Write quickly without over thinking is the most important thing to remember when writing a draft.
Thus, the correct option is B.
An initial version of a piece of writing or written document that is frequently reviewed before verification is referred to as a "draft."
A written order of payment from one party (the drawer) to another (the drawee) instructing them to pay a specific amount to a third party (the payee) on or before a specific date is an example.
You can rethink and rewrite your thoughts after you draft them by putting them on paper. You will be able to determine where further information and supporting proof are needed by doing this.
It will also help you determine whether the concepts you are providing appear logical and whether your argument is clear.
The full paper will be sent along with the final draft. Your writing ought to appear polished by the time you complete the final draft. Grammar and spelling mistakes, fragmented sentences, weak or nonexistent paragraph transitions, and other first draft flaws should all be eliminated.
Learn more about draft, here
#SPJ2
Answer:
B. Write quickly without over thinking
Explanation:
(APEX)
just took the quiz
1 $15,750 $26,250 $35,000
2 15,750 21,000 21,000
3 15,750 15,750 12,600
4 15,750 10,500 7,560
5 15,750 5,250 2,590
Total $78,750 $78,750 $78,750
Required:
a. What is the cost of the asset being depreciated?
b. What amount, if any, was used in the depreciation calculations for the salvage value for this asset?
c. Which method will produce the highest charge to income in Year 1?
d. Which method will produce the highest charge to income in Year 4?
e. Which method will produce the highest book value for the asset at the end of Year 3?
f. If the asset is sold at the end of Year 3, which method would yield the highest gain (or lowest loss) on disposal of the asset?
Answer:
a. What is the cost of the asset being depreciated?
the cost of the asset = $35,000 / 0.4 = $87,500
b. What amount, if any, was used in the depreciation calculations for the salvage value for this asset?
salvage value = $87,500 - (5 x $15,750) = $8,750
c. Which method will produce the highest charge to income in Year 1?
double declining results in the highest depreciation expense
d. Which method will produce the highest charge to income in Year 4?
straight line results in the highest depreciation expense
e. Which method will produce the highest book value for the asset at the end of Year 3?
straight line, book value = $87,500 - (3 x $15,750) = $40,250
f. If the asset is sold at the end of Year 3, which method would yield the highest gain (or lowest loss) on disposal of the asset?
double declining balance, since the carrying value is lowest = $87,500 - $35,000 - $21,000 - $12,600 = $18,900
e.g. if the assets is sold at $30,000, the gain = $11,100
under straight line method a $30,000 resale price would result in a loss(= $30,000 - $40,250 = -$10,250), while sum of years' digit would result in a gain = $30,000 - ($87,500 - $26,250 - $21,000 - $15,750) = $5,500
Answer:
$202,500
Explanation:
Working capital is the difference between current assets and current liabilities. Therefore, the formula for calculating working capital is as below.
Working capital = current assets- current liabilities
in this case
current assets =
cash $200,000
account receivable $75,000
prepaid expenses of $12,500,
Total current assets = $287,500
current liabilities
accounts payable of $50,000
other current liabilities of $35,000
Total current liabilities = $85,000
working capital = $287,500 - $85,000
=$202,500
Answer:
D. It will increase by 667 units.
Explanation:
The calculation of break-even point is shown below:-
Contribution Per Unit (before increase in Variable Cost) = Unit sale price - Unit Variable Cost
= $55 - $30
= $25
Break-Even (Units) = Fixed Cost ÷ Division Contribution per unit
= $25,000 ÷ $25
= 1,000
New Variable Cost per unit = $30 + $10 (Increase in Direct material cost) = $40
Selling Price = $55
New Contribution per unit = $55 - $40 = $15
New Break-Even (Units) = Fixed Cost ÷ New Contribution per unit
= $25,000 ÷ $15
= 1,667
Increase in Break-Even Units(after increase in D.M cost) = New Break even point - Old Break even point
= 1,667 - 1,000 units
= 667 units
Therefore, The Break even points units will increase by 667 units, if the D.M cost increases by $10 per unit.
