As frequency increases in an electromagnetic wave, its photon energy decreases. A. True B. False

Answers

Answer 1
Answer:

Answer:

False

Explanation:

Answer 2
Answer:

Answer:

False

Explanation:

A P E X


Related Questions

Water, initially saturated vapor at 4 bar, fills a closed, rigid container. The water is heated until its temperature is 360°C. For the water, determine the heat transfer, in kJ per kg of water. Kinetic and potential energy effects can be ignored.
You release a block from the top of a long, slippery inclined plane of length l that makes an angle θ with the horizontal. The magnitude of the block's acceleration is gsin(θ).1. For an x axis pointing down the incline and having its origin at the release position, derive an expression for the potential energy of the block-Earth system as a function of x. Suppose that the gravitational potential energy is measured relative to the ground at the bottom of the incline, UG(x=l)=0.Express your answer in terms of g and the variables m, l, x, and θ.(U^G=?)2. Use the expression you derived in the previous part to determine the speed of the block at the bottom of the incline. (Vx,f=?)Express your answer in terms of g and the variables m, l, and θ.
What is the density, in Mg/m3, of a substance with a density of 0.14 lb/in3? (3 pts) What is the velocity, in m/sec, of a vehicle traveling 70 mi/hr?
On a map each inch represents 25 miles what is the length of a highway if it is 6 inches long on a map
An ideal gas is at a temperature of 320 K. What is the average translational kinetic energy of one of its molecules

Find the speed of light in carbon tetrachlorideethyl alcohol. The refraction index is 1.461 using 3 x 10^8 m/s as the speed of light in vacuum. Answer in units of m/s.

Answers

Answer:

2.05 x 10^8 m /s

Explanation:

c = 3 x 10^8 m/s

μ = c / v

where, μ is the refractive index, c be the velocity of light in air and v be the velocity of light in the medium.

μ = 1.461

1.461 = 3 x 10^8 / v

v = 3 x 10^8 / 1.461

v = 2.05 x 10^8 m /s

A spring-loaded gun, fired vertically, shoots a marble 9.0 m straight up in the air. What is the marble's range if it is fired horizontally from 1.8 m above the ground?

Answers

Final answer:

The range of the marble when fired horizontally from 1.8m above the ground can be calculated using the equations of motion in physics. First, the time of flight is found using the vertical motion and then the range is calculated using the time of flight and the initial velocity determined from the vertical launch. The marble's range is approximately 8.4m.

Explanation:

To solve this problem, we need to make use of the concept of projectile motion in physics. The most crucial part in solving this type of problem is to break the motion into its horizontal and vertical components.

First, we find the time the projectile is in the air using the vertical motion. Ignoring air resistance, the time a projectile is in the air is determined by the initial vertical velocity and the height from which it drops. Here, the height is given as 1.8m and we can use the equation h = 0.5gt^2, where h is the height, g is the acceleration due to gravity (9.8 m/s^2), and t is the time. After calculating, we find that the time the marble is in the air is about 0.6 seconds.

Now, we can use the time to find the horizontal distance traveled by the marble, a.k.a the range. The range is given by R = vt, where v is the horizontal velocity, which is the same as the initial vertical velocity. From the problem, we know the marble reached a height of 9.0m when shot vertically, which we can use to find the initial velocity using the equation v = sqrt(2gh), where g is the acceleration due to gravity (9.8 m/s^2) and h is the height. We find that the initial velocity is about 14 m/s.

So, the range R = vt = 14m/s * 0.6s = 8.4m. Therefore, the marble's range when fired horizontally from 1.8m above the ground is approximately 8.4m.

Learn more about Projectile Motion here:

brainly.com/question/29545516

#SPJ3

As you are leaving a building, the door opens outward. If the hinges on the door are on your right, what is the direction of the angular velocity of the door as you open it?a. up to the ceiling/sky.
b. down to the floor/ground.
c. to your left.
d. to your right.

Answers

Answer:

b. down to the floor/ground

Explanation:

The direction of the angular velocity can be easily found by the use  of right hand rule. This rule states that when we curl the fingers of right hand in the direction of the rotation of the object, the direction of the thumb gives the direction of angular velocity. We apply this rule to our situation. Since, the door opens outward and the hinges are on right, it means that the rotation of door is clockwise. So, when we curl the fingers of right hand in clock wise direction, the thumb will point in downward direction. So, the direction of angular velocity will be down to the floor/ground.

The correct option is:

b. down to the floor/ground

Suppose a boat moves at 16.4 m/s relative to the water. If the boat is in a river with the current directed east at 2.70 m/s, what is the boat's speed relative to the ground when it is heading east, with the current, and west, against the current? (Enter your answers in m/s.)

