm to a final length of 32 cm. This represents a stretch, or displacement, of 10 cm (or 0.1 m when converted to the standard unit).

The force (F) can be calculated using Hooke's law: F = kx, where x is the displacement of the spring. Substituting the given values, the force amounts to F = (50 N/m) * (0.1 m) = 5 N. Therefore, the force used to stretch the spring to its final length of 32 cm is 5 N.

Learn more about Hooke's Law here:

brainly.com/question/32317230

#SPJ11