Assets 2016
Cash and securities $2,145
Accounts receivable 8,970
Inventories 12,480
Total current assets $23,595
Net plant and equipment $15,405
Total assets $39,000
Liabilities and Equity Accounts payable $7,410
Accruals 4,290
Notes payable 5,460
Total current liabilities $17,160
Long-term bonds $7,800
Total liabilities $24,960
Common stock $5,460
Retained earnings 8,580
Total common equity $14,040
Total liabilities and equity $39,000
Income Statement (Millions of $) 2016
Net sales $58,500
Operating costs except depreciation 54,698
Depreciation 1,024
Earnings before interest and taxes (EBIT) $2,779
Less interest 829
Earnings before taxes (EBT) $1,950
Taxes 683
Net income $1,268
Other data: Shares outstanding (millions) 500.00
Common dividends (millions of $) $443.63
Int rate on notes payable & L-T bonds 6.25%Federal plus state income tax rate 35%Year-end stock price $23.77A. What is the firm's current ratio?B. What is the firm's quick ratio?C. What is the firm's days sales outstanding? Assume a 365-day year for this calculation.D. What is the firm's total assets turnover?E. What is the firm's inventory turnover ratio?F. What is the firm's TIE?G. What is the firm's debt/assets ratio?H. What is the firm's ROA?I. What is the firm's ROE?
Answer:
A. 1.375
B. 0.648
C. 77.87 days
D. 1.5 times
E. 4.69 times
F. 3.35 times
G. 34 %
H. 4.63 %
I. 23.22%
Explanation:
A. What is the firm's current ratio
current ratio = current assets / current liabilities
= $23,595 / $17,160
= 1.375
B. What is the firm's quick ratio
quick ratio = (current assets - inventory) / current liabilities
= ($23,595 - $12,480) / $17,160
= 0.648
C. What is the firm's days sales outstanding Assume a 365-day year for this calculation.
days sales outstanding = Inventory / (Sales / 365)
= $12,480 / ($58,500 /365)
= 77.87 days
D. What is the firm's total assets turnover
total assets turnover = Sales / Total Assets
= $58,500 / $39,000
= 1.5 times
E. What is the firm's inventory turnover ratio?
inventory turnover ratio = Sales / Inventory
= $58,500 / $12,480
= 4.69 times
F. What is the firm's TIE?
Total Interest Expense (TIE) = Earnings before interest and taxes (EBIT) / Total Interest Expense
= $2,779 / $829
= 3.35 times
G. What is the firm's debt/assets ratio?
debt/assets ratio = Total Debt / Total Assets × 100
= ($5,460 + $ $7,800) / $39,000 × 100
= 34 %
H. What is the firm's ROA?
Return on Assets (ROA) = Earnings Before Interest After Tax (EBIAT) / Total Assets × 100
= ($1,268 + ($829 × 65%)) / $39,000 × 100
= 4.63 %
I. What is the firm's ROE?
Return on Equity (ROE) = Net Income / Total Shareholders Funds
= $1,268 / $5,460 × 100
= 23.22%
The current ratio is 1.37, the quick ratio is 0.65, and the days sales outstanding is 56.15.
A. The current ratio is calculated by dividing total current assets by total current liabilities:
Current Ratio = Total Current Assets / Total Current Liabilities
Current Ratio = $23,595 / $17,160
Current Ratio = 1.37
B. The quick ratio, also known as the acid-test ratio, is calculated by dividing quick assets by total current liabilities:
Quick Ratio = (Cash and Securities + Accounts Receivable) / Total Current Liabilities
Quick Ratio = ($2,145 + $8,970) / $17,160
Quick Ratio = 0.65
C. The days sales outstanding measures how long it takes for a company to collect its accounts receivable:
Days Sales Outstanding = Accounts Receivable / (Net Sales / 365)
Days Sales Outstanding = $8,970 / ($58,500 / 365)
Days Sales Outstanding = 56.15
#SPJ3
Answer:
The cost of goods manufactured is $ 76,800
Explanation:
Computation of cost of goods manufactured
Raw Materials consumed
Opening raw materials inventory $ 1,200
Add: Raw materials purchased $ 27,800
Less: Closing raw materials inventory $ ( 1,400)
Raw materials consumed $ 27,600
Direct labor Cost $ 20,000
Manufacturing Overhead $ 28,900
Total manufacturing input $ 76,500
Add: Opening work in process $ 7,100
Less: Ending work in process $( 6,800)
Cost of goods manufactured $ 76,800
Answer:
The airline company is considering buying the aircraft components in house or outsourcing it from other foreign countries.
Explanation:
A company can outsource the product manufacturing or can manufacture its own products. The manufacturing of a product in house will be according to the requirements and customization can be done but on the other hand it will require equipment and manufacturing line setup on the site which incurs heavy cost. Buying product from outside will save incurring heavy fixed costs.