COMPUTERS AND TECHNOLOGY COLLEGE

Subtract (100000)2 from (111)2 using 1s and 2s complement method of subtraction​

Answers

Answer 1
Answer:

Answer:

-11001

Explanation:

The following steps are performed in order to perform subtraction of the given binary numbers:

Step 1:

Find 2’s complement of the subtrahend. The subtrahend here is 100000

100000

First take 1's complement of 100000

1's complement is taken by inverting 100000

1's complement of 100000 = 011111

Now takes 2's complement by adding 1 to the result of 1's complement:

011111 + 1 = 100000

2's complement of 100000 = 100000

Step 2:

Add the 2's complement of the subtrahend to the minuend.

The number of bits in the minuend is less than that of subtrahend. Make the number of bits in the minuend equal to that of subtrahend by placing 0s in before minuend. So the minuend 111 becomes:

000111

Now add the 2's complement of 100000 to 000111

   0 0 0 1  1  1

+   1 0 0 0 0 0

    1 0 0 1  1  1

The result of the addition is :

 1 0 0 1  1  1

Step 3:

Since there is no carry over the next step is to take 2's complement of the sum and place negative sign with the result as the result is negative.

sum =   1 0 0 1  1  1

2's complement of sum:

First take 1's complement of 1 0 0 1  1  1

1's complement is taken by inverting 1 0 0 1  1  1

1's complement of 1 0 0 1  1  1 = 0 1 1 0 0 0

Now takes 2's complement by adding 1 to the result of 1's complement:

0 1 1 0 0 0 + 1 = 0 1 1 0 0 1

Now place the minus sign with the result of 2's complement:

- 0 1 1 0 0 1

Hence the subtraction of two binary numbers (100000)₂ and (111)₂  is

(-011001)₂

This can also be written as:

(-11001)₂

Related Questions

A friend asks you for help writing a computer program to calculate the square yards of carpet needed for a dorm room. The statement "the living room floor is rectangular" is an example of a(n) . The length and width of the room are examples of information, which you can obtain as from the user.
What is the second stage of information processing cycle​
What is the history of telecommunication​
Challenge: Tic-Tac-Toe (Report a problem) Detecting mouse clicks For this step of the challenge you will complete Tile's handleMouseClick method. The handleMouseClick method has two parameters: x and y which represent the coordinates of where the user clicked the mouse. When a user clicks inside a tile, that tile's handleMouseClick method should call that tile's onClick method. To check if the mouse click is inside of the tile, you will need an if statement that checks if: - the mouse click is on, or right of, the left edge of the tile - the mouse click is on, or left of, the right edge of the tile - the mouse click is on, or below, the upper edge of the tile - the mouse click is on, or above, the lower edge of the tile
Write a class named Episode. An instance of this episode class will represent a single episode of a TV show, with a title, a season number, and an episode number. For example "Friends, season 1, episode 1", or "The Wire, season 3, episode 5." Your class should have the following constructors and methods: A constructor that accepts three arguments: a String for the title, an int for the season number, and an int for the episode number. A constructor that accepts only a String, for the title, and sets the season and episode numbers to 1. A setter and getter for the title. (never mind the season and episode numbers.) A method named "equals", that accepts an Episode, and returns true if the title, season number and episode number are the same as the receiving object's. A method named "comesBefore". This method should also accept an Episode. It should return true if the episode that receives the invocation comes before the parameter. That is only true if the two objects have the same title, and if the argument comes from a later season, or the same season, but a later episode. Write only the class. Do not write a whole program

Which is an example of adaptive social behavior?

Answers

Birds help take care of each other's young to increase their chances of survival, and the behavior is passed on to offspring. 

Hope this helps!! :)

Answer:

D.

Explanation:

edge 2021

Which of the following is NOT a typical action of the catch block?Select one:
a. Throwing the exception
b. Completely handling the exception
c. Rethrowing the same exception for the calling environment
d. Partially processing of the exception

Answers

Answer:

A.

Explanation:

because its throwing the exception

Assume that two computers are directly connected by a very short link with a bandwidth of 125 Mbps. One computer sends a packet of 1000 Bytes to the other computer. What’s the end-to-end delay (ignoring the propagation delay)?

