The measure of distance from one point to another is?

Answers

Answer 1
Answer: The distance from one point to another is the distance traveled by a light beam between them.

If you have the coordinates of the 2 points, then the distance between them is

√ of [ (the difference in their x-values)² + (the difference in their y-values)² ]

Related Questions

Calculate the change in energy of an atom that emits a photon of wavelength 2.21 meters. (Planck’s constant is 6.626 x 10-34 joule seconds, the speed of light is 2.998 x 108 m/s)
Which types of reactions would result in the formation of precipitate?
Earth's first semi-permanent atmosphere consisted of abundant water vapor, carbon dioxide, nitrogen, ammonia, and traces of methane. these gases came from
What did researchers at Virginia Tech try using to help reforest post-mining site soil?
Properties that make titanium useful for tennis rackets and wheelchairs

Which is the most important factor in determining the state of a substance?

Answers

Out of the following given choices;

A. the size of the atoms in a substance

B. the number of molecules in a substance

C. the position of the electrons on the outer valence shells

D. the balance between intermolecular forces and kinetic energy

The answer is D. The kinetic energy of the molecules is determines by the temperatures of the substance. The higher the temperatures, the higher the kinetic energy of the molecules. The molecules subsequently move and collide with higher energies and overcome intermolecular forces. This allows the substance to changes state from solid to liquid and eventually to gas (with increasing kinetic energy).

The most important state in determining the state of a substance is temperature. This is because the kinetic energy of a substance's molecules depend on its temperature. For example, an increase in temperature speeds up the movement of molecules. A decrease in temperature slows down the movement of molecules.

This is important because by increasing or decreasing a substance's temperature, you are also adding or removing energy from it. And when a substantial amount of energy has been added or removed, a substance can change its state from solid > liquid > gas or the other way around.

What location is 90 degrees away from the equator?A) The south pole
B) Polaris
C) Both A & B
D) The north pole

Answers

C) both A and B

Each parallel measures one degree north or south of the Equator, with 90 degrees north of the Equator and 90 degrees south of the Equator
Hope this helps!

Answer:

C) Both A and B

Explanation:

The axis of 0 degrees latitude is known as the Equator. With 90 degrees north of the Equator and 90 degrees south of the Equator, each parallel measures one degree north or south of the Equator. The North Pole is 90 degrees north latitude, and the South Pole is 90 degrees south latitude.

An example of a physical property of an element is the element’s ability to(1) react with an acid(2) react with oxygen(3) form a compound with chlorine(4) form an aqueous solution

Answers

Answer is: 4) form an aqueous solution.

Physical property can be observed and measured without any changes in molecular composition. The same substance is present before and after the change.  Making aqueous solution is physical change (solvatation).

Element reactions with acids, oxygen and chlorine are chemical change (chemical reaction combustion), because new substances are formed, the atoms are rearranged and the reaction is followed by an energy change (exothermic reaction because energy is released).

4: Form An Aqueous Solution 

This is the only answer that can be observed without testing gear and with the naked eye.... Hope I helped ^-^

William finds a piece of pure iron in his garden. After a few days, the iron begins to rust. What are the two types of substances involved in the rusting process of iron? Iron is with one kind of atom that combines with oxygen from the air to form rust (iron oxide). Rust contains two types of atoms, which means it is .

Answers

Answer:

  • Iron
  • Oxygen

Explanation:

Rusting of iron occurs during the reaction of iron and oxygen in the presence of moisture to form hydrous iron (III) oxide, which is a reddish brown substance.

By virtue of this, the atoms which are reactants in the redox reaction would e oxygen and iron.

I hope this was clear and easy to understand.

like and rate <3

an element

a compound

the mass of empty cylinder is 20 gram its mass when its filled completely with water is 30 gram and its mass when its filled completely with unknown liquid is 27 gram find the density of, the unknown liquid ​

Answers

Answer:

≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)

Explanation:

The mass of empty cylinder is 20g

The mass of water filling the cylinder = 30g - 20g = 10g

The mass of unknown liquid filling the cylinder = 27g - 20g = 7g

Density of water = 997 kg/m³

Converting this density to g/cm³ we get;

1kg = 1000g , 1m³ = 1000000cm³

So density = (997000)/(1000000) g/cm³ = 0.997 g/cm³

So the volume of water occupied by 10g is;

10 × 0.997 = 9.97 cm³

This volume is also occupied by 7g of the unknown liquid.

Density = mass/volume

Density of the unknown liquid = 7g ÷ 9.97cm³ = 0.702106319 g/cm³ ≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)

1.09 L of a gas at standard temperature and pressure is compressed to 374 ml. what is the new pressure of the gas?

Answers

This can be solved using the equation PV = nRT, but there is an easier way using Boyle's Law. This law states that the product of pressure and volume are constant in a system with constant temperature. This means that we can set the product of initial pressure and volume equal to the final pressure and volume. Maybe you have seen this equation as P1V1 = P2V2.  We know that temperature is constant at 0 degrees Celsius (or 273.15 K), and that the initial pressure is standard at 1 atmosphere (atm). This means our knowns are:
P1 = 1 atm    V1 = 1.09 L    V2 = 0.374 L (from 374 mL)
Plug these into the Boyle's Law equation P1V1 = P2V2:
(1 atm)*(1.09 L) = (P2) * (0.374 L)
(1 atm)*(1.09 L)/(0.374 L) = P2
P2 = 2.91 atm