Energy is transferred by the process of convection from the hot water at the bottom of the tank to the cooler water at the top. Explain how

Answers

Answer 1
Answer:

When hot water comes in contact with cold water , the hot water from the bottom of the vessel is hot and so reduces its density. So low density ware goes up and cold water from side or above replaces the space. This is how Energy is transferred by the process of convection from the hot water at the bottom of the tank to the cooler water at the top.

What is convection?

The process of heat transfer from one part of a fluid to another part by the actual movement of the particles of the fluid is called convection. Liquid and gases are heated by the process of convection.

When hot water comes in contact with cold water , the hot water from the bottom of the vessel is hot and so reduces its density. So low density ware goes up and cold water from side or above replaces the space. This is how Energy is transferred by the process of convection from the hot water at the bottom of the tank to the cooler water at the top.

learn more about convection

brainly.com/question/16635311?referrer=searchResults

#SPJ2

Answer 2
Answer: The transfer of energy means, in convention process, transport of matter. In this case, hot water has lower density than cool water. The water with less density ascends and leaves gaps that are occupied with cooler water "packages".

Related Questions

A charged object cannot attract a neutral object. a. True b. False
In which type of wave do the particles in a medium move perpendicular to the direction that the wave moves? A.transverse waves B.ocean waves C.surface waves D.longitudinal waves
The diffuser in a jet engine is designed to decrease the kinetic energy of the air entering the engine compressor without any work or heat interactions. Calculate the velocity at the exit of a diffuser when air at 100 kPa and 30°C enters it with a velocity of 357 m/s and the exit state is 200 kPa and 90°C. The specific heat of air at the average temperature of 60°C = 333 K is cp = 1.007 kJ/kg·K.
Humpty Dumpty (12 kg) sat on a wall (2 m high). What was his potential energy, before his great fall? A. 235.2 J B. 235.2 N C. 24 J D. 246.1 W
a 1.0-kg ball is thrown into the air with an initial velocity of 30. m/s. a. how much kinetic energy does the ball have? b. how much potential energy does the ball have when it reaches the top of its ascent? c. how high into the air did the ball travel?

People in the United States know that water boils at 212°F. In Europe,people know that water boils at 100°C. Is the water in the U.S. different
than the water in Europe? What explains the two different temperatures?

Answers


They are not two different temperatures.  They are two different
descriptions of the same temperature, using different-size degrees
and different scales.  A lot like "60 miles per hour" and "96.6 kilometers
per hour" ... the same speed. 

In the case of the temperatures, the tags " °F " and " °C " show that the
units are different.  And even though it's not obvious from the descriptions,
they also start counting at different temperatures.

How many types of quarks are there?
a. 2
b. 4
c. 6
d. 8

Answers

There are 6 types of quarks.

Answer: C. 6
The are 6 types of quarks: up, down, strange, charm, top, and bottom.
The answer:

C.6

a constant force of 391 n acts on a spacecraft of mass 7870 kg that has an initial velocity of 38 m/s. how far has the spacecraft traveled when it reaches a velocity of 4820 m/s?

Answers

Answer:

The distance travelled is 2.34*10^8 m.

Explanation:

The acceleration of the spacecraft is,

a=F/m

=391/7870 = 0.04968 m/s^2

The distance travelled,

d=v^2-v0^2/2a

=(4820)^2-(38)^2 / 2(0.04968)

=2.34*10^8 m.

Which of the following types of energy originates below Earth's surface?A. electrical energy
B. geothermal energy
C. mechanical energy
D. electromagnetic energy

Answers

Geothermal energy. Electromagnetic energy originates at the sun (think UV rays; they are part of the electromagnetic spectrum). Electrical energy technically can be anywhere, as long as there are positive and negative charges. Mechanical energy is like a generator or an engine; there is always something working to get things done/made. I hope this answer and these explanations helped!

A growing person needs a diet that supplies about 10MJ of energy per day. Calculate the amount of energy supplied by such a diet each second, and hence the person’s average power. (Give your answer to the nearest 10W)

Answers

We are given that a growing person needs a diet that supplies about 10 MJ of energy per day.

To convert this to energy supplied per second, we can use the following conversion:

1 day = 24 hours/day x 60 minutes/hour x 60 seconds/minute = 86400 seconds

Therefore, the energy supplied per second is:

10 MJ/day = 10,000,000 J/day ÷ 86400 seconds/day = 115.74 J/s

The person's average power is the energy supplied per second, which is:

P = 115.74 J/s ≈ 120 W (rounded to the nearest 10 W)

Therefore, the person's average power is approximately 120 W.

To know more about average power, click here:-

brainly.com/question/30888338

#SPJ11

Within a single use of the scientific method, which of the following steps can only be performed afterdata is collected?
A. Controls and variables are chosen.
B. The initial experiment is designed.
C. The initial hypothesis is formed.
D. Conclusions are drawn.

Answers

Within a single use of the scientific method, the step which would be performed after we collect data, would be the drawing of a conclusion out of the answers that you've presented - D.

It is usually the case that you first have to analyze the data after you've gather it and then you base your conclusions on it. This isn't, however, always the case.