A graph or a table.
You can use a graph or a table to make the point muchstronger than just describing the data. A graph can be used to represent one ofmore sets of data graphically. A table in this case as compared to a graph isless effective because it only shows the data whereas the graph shows an interpretationof data. However, you can use a table from an excel sheer to enter raw data and make some complex andsimple calculations.
and (2, 2, 3, 5, 5, 7), the output should be (2, 5, 5).
Answer:
while list1 not empty AND list2 not empty {
if elements at leftmost positions are equal {
pop element from list1
pop element from list2
add element to result_list
} else {
pop lowest value from list1 or list2
}
}
b) source address
c) type of application
The most significant protocol at layer 3, often known as the network layer, is the Internet Protocol, or IP.The IP protocol, the industry standard for packet routing among interconnected networks, is the source of the Internet's name. Thus, option C is correct.
Application-layer firewalls operate at the TCP/IP stack's application level (all browser traffic, or all telnet or ftp traffic, for example), and thus have the ability to intercept any packets going to or from an application. They stop different packets (usually dropping them without acknowledgment to the sender).
Firewalls are frequently positioned at a network's edge. An external interface is the one that is located outside the network, while an internal interface is the one that is located inside the firewall.
Therefore, The terms “unprotected” and “protected,” respectively, are sometimes used to describe these two interfaces.
Learn more about TCP/IP here:
#SPJ2
The answer is c) type of application
Answer:
True
Explanation:
The arithmetic and logic unit (ALU) in a microprocessor is the digital electronic component which carries out arithmetic and logic operations on the provided operands. It is typically integrated as part of the microprocessor chip though standalone ICs are also available.
Some examples of the operations performed by ALU in common microprocessors include:
Answer:
Following are the solution to the given question:
Explanation:
The subject I select is Social Inclusion Management because I am most interested in this as I would only enhance my wide adaptability and also people's ability to know and how I can manage and understand people.
Under 15 min to this location. The time I went online but for this issue, I began collecting data on the workability to tap, such as a connection to the monster, glass doors, etc.
For example. At example. I get to learn through indeed.com that the HR manager's Avg compensation is about $80,600 a year. I can gather from Linkedin data about market openings for HR at tech companies like Hcl, Genpact, etc. Lenskart has an HR director open vacancy.
This from I learns that for qualified practitioners I have at least 3 years experience in the management of human resources & that I need various talents like organizing, communications, technical skills, etc.
Answer:
-11001
Explanation:
The following steps are performed in order to perform subtraction of the given binary numbers:
Step 1:
Find 2’s complement of the subtrahend. The subtrahend here is 100000
100000
First take 1's complement of 100000
1's complement is taken by inverting 100000
1's complement of 100000 = 011111
Now takes 2's complement by adding 1 to the result of 1's complement:
011111 + 1 = 100000
2's complement of 100000 = 100000
Step 2:
Add the 2's complement of the subtrahend to the minuend.
The number of bits in the minuend is less than that of subtrahend. Make the number of bits in the minuend equal to that of subtrahend by placing 0s in before minuend. So the minuend 111 becomes:
000111
Now add the 2's complement of 100000 to 000111
0 0 0 1 1 1
+ 1 0 0 0 0 0
1 0 0 1 1 1
The result of the addition is :
1 0 0 1 1 1
Step 3:
Since there is no carry over the next step is to take 2's complement of the sum and place negative sign with the result as the result is negative.
sum = 1 0 0 1 1 1
2's complement of sum:
First take 1's complement of 1 0 0 1 1 1
1's complement is taken by inverting 1 0 0 1 1 1
1's complement of 1 0 0 1 1 1 = 0 1 1 0 0 0
Now takes 2's complement by adding 1 to the result of 1's complement:
0 1 1 0 0 0 + 1 = 0 1 1 0 0 1
Now place the minus sign with the result of 2's complement:
- 0 1 1 0 0 1
Hence the subtraction of two binary numbers (100000)₂ and (111)₂ is
(-011001)₂
This can also be written as:
(-11001)₂
Answer:
Explanation:
In real-world environments, once the domains that are affected by the risks are identified, subsequent next steps would include selecting, implementing, and testing controls to minimize or eliminate those risks.