A galilean telescope adjusted for a relaxed eye is 36cm long. If the objective lens has a focal length of 40cm, what is the magnification?

Answers

Answer 1
Answer: For this problem, we use the mirror equation which is expressed as:

1/di + 1/f = 1/d0 

Magnification is expressed as the ratio of di and d0.

Manipulating the equation, we will have:

M = di/f +1
M = 36/40 + 1
M = 1.9

Hope this answers the equation.

Related Questions

A businessperson took a small airplane for a quick flight up the coast for a lunch meeting and then returned home. The plane flew a total of 4 hours, and each way the trip was 200 miles. What was the speed of the wind that affected the plane, which was flying at a speed of 120mph? Round your answer to the nearest whole number.
A small segment of wire contains 10 nC of charge. The segment is shrunk to one-third of its original length. A proton is very far from the wire. What is the ratio Ff/Fi of the electric force on the proton after the segment is shrunk to the force before the segment was shrunk?
The measurement of an electron's energy requires a time interval of 1.2×10^−8 s . What is the smallest possible uncertainty in the electron's energy?
Which is the SI base unit for mass?
A basketball player jumps straight up for a ball. To do this, he lowers his body 0.250 m and then accelerates through this distance by forcefully straightening his legs. This player leaves the floor with a vertical velocity sufficient to carry him 0.960 m above the floor. (a) Calculate his velocity (in m/s) when he leaves the floor. 4.33 Correct: Your answer is correct. m/s (b) Calculate his acceleration (in m/s2) while he is straightening his legs. He goes from zero to the velocity found in part (a) in a distance of 0.250 m.

____ can be calculated if you know the distance that an object travels in one unit of time. A.motion
B.meter
C.Rate
D.Speed
E.velocity
F.slope
G.refrence point

PLS HELP NOW !!!

Answers

Speed can be calculated if you know the distance that an object travels in one unit of time, therefore the correct answer is option D.

What is speed?

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object.

The unit of speed is a meter/second. The generally considered unit for speed is a meter per second.

Thus, Speed can be calculated if you know the distance that an object travels in one unit of time, therefore the correct answer is option D.

Learn more about speed from here, refer to the link;

brainly.com/question/7359669

#SPJ2

Answer:

D.Speed

Explanation:

The speed of an object is the distance the object travels in one unit of time.

In a solution such as salt water, the component that does the dissolving is called the?

Answers

Answer:

Solvent

Explanation:

  • A solution is a substance that is made by dissolving one component in another.
  • It is made up of a solvent and a solute.
  • The component that dissolves the other is known as solvent. Examples of solvents include water, ethanol, milk, chloroform, etc.
  • The component that dissolves in the other is known as the solute. Examples of solute include salts, sugar, etc.
  • For example in an aqueous solution of sodium chloride(NaCl); sodium chloride salt is the solute while water is the solvent.

What happens to a black body radiator as it increases in temperature? A. it gives off a range of electromagnetic radiation of shorter wavelengths.
B. It gives off only one wavelength of electromagnetic radiation
C. It releases only ultraviolet waves of electromagnetic radiation
D. It becomes hotter but gives off less electromagnetic radiation

Answers

The black body radiator as it increases in temperature gives off a range of electromagnetic radiation of shorter wavelengths so, the option A is correct.

What is radiation?

Radiation is the movement of atomic and subatomic particles as well as waves, such as those that define X-rays, heat rays, and light rays. Radiation of both types, from cosmic and earthly sources, is constantly being thrown at all matter.

The characteristics and behavior of radiation, as well as the matter it interacts with, are outlined in this article, which also explains how energy is transferred from radiation to its surroundings.

The effects of such an energy transfer to living matter, including the typical effects on numerous biological processes, are given a great deal of attention (e.g., photosynthesis in plants and vision in animals).

Thus, the black body radiator gives off a range of electromagnetic radiation of shorter wavelengths.

To know more about radiation:

brainly.com/question/29333363

#SPJ2

Answer: A

Explanation:

Answer is a hope this helps guys!

Early in the morning, when the temperature is 5.5 °C, gasoline is pumped into a car’s 53-L steel gas tank until it is filled to the top. Later in the day the temperature rises to 27 °C. Since the volume of gasoline increases more for a given temperature increase than the volume of the steel tank, gasoline will spill out of the tank. How much gasoline spills out in this case?

Answers

Answer:

Volume of gasoline spills out is 0.943 L.

Explanation:

Volumetric expansion of both gasoline and steel tank is :

\beta_(gas)=9.5 *10^(-4)/K\n\beta_(steel \ gas)=3.6 * 10^(-5)/K.  { source Internet}

We know expansion due to temperature change is :

\Delta V=\beta*\Delta T* V

For gasoline:

\Delta V_g=0.98 \ L.\n

Similarly for Steel tank:

\Delta V_(steel \ gas)=0.037\ L.

Now, volume of gasoline spills out is equal to difference between expansion in volume.

\Delta V_(gas)-\Delta V_(Steel \ gas)=0.98-0.037\ L=0.943\ L.

John and Suzie are trying to improve the speed of their race car by adjusting the angle of the rear spoiler. Which choice is the controlled variable(s)?the maximum speed and the angle of the rear spoiler


the type of tire and the type of fuel


only the maximum speed


only the angle of the rear spoiler

Answers

Answer:

the type of tire and the type of fuel

Explanation:

A round pipe of varying diameter carries petroleum from a wellhead to a refinery. At the wellhead, the pipe's diameter is 59.1 59.1 cm ( 0.591 0.591 m) and the flow speed of the petroleum is 11.9 11.9 m/s. At the refinery, the petroleum flows at 5.29 5.29 m/s. What is the volume flow rate of the petroleum along the pipe and what is the pipe's diameter at the refinery?

Answers

Answer:

The volume flow rate is 3.27m³/s

Diameter at the refinery is 88.64cm

Explanation:

Given

At the wellhead

Pipes diameter, d2 = 59.1cm = 0.591m

Flow speed of petroleum f2 = 11.9m/s

At the refinery,

Pipes diameter, d1 = ? Unknown

Flow speed of petroleum, f1 = 5.29m/s

Calculating the volume flow rate of petroleum along the pipe.

Volume flow rate = Flow rate * Area along the pipe

V = 11.9 * πd²/4

V = 11.9 * 22/7 * 0.591²/4

V = 3.265778m³/s

The volume flow rate is 3.27m³/s -------- Approximated

Since it's not stated if the flowrate is uniform throughout the pipe, we'll assume that flow rate is the same through out...

Using V1A1 = V2A2, where V1 & V2 Volume flow rate at both ends and area = Area of pipes at both ends

This gives;

V1A1 = V1A2

V1*πd1²/4 = V2 * πd2²/4 ----------- Divide through by π/4

So, we are left with

V1d1² = V2d2²

5.29 * d1²= 11.9 * 59.1²

d1² = 11.9 * 59.1²/5.29

d1² = 7857.172

d1 = √7857.172

d1 = 88.6406904305240618

d1 = 88.64cm --------------- Approximated