What is the mass of 8.12 × 1023 molecules of CO2 gas? (Atomic mass of carbon = 12.011 u; oxygen = 15.999 u.)

Answers

Answer 1
Answer:

Answer:

8306.76

Explanation:

you just calcuate 8.12 x 1023 and that will give you the answer

PLZ mark me as a BRAINLIEST


Related Questions

All fossil fuels contain this element. iron hydrogen copper magnesium
a molecule of a compound contains a total of 10 hydrogen atoms and has the general formula CnH2n+2 which prefix is used in the name of this compound?
A chemical reaction in which compounds break up into simpler constituents is a _______ reaction.a. combinationb. decompositionc. double replacementd. substitution
Ozone is dangerous to human health only when it is found in the what?
How many grams of calcium bromide are in 50.0 mL of a 0.25 M calcium bromide solution?

D Serum Levels Of 4 Mcg/mL, Calculate The Dose, In Milligrams, For A 120-lb Patient That May Be Expected To Result In A Blood Serum Gentamicin Level Of 4.5 Mcg/mL. This problem has been solved! See the answer If the administration of gentamicin at a dose of 1.75 mg/kg is determined to result in peak blood serum levels of 4 mcg/mL, calculate the dose, in milligrams, for a 120-lb patient that may be expected to result in a blood serum gentamicin level of 4.5 mcg/mL.

Answers

Answer:

The patient requires a dose of 107.2 mg of gentamicin

Explanation:

A dosage of 1.75 mg per Kilogram body weight results in blood serum levels of 4.5 mcg/mL

This means that; 1.75 mg/ kg = 4.0 mcg/mL

Therefore, dosage of gentamicin in  mg/kg that will result in 4.5 mcg/mL blood serum level = (1.75 mg/Kg * 4.5 mcg/mL) / 4.0 mcg/mL

Dosageof gentamicin = 1.97 mg/Kg

1-lb = 0.453592 Kg

Weight of 120-lb patient in Kg = 120 * 0.453592 = 54.43 Kg

Dose in mg required by patient = 1.97 mg/Kg * 54.43 Kg = 107.2 mg

Therefore, the 120-lb patient requires a dose of 107.2 mg of gentamicin to result in a blood serum level of 4.5 mcg/mL

An aqueous solution of lithium hydroxide contains hydroxide ions as the only negative ion in the solution. Lithium hydroxide is classified as an

Answers

An Arrhenius acid refers to a component, which dissociates in water to produce hydrogen ions, or it can also be stated as that the acid enhances the concentration of hydrogen ions in an aqueous solution. On the other hand, an Arrhenius base refers to a component, which gets dissociate in water to produce hydroxide ions, or it can be said that a base enhances the concentration of hydroxide ions in an aqueous solution.  

Therefore, an aqueous solution of lithium hydroxide comprising hydroxide ions as the sole negative ion in the solution is classified as an Arrhenius base.

Answer is an Arrhenius Base.

How is the size of the mineral grains affected by the rate at which molten rock material cools?

Answers

The rate at which molten rock material cools affects the size of the mineral grains. The longer it cools, the larger the crystals become.

What is mineral?

  • A mineral is a naturally occurring substance that has distinct chemical and physical properties, composition, and atomic structure.
  • An economic mineral is a broader term that includes minerals, metals, rocks, and hydrocarbons (solid and liquid) extracted from the earth through mining, quarrying, and pumping.
  • A mineral exists as inorganic element or compound that occurs naturally and has an orderly internal structure as well as a distinct chemical composition, crystal form, and physical properties.
  • Quartz, feldspar, mica, amphibole, olivine, and calcite are examples of common minerals. Minerals are elements found on the earth and in foods that our bodies require for normal development and function.
  • Calcium, phosphorus, potassium, sodium, chloride, magnesium, iron, zinc, iodine, chromium, copper, fluoride, molybdenum, manganese, and selenium are all necessary for good health.

To learn more about mineral, refer to:

brainly.com/question/15844293

#SPJ2

When a mineral cools very quickly, the grain size will be tiny. When a mineral cools very slowly, the grain size will be large.

Which will cause an increase in the reaction rate between molecules? Molecules have strong internal bonding. Molecules collide more frequently. Electrons in the bonds remain in a meta-stable state. Electrons do not have enough energy to leave the bonds.

Answers

Answer:

           Molecules Collide more frequently

Explanation:

The factors which effect the rate of reactions are as follow,

                  Concentration:

                                           Increase in concentration of reactants will increase the number of reactants per unit volume. Therefore, the probability of collisions will increase hence, it will result in the increase in yield.

                  Temperature:

                                       Increase in temperature increases the kinetic energy of reactants. Therefore, the increase in velocity of reactants results in the collisions with high energy. It makes it feasible for reactants to attain the optimum energy (activation energy) to convert into products with good yield.

                 Surface Area:

                                      The reactants in grinded / powder form reacts fast as compared to solid form. In fact, grinding results in increase of the surface area of reactants. Greater surface area increases the probability of reactants to colloid. Hence, increases the yield.

