It is possible to force the Hardware Simulator to load a built-in version of chip Xxx. This can be done by:

Answers

Answer 1
Answer:

Answer:

The answer is "It Specifies the built-in chip in the module header".

Explanation:

The hardware simulator is also an instrument about which the device physical models could be constructed, in the mainframe, which includes a console, a power supply, or multiple sockets for plugging regular modules.

  • It plays a specific role in the computing system, and it is also essential for each standard module.
  • In the hardware controller, it can be used to launch an integrated Xxx processor version, which can be achieved by listing the built-in chip throughout the module header.

Related Questions

When do you need to apply for program completion andreview?a. 1-2 semesters before program completionb. one month before program completionc. a couple of weeks before program completiond.Never, you don’t need to complete any paperwork to prepare for program completion
Given the IPv4 address, 200.245.10.150/28, how many subnets are possible and how many hosts can be supported by each subnet?a. 228 = 268 subnets, 24 -2 = 14 hosts per subnetwork b. 24 = 16 subnets, 228 - 2 = 268E6 hosts per subnetwork c. 24 - 2 = 14 subnets, 24 = 16 hosts per subnetwork d. 24 = 16 subnets, 24 - 2 = 14 hosts per subnetwork
I need help please?!!!
You have been asked to write a two-page report that explains the extent to which the IT department can configure the cryptographic features of Word 2010. What is the process involved in configuring encryption?
the UDP server described needed only one socket, whereas the TCP server needed two sockets. Why? If the TCP server were to support n simultaneous connections, each from a different client host, how many sockets would the TCP server need?

Explain how signal detection theory can be used to analyze web site reading and searching. Based on this analysis, provide three suggestions for your favorite search engine or web site that includes search.

Answers

Answer:

Human visual behavior often includes searching, scanning, and monitoring.

While it should be possible to moderate the performance of these tasks based on the dimensions used in the table, it is often useful to analyze these situations using Signal Detection Theory (SDT).              

 

Three suggestions for my favourite search engine that includes search are:

1.  ensure that search results are graded according to the following categories using different colours:  

  • Most accurate and relevant results;
  • Accurate and slightly relevant results
  • Fairly accurate and fairly relevant results

These can help the users identify more easily the results to spend more time on. This categorisation can be done using colours. This is because of the way the eye functions. Unlike a camera snapshot, for example, the eye does not capture everything in a scene equally, but selectively picks out salient objects and features from the current context, and focuses on them so they can be processed in more detail.

2.  Another suggestion is that attention needs to be paid to where people look most of the time. It is not out of place for people to instinctively avoid search results that have dollar signs or currency signs especially when they are not searching for a commercial item.  

3. Lastly in displaying results that have images, it best to use sharp images. The theory suggests with respect to contrast, clarity and brightness that sharper and more distinct objects appear to be nearer, and duller objects appear to be farther away. To elicit the interest of the reader, targeted results or information from search engines must make use of the factors of contrast, clarity and brightness.

Cheers!

   

When you move or size a control in the Form Designer, Visual Studio automatically adjusts the ________________ that specify the location and size of the control.

Answers

Answer:

When you move or size a control in the Form Designer, Visual Studio automatically adjusts the properties that specify the location and size of the control.

How does an Index Organized table differ from a standard table and a typical index?

Answers

The thing is that an Index organized table, also known as IOT, is a type of table that stores data in a B tree index structure, which is used by Oracle. Normal relational tables, called heap-organized tables, store rows in any order and  primary key indexes store only the columns included in its definition.

What is the largest safety threat to the ISS?
Will give brainlest :)

Answers

Answer:

The largest safety threat to the ISS are the micrometeorite and orbital debris (MMOD) fires, impacts and toxic spills. These pose the biggest threat to the ISS astronauts.

Explanation:

The debris is as a result of collisions. An observation revealed that once a certain mass is passed, collisions give rise to more debris.

Another report revealed that the station has about 55% chance of being hit by tiny space rocks over a 10-year period. They can protected by installing new impact-protecting panels to the exterior of the station.

ISS means International Satellite Station.

_________ help(s) prevent a person from being a single point of failure.

Answers

Answer:

Internet access

Explanation:

Answer:

The correct word for the blank space is: Access controls.

Explanation:

Access controls regulate who has access to sensitive information in a company. Access controls can be physical -grant access to data centers, restricted rooms or buildings- and virtual -grant access to servers, networks or certain types of files or data.

Which of the following function declarations correctly expect an array as the first argument?Question 1 options:

void f1(int array, int size);

void f1(int& array, int size);

void f1(int array[100], int size);

void f1(float array[], int size);

All of the above

C and D

A and B

Answers

Answer:

Only

Option: void f1(float array[], int size);

is valid.

Explanation:

To pass an array as argument in a function, the syntax should be as follows:

functionName (type arrayName[ ] )

We can't place the size of the array inside the array bracket (arrayName[100]) as this will give a syntax error. The empty bracket [] is required to tell the program that the value that passed as the argument is an array and differentiate it from other type of value.