Answers

Answer:

End to End Delay = 64 micro second

Explanation:

Given

Bandwidth = 125Mbps

A packet = 1000 bytes

Converting bandwidth from Mbps to bit/s

Bandwidth = 125* 10^6 bits/s

Bandwidth = 125,000,000 bit/s

End to End delay is calculated as

Length of Packet ÷ Bandwidth

Length of Packet = 1,000 byte --- convert to bits

Length of Packet = 1000 * 8

Length of Packet = 8,000 bits

So, End to End delay = 8,000/125,000,000

End to End Delay = 0.0000064 seconds --- convert to micro second

End to End Delay = 64 micro second

You need to design online to form in which users have to type their name and password to log into an application. The password can be acombination of numbers and letters. Which data type is most suitable for a password field?
The
data type is most suitable to define a password field.

Answers

Answer:

Data Type String

Explanation:

Hope it helps. pls mark as brainliest.

(Display nonduplicate words in ascending order)Write a program that prompts the user to enter a text in one line and displays all the nonduplicate words in ascending order.
Sample Run
Enter a text: Good morning Good afternoon Good evening
Good afternoon evening morning

Answers

The programreturns uniqueelements in the string passed in with no duplicates. The programis written in python 3 thus :

text = input('Enter text : ')

#promptsuserto enterstring inputs

split_text = text.split()

#splitinputtedtext basedonwhitespace

unique = set(split_text)

#usingtheset function,takeonlyuniqueelementsin thestring

combine = ' '.join(unique)

#usethejoinfunctiontocombinethestringstoformasingle lengthstring.

print(combine)

Asamplerunoftheprogramisattached

Learn more : brainly.com/question/15086326

Answer:

The program to this question as follows:

Program:  

value = input("Input text value: ") #defining variable value and input value by user

word = value.split() #defining variable word that split value

sort_word = sorted(word) #defining variable using sorted function

unique_word = [] #defining list

for word in sort_word: #loop for matching same value

   if word not in unique_word: #checking value

       unique_word.append(word) #arrange value using append function

print(' '.join(unique_word)) #print value

Output:

Input text value: Good morning Good afternoon Good evening

Good afternoon evening morning  

Explanation:

In the above python code, a value variable is defined that uses input function to input value from the user end, and the word variable is declared, which uses the split method, which split all string values and defines the sort_word method that sorted value in ascending order.

  • Then an empty list "unique_word" is defined, which uses the for loop and inside the loop, a conditional statement is used.
  • In if block, it matches all value is unique if this is condition is true it will arrange all values and uses the print function to print all value.  

What component can be used for user input or display of output?JButton
JLabel
JTextField
JFrame

Answers

Answer:

JTextField

Explanation:

JTextField is a Swing control which can be used for user input or display of output. It corresponds to a textfield and can be included with other controls such as JLabel, JButton,JList etc. on a comprehensive user interface which is application dependent. JTextField supports a read-write mode where the user can enter a value and it also supports a read-only mode which can be used to display non-editable output to the user.
Other Questions
A common measure of transmission for digital data is the number of bits transmitted per second. Generally, transmission is accomplished in packets consisting of a start bit, a byte (8 bits) of information, and a stop bit. Using these facts, answer the following:a. Compute the time required to transmit an image of 1200x800 pixels with 8 bits for gray of each pixel using a 50 M bits/sec. modem?b.What would the time be at 3 M bits/sec, a representative of download speed of a DSL connection?(c) Repeat a and b when the image is RGB colored with 8 bits for each primary color. f 20 colored frames per second
Write a program which increments from 0 to 20 and display results in Decimal on the console 2-b) Modify above program to increment from 0 to 20 and display results in Binary on the console
Debugging is not testing, but always occurs as a consequence of testing. A) TRUEB) FALSE
You wrote a list of steps the user will take to perform a task. Which statement is true about this step?You have drawn pictures of what your screens will look like and identified the input-process-output that occurs on eachscreen.O Your app is functioning and ready to test.O You have defined a use case.O In this step, you defined your target audience and main goal.