1. Draw a quantitative motion map for the following description: A bicyclist speeds along a road at 10 m/s for 6 seconds. Then she stops for three seconds to make a 180˚ turn and then travels at 5 m/s for 3 seconds.

Answers

Answer 1
Answer:

Answer:

Please find the attached file for the figure.

Explanation:

Given that a bicyclist speeds along a road at 10 m/s for 6 seconds.

Its acceleration = 10/6 = 1.667 m/s^2

The distance covered = 1/2 × 10 × 6

Distance covered = 30 m

That is, displacement = 30 m

Then she stops for three seconds to make a 180˚ turn and then travels at 5 m/s for 3 seconds.

The acceleration = 5/3 = 1.667 m/s^2

The displacement = 1/2 × 5 × 3

Displacement = 7.5 m

The resultant acceleration will be equal to zero.

While the resultant displacement will be:

Displacement = 30 - 7.5 = 22.5 m

Please find the attached file for the sketch.


Related Questions

In constructing a moral argument, the point is toA. come to a conclusion that leads to reasonable action consistent with moral values.B. clarify your own stage of moral reasoning.C. identify more prescriptive than descriptive premises.D. make certain you are being guided by good intentions and a clear conscience.
Draw a ray diagram for an object placed more than two focal lengths in front of a converging lens.
An athlete can exercise by making mechanical waves in ropes. What is themedium of these waves?A. EnergyB. The ropeC. The athleteD. Air
Beginning 156 miles directly east of the city of Uniontown, a truck travels due south. If the truck is travelling at a speed of 31 miles per hour, determine the rate of change of the distance between Uniontown and the truck when the truck has been travelling for 81 miles. (Do not include units in your answer, and round to the nearest tenth.)
How far above the bottom of the tank could a second hole be cut so that the stream emerging from it could have the same range as for the first hole

Which of the following describes the net force acting on an object?The sum of all forces acting on an object
The gravitational force minus any contact forces acting on an object
The difference between the normal force and the gravitational force acting on an object
The sum of all the forces acting on an object in the same direction

Answers

The sum of all forces acting on an object in the same direction is described for the net force acting on an object.

What is a Net force?

  • When the forces are acting in the same direction of movement of the object it can be said as sum of the two individual forces will be equal to the "Net Force" .
  • The net force is the combined force of all individual forces acting on an object.
  • If the object with the forces in the opposite direction, then the net force will not be equal to the sum of the forces.

Example : If two forces (2 kids pushing in the same direction to move the object big box) act on an object (big box) in the same direction, then the net force is equal to the sum of the two forces. If the kids pushed in the opposite direction, the net force will not occur.

Hence, Option D is the correct answer.

Learn more about Net force,

brainly.com/question/6000441

#SPJ6

Answer:

The sum of all the forces acting on an object in the same direction.

Look at the Kunoichi's of Naruto but as a Gang. Who do you think looks the baddest out of the group(but in a good way)?

My opinion is Hinata...just saying

Answers

Answer:

hinata for sure

Explanation:

seems reasonable

We know that there is a relationship between work and mechanical energy change. Whenever work is done upon an object by an external force (or non-conservative force), there will be a change in the total mechanical energy of the object. If only internal forces are doing work then there is no change in the total amount of mechanical energy. The total mechanical energy is said to be conserved. Think of a real-life situation where we make use of this conservation of mechanical energy (where we can neglect external forces for the most part). Describe your example and speak to both the kinetic and potential energy of the motion.

Answers

Answer:

* roller skates and ice skates.

* roller coaster

Explanation:

One of the best examples for this situation is when we are skating, in the initial part we must create work with a force, it compensates to move, after this the external force stops working and we continue movements with kinetic energy, if there are some ramps, we can going up, where the kinetic energy is transformed into potential energy and when going down again it is transformed into kinetic energy. This is true for both roller skates and ice skates.

Another example is the roller coaster, in this case the motor creates work to increase the energy of the car by raising it, when it reaches the top the motor is disconnected, and all the movement is carried out with changes in kinetic and potential energy. In the upper part the energy is almost all potential, it only has the kinetic energy necessary to continue the movement and in the lower part it is all kinetic; At the end of the tour, the brakes are applied that bring about the non-conservative forces that decrease the mechanical energy, transforming it into heat.

A 0.320 kg ball approaches a bat horizontally with a speed of 14.0 m/s and after getting hit by the bat, the ball moves in the opposite direction with a speed of 22 m/s. If the ball is in contact with the bat for 0.0600 s, determine the magnitude of the average force exerted on the bat.

Answers

Answer:

42.67N

Explanation:

Step one:

Given

mass m= 0.32kg

intital velocity, u= 14m/s

final velocity v= 22m/s

time= 0.06s

Step two:

Required

Force F

the expression for the force is

F=mΔv/t

F=0.32*(22-14)/0.06

F=(0.32*8)/0.06

F=2.56/0.06

F=42.67N

The average force exerted on the bat 42.67N

A 90 kg painter is standing on a horizontal wooden scaffolding of length 10 m, which is supported on each end by a rope. The painter is standing 2 m from the first rope and 8 m from the second rope. What is the tension in the first rope (in Newtons)

Answers

Explanation:

For equilibrium, \sum M = 0.

So,   8 m * mg - (10 m) T_(1) = 0

             T_(1) = (8 * mg)/(10)

                        = (8 * 90 * 9.8)/(10)

                        = 705.6 N

Also, for equilibrium \sum F_(y) = 0

              T_(1) + T_(2) - mg = 0

or,         T_(2) = mg - T_(1)

                        = 90 * 9.8 - 705.6

                        = 176.4 N

Thus, we can conclude that the tension in the first rope is 176.4 N.

Which lists mixtures, in order, from the smallest particles to the largest particles?O solution, colloid, suspension
solution, suspension, colloid
O suspension, colloid, solution
O suspension, solution, colloid

Answers

The order of mixtures according to their particle size from smallest to the largest is: solution< colloid< suspension. So, the first option is correct.

What is meant by solvent and solute in a mixture ?

Solvent is defined as the substance in which the solute particles dissolve and forms a mixture. Solute is defined as the particles that get dissolved in the solvent to form the mixture.

Here,

The particles of the solutions, colloids and suspension varies according to their size and the type of mixture they comes under.

Colloid is a heterogenous mixture, that means it has a non-uniform composition of particles. In colloid, the particles have an intermediate size between 1 nm to 1000 nm which is the size range between that of solution and suspension.

Solution is a homogenous mixture in which the particles have a diameter of less than 1 nm. The size of the particles in solution is the smallest when compared to that of colloid and suspension.

Suspension is a homogenous mixture in which the size of the particles is larger than 10000 nm. The particles of suspension are the largest among the particles of colloid and solution.

Hence,

The order of mixtures according to their particle size from smallest to the largest is: solution< colloid< suspension.

To learn more about solute and solvent, click:

brainly.com/question/7932885

#SPJ7

Answer:

A or 1

Explanation:

solution, colloid, suspension