Conclusion:

                   As shown, all the given factors are related to collisions of molecules or atoms hence, the option selected is the correct option.

Answer: molecules collide more frequently.

Chemical reaction mechanisms are based in the collision of molecules with certaing level of energy. More collisions implies grater probablity of reaction.

Classify each of the following statements as an experiment, a hypothesis, a scientific law, an observation, or a theory. For example, Joseph Gay-Lussac reacted hydrogen and oxygen to produce water vapor, and he reacted nitrogen and oxygen to form either dinitrogen oxide (N2O) or nitrogen monoxide (NO). Gay-Lussac found that hydrogen and oxygen react in a 2:1 volume ratio and that nitrogen and oxygen can react in 2:1 or 1:1 volume ratios depending on the product. In 1808, Gay-Lussac published a paper in which he stated that the relative volumes of gases in a chemical reaction are present in the ratio of small integers provided that all gases are measured at the same temperature and pressure. In 1811, Amedeo Avogadro proposed that equal volumes of all gases measured at the same temperature and pressure contain the same number of molecules. By midcentury, Rudolf Clausius, James Clerk Maxwell, and others had developed a detailed rationalization of the behavior of gases in terms of molecular motions

Answers

Answer:

Classify each of the following statements as an experiment, a hypothesis, a scientific law, an observation, or a theory.

(1) For example, Joseph Gay-Lussac reacted hydrogen and oxygen to produce water vapor, and he reacted nitrogen and oxygen to form either dinitrogen oxide (N2O) or nitrogen monoxide (NO). Gay-Lussac found that hydrogen and oxygen react in a 2:1 volume ratio and that nitrogen and oxygen can react in 2:1 or 1:1 volume ratios depending on the product.

(2) In 1808, Gay-Lussac published a paper in which he stated that the relative volumes of gases in a chemical reaction are present in the ratio of small integers provided that all gases are measured at the same temperature and pressure.

(3) In 1811, Amedeo Avogadro proposed that equal volumes of all gases measured at the same temperature and pressure contain the same number of molecules.

(4) By midcentury, Rudolf Clausius, James Clerk Maxwell, and others had developed a detailed rationalization of the behavior of gases in terms of molecular motions

The correct answers to the question are as follows

(1) An experiment

(2) A scientific law

(3) A hypothesis

(4) A theory

Explanation:

(1)  An experiment

A scientific experiment involves the development of procedures to verify an hypothesis

(2) A scientific law

A scientific law is a description or general rule to explain an observed phenomenon using a mathematical or verbal statement without attempting to provide an explanation

(3) A hypothesis

An hypothesis is an explanation of an observed phenomenon which can then be tested through the performance of experiments

(4) A theory

A theory in science is an explanation of naturally occurring phenomenon backed up by the results of experiments and observation

Final answer:

The given statements have been classified as experiment (1), observation (2), scientific law statement (3), hypothesis (4), and theory (5) respectively in the context of Chemistry.

Explanation:

1. Joseph Gay-Lussac reacted hydrogen and oxygen to produce water vapor, and he reacted nitrogen and oxygen to form either dinitrogen oxide or nitrogen monoxide: This is an experiment.

2. Gay-Lussac found that hydrogen and oxygen react in a 2:1 volume ratio and that nitrogen and oxygen can react in 2:1 or 1:1 volume ratios depending on the product: This is an observation.

3. In 1808, Gay-Lussac published a paper in which he stated that the relative volumes of gases in a chemical reaction are present in the ratio of small integers provided that all gases are measured at the same temperature and pressure: This is a statement of a scientific law.

4. In 1811, Amedeo Avogadro proposed that equal volumes of all gases measured at the same temperature and pressure contain the same number of molecules: This is a hypothesis.

5. By midcentury, Rudolf Clausius, James Clerk Maxwell, and others had developed a detailed rationalization of the behavior of gases in terms of molecular motions: This is a theory.

Learn more about Scientific Statements Classification here:

brainly.com/question/33716172

#SPJ3

The oxygen side of a water molecule is _____.neutral
slightly negative
slightly positive

Answers

Answer is "slightlynegative".

Explanation

In water molecule, there are 3 atoms which belonged to 2 elements. They are 2 Hatoms and 1 O atom. Oxygen atom is more electronegative than H atom. Hence,Oxygen atom in the water molecule gets a 
slightly negative chargeon it.

What is electronegativity?

Electronegativity is a value that tells us how an atom can attract electronstowards itself.
It helps us to tell the nature of molecule (as polar or non-polar) and thenature of the bond between atoms (as ionic or covalent). 
If the electronegativity is high, then the attraction to the electrons is highunless the attraction to the electrons is low. 
If the attraction towards electrons is high, then that atom gains a negativecharge on it. 


Answer:

The correct answer is: B

Explanation:

slightly negative

Hope this helps! :)

Plz mark Brainliest! Trying to rank up!

Have a nice day!