Answers

Answer:

with the current: 19.1 m/s eastern

against the current: 13.7 m/s western

Explanation:

The boat speed relative to ground is the sum of the boat speed relative to water + the water speed relative to ground.

Suppose eastern is positive, water speed due east is 2.7m/s.

When the boat is heading east, its speed relative to water is 16.4m/s, its speed relative to ground is 16.4 + 2.7 = 19.1 m/s eastern

When the boat is heading west, its speed relative to water is -16.4m/s, its speed relative to ground is -16.4 + 2.7 = -13.7 m/s western

Which type of diffraction occurs when the point source and the screen are at finite distances from the obstacle forming the diffraction pattern?A. fraunhofer
B. fresnel
C. far-field
D. single slit

Answers

Fresnel diffraction

A pendulum built from a steel sphere with radius r cm 5 and density stl kg m S 3 7800 is attached to an aluminum bar with length l m 1 thickness t cm 0 8. and width w cm 4 and density . al kg m S 3 2820 a. Calculate the mass moment of inertia of the pendulum about its center of mass, . cm I b. Calculate the mass moment of inertia of the pendulum about its pivot point, o

Answers

Answer:

1)   I_ pendulum = 2.3159 kg m², 2)  I_pendulum = 24.683 kg m²

Explanation:

In this exercise we are asked to calculate the moment of inertia of a physical pendulum, let's start by calculating the center of mass of each elements of the pendulum and then the center of mass of the pendulum

Sphere

They indicate the density of the sphere roh = 37800 kg / m³ and its radius

r = 5 cm = 0.05 m

we use the definition of density

               ρ = M / V

               M = ρ V

the volume of a sphere is

                V = 4/3 π r³

we substitute

              M = ρ 4/3 π r³

           

we calculate

              M = 37800  4/3 π 0.05³

              M = 19,792 kg

Bar

the density is ρ = 32800 kg / m³ and its dimensions are 1 m,

0.8 cm = 0.0008 m and 4cm = 0.04 m

The volume of the bar is

               V = l w h

              m = ρ l w h

we calculate

              m = 32800 (1   0.008   0.04)

              m = 10.496 kg

Now we can calculate the center of mass of the pendulum, we use that the center of mass of the sphere is its geometric center, that is, its center and the center of mass of the bar is where the diagonals intersect, in this case it is a very bar. long and narrow, whereby the center of mass is about half the length. It's mass scepter of the pendulum is

               r_cm = 1 / M (M r_sphere + m r_bar)

               M = 19,792 + 10,496 = 30,288 kg

               r_cm = 1 / 30,288 (10,496 0.5 + 19.792 (1 + 0.05))

               r_cm = 1 / 30,288 (5,248 + 20,7816)

               r_cm = 0.859 m

This is the center of mass of the pendulum.

1) Now we can calculate the moment of inertia with respect to this center of mass, for this we can use the theorem of parallel axes and that the moments of inertia of the bodies are:

Sphere I = 2/5 M r2

Bar I = 1/12 m L2

parallel axes theorem

                  I = I_cm + m D²

where m is the mass of the body and D is the distance from the body to the axis of rotation

Sphere

      m = 19,792 ka

the distance D is

                D = 1.05 -0.85

                D = 0.2 m

we calculate

               I_sphere = 2/5 19.792 0.05 2 + 19.792 0.2 2 = 0.019792 +0.79168

               I_sphere = 0.811472 kg m²

Bar

m = 10.496 kg

distance D

             D = 0.85 - 0.5

             D = 0.35 m

              I_bar = 1/12 10.496 0.5 2 + 10.496 0.35 2 = 0.2186 + 1.28576

              I_bar = 1.5044 kg m²

The moment of inertia is a scalar quantity whereby the moment of inertia of the body is the sum of the moment of the parts

              I_pendulum = I_sphere + I_bar

              I_pendulum = 0.811472 +1.5044

              I_ pendulum = 2.3159 kg m²

this is the moment of inertia of the pendulum with respect to its center of mass located at r = 0.85 m

2) The moment is requested with respect to the pivot point at r = 0 m

Sphere

        D = 1.05 m

         I_sphere = 2/5 M r2 + M D2

        I_sphere = 2/5 19.792 0.05 2 + 19.792 1.05 2 = 0.019792 +21.82

        I_sphere = 21.84 kg m²

Bar

         

D = 0.5 m

      I_bar = 1/12 10.496 0.5 2 + 10.496 0.5 2 = 0.21866 + 2.624

      I_bar = 2,84266 kg m 2

The pendulum moment of inertia is

       I_pendulum = 21.84 +2.843

       I_pendulum = 24.683 kg m²

This moment of inertia is about the turning point at r = 0 m