Answer:
Boolean expression
Explanation:
The operator '&&' is called AND operator. it provide the output base on the Boolean value on each side of AND operator.
it has four possible values:
First Boolean is TRUE and Boolean is TRUE, then result will be TRUE.
First Boolean is TRUE and Boolean is FALSE, then result will be FALSE.
First Boolean is FALSE and Boolean is TRUE, then result will be FALSE.
First Boolean is FALSE and Boolean is FALSE, then result will be FALSE.
Therefore, the correct option is Boolean expression.
Half-duplex serial data transmission allows for communication in both directions, but only one direction at a time. In applications such as walkie-talkies and traditional telephone systems.
In half-duplex serial data transmission, data is transmitted in one direction at a time
1. Sender initiates transmission: The sender, also known as the transmitter, starts the data transmission process. It prepares the data to be sent and waits for the appropriate time to start transmitting.
2. Sender sends data: The sender begins sending the data in a sequential manner. It breaks down the data into smaller units called frames or packets.
3. Receiver acknowledges receipt: After receiving each frame, the receiver acknowledges its successful reception to the sender.
4. Sender waits for acknowledgment: Upon sending a frame, the sender waits for the receiver's acknowledgment. If an acknowledgment is received, the sender proceeds to send the next frame.
5. Receiver processes the data: The receiver receives the frames and processes the data within each frame. It checks for errors using techniques like checksums or cyclic redundancy checks (CRC).
6. Roles switch for bidirectional communication: Once the sender finishes transmitting its data, the roles switch and the receiver becomes the sender, initiating its own transmission.
7. Communication continues: The process continues as the receiver sends its data and waits for acknowledgments, while the new sender processes the received data and sends acknowledgments.
Overall, half-duplex serial data transmission allows for communication in both directions, but only one direction at a time. This type of transmission is commonly used in applications such as walkie-talkies and traditional telephone systems.
Learn more about half-duplex serial here;
#SPJ3
Answer:
In half duplex mode, the signal is sent in both directions, but one at a time. In full duplex mode, the signal is sent in both directions at the same time. In simplex mode, only one device can transmit the signal. In half duplex mode, both devices can transmit the signal, but one at a time.
2. Range
3. WiFi protected setup
4. Ad-hoc configuration
Based on the information given, the correct options are performance and range.
It should be noted that a mesh network can be regarded as the local network topology whereby infrastructure nodes connect directly, with other different nodes ,cooperate with one another so that data can be efficiently route from/to clients.
The advantage of configuring a wireless mesh network is that it enhances performance and range.
Learn more about network on:
Answer:
1)PERFORMANCE
2)RANGE
Explanation:
A mesh network can be regarded as local network topology whereby infrastructure nodes connect dynamically and directly, with other different nodes ,cooperate with one another so that data can be efficiently route from/to clients. It could be a Wireless mesh network or wired one.
Wireless mesh network, utilize
only one node which is physically wired to a network connection such as DSL internet modem. Then the one wired node will now be responsible for sharing of its internet connection in wireless firm with all other nodes arround the vicinity. Then the nodes will now share the connection in wireless firm to nodes which are closest to them, and with this wireless connection wide range of area can be convered which is one advantage of wireless mesh network, other one is performance, wireless has greater performance than wired one.
Some of the benefits derived from configuring a wireless mesh network is
1)PERFORMANCE
2)RANGE
Please Answer Fast!
Answer:
Functions of an operating system. An operating system provides three essential capabilities: It offers a UI through a CLI or GUI; it launches and manages the application execution; and it identifies and exposes system hardware resources to those applications -- typically, through a standardized API.
Explanation:
A description
B. judgment
C. interpretation
D. analysis
Reset
Next
Answer: B. judgment
Explanation: To critique a work of art, there are a 4 steps method:
Description: describe everything you see in the work: name of the artist, the title, what you observe, what media he/she used, the year it was created;
Analysis: describe how the artist uses the elements of art (line, shape, color, texture, space) and the principlesofdesign (balance, movement, pattern, emphasis, contrast);
Interpretation: try to explain what is the meaning of the art, why the artist created it, what was he/she's idea for it, based on the 2 previous steps;
JudgmentorEvaluate: make an opinion of why the art is worth it based on the other steps and give reasons for liking or disliking, its importance or the way it make you feel;
After going through each step, your evaluation or opinion will be expressed in the 4th step: Judgment.
What are you asking for
Answer:
Expected CPU time: 1.875 seconds.