Scuba Diving. Marcy invented a new type of mask for scuba divers that was not subject to fogging. She agrees to allow Jenny to manufacture and sell the mask. She receives a sum of money for every mask that Jenny sells. Similarly, Marcy entered into an agreement with Frank to allow him to sell the masks, but only if he also purchased non-patented diving suits from Marcy. All parties proceeded to do very well with their sales. Which of the following describes the agreement between Marcy and Frank?1)It is a legal tying arrangement.
2)It is a legal cross-licensing agreement.
3)It is an illegal tying arrangement.
4)It is an illegal cross-licensing agreement.
5)It is both a legal tying and a legal cross-licensing agreement.
Answers
Answer:
3) It is an illegal tying arrangement.
Explanation:
Tying is said to be an illegal arrangement where, for one to buy a product, the consumer must purchase another product that exists in a separate market. There isn't any legal backing but things work out well for all parties involved.
Related Questions
Payments made to an insurance company in return for a policy of insurance are called :A. risk expenses B. premiums C. risk expenditures D. deductibles
Assume the spot market exchange rate for $1 is currently A$1.1904. The expected inflation rate is 3.3 percent in Australia compared to the U.S. rate of 2.8 percent. What is the expected exchange rate one year from now if relative purchasing power parity exists?a. $1.1844 b. $1.2062 c. $1.1964 d. $1.2286
Pendergast, Inc., has no debt outstanding, and has a total market value of $180,000. Earnings before interest and taxes (EBIT) are projected to be $23,000 if economic conditions are normal. If there is a strong expansion in the economy, then EBIT will be 20% higher. If there is a recession, then EBIT will be 30% lower. Pendergast is considering a $75,000 debt issue with a 7% interest rate. The proceeds will be used to repurchase shares of stock. There are currently 6,000 shares of stock outstanding, and the relevant tax rate is 35%. a- Calculate ROE and EPS under each of the economic scenarios before any debt is issued. b- Repeat part a, assuming that the company goes through with the capitalization. c- Calculate the percentage changes in EPS when the economy expands or enters a recession.
Bedeker, Inc., has an issue of preferred stock outstanding that pays a $6.55 dividend every year in perpetuity. If this issue currently sells for $91 per share, what is the required return? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.)
Answers
Answer:
Fixed Cost 216,640
Explanation:
The first step is calculate the difference between activity levels
This tell us 25 units generated cost for 154,000
154,000 / 25 = Variable Cost = 6,250
Now we use either the low or high values to solve for fixedcost:
total = variable + fixed
fixed = total - variable
HIGH
Total Cost 500,000
Variable 283,360 (6,250 x 46)
Fixed Cost 216,640
LOW
Total Cost 346,000
Variable 129,360 (6,250 x 21)
Fixed Cost 216,640
Answers
Answer:
Instructions are below.
Explanation:
Giving the following information:
Department A:
Direct labor cost= $60,000
Manufacturing overhead= $90,000
Department B:
Manufacturing overhead= $45,000
Machine-hours= 2,000
To calculate the predetermined manufacturing overhead rate we need to use the following formula:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Department A:
Predetermined manufacturing overhead rate= 90,000/60,000
Predetermined manufacturing overhead rate= $1.5 per direct labor dollar
Department B:
Predetermined manufacturing overhead rate= 45,000/2,000= $22.4 per machine-hour
Answers
Final answer:
Upon assessing the costs of adding new suppliers and potential losses from a super-event, Phillip Witt of Witt Input Devices should manage three suppliers. Each supplier acts as an insurance against the super-event, with the cost to manage a new supplier being less than the potential loss from a super-event.
Explanation:
In this scenario, the president of Witt Input Devices, Phillip Witt, should consider the cost of adding a supplier against the potential risk of having them all shut down, causing a significant loss. The disadvantage of getting a new supplier is the marginal cost, which is $14,800. On the other hand, the potential loss that the firm could suffer in the event of a super-event is $480,000.
To solve this scenario, you need to consider each supplier as a form of insurance against the super-event. By looking at the probability of the super-event, we can obtain the expected loss per year which is 3% of $480,000 (0.03 * 480000 = $14,400).
Considering all factors, it appears that it would be economically feasible for Phillip Witt to manage three suppliers because the expected potential loss is less than the expense of adding a new supplier. Therefore, his best strategy is to maintain all three suppliers to minimize the overall risk.
Learn more about Risk Management here:
#SPJ12
Final answer:
To minimize costs, Witt Input Devices should consider the likelihood of a total shutdown and the cost of managing additional suppliers. By calculating the expected cost for different numbers of suppliers, we can determine the optimal number that minimizes costs. This decision depends on the specific probabilities and costs involved.
Explanation:
To determine the number of suppliers that Witt Input Devices should use, we need to consider the likelihood of a total shutdown due to a 'super-event' and the cost of managing additional suppliers. According to the given information, there is a 3% probability in any year of a 'super-event' shutting down all suppliers for at least 2 weeks, resulting in a cost of $480,000. The 'unique-event' risk for any individual supplier is 5%. To minimize the overall costs, we should calculate the optimal number of suppliers by comparing the cost of managing additional suppliers to the potential losses from a shutdown.
The marginal cost of managing an additional supplier is $14,800 per year. Let's assume that Witt Input Devices can choose up to three nearly identical local suppliers, and we need to find the ideal number of suppliers for minimizing costs. We can start with one supplier and calculate the expected cost. If there is a 'super-event,' the cost will be $480,000. If there is no 'super-event,' the cost will be the annual cost of managing one supplier, which is $14,800.
Next, we can calculate the expected cost for two suppliers. The probability of both suppliers being shut down due to a 'super-event' is the square of the individual risk, which is (0.03)^2 = 0.0009. The cost would then be $480,000. The probability of only one supplier being shut down is calculated as the sum of the probability of exactly one supplier being shut down multiplied by the probability of the other supplier not being shut down. This comes out to be 2 * (0.03) * (0.97) = 0.0582. In this case, the cost would be 2 * $14,800 = $29,600. Finally, the probability of both suppliers being operational is (0.97)^2 = 0.9409, resulting in a cost of 2 * $14,800 = $29,600. Therefore, the expected cost with two suppliers is 0.0009 * $480,000 + 0.0582 * $29,600 + 0.9409 * $29,600.
We can extend this calculation to find the expected cost for three suppliers. The probabilities of all three suppliers being shut down, two suppliers being shut down and one supplier being operational, and one supplier being shut down and two suppliers being operational can be calculated using the same approach. The expected cost in this case will be 0.0009 * $480,000 + 0.0582 * $29,600 + 0.0582 * $29,600 + 0.9409 * $29,600.
By comparing the expected costs for each number of suppliers, we can determine the optimal number of suppliers that minimizes costs. The answer will be the number of suppliers with the lowest expected cost. The result will depend on the specific values of the probabilities and costs involved.
Learn more about Determining the optimal number of suppliers for cost minimization here:
#SPJ2
Answers
Answer:
total ending WIP value 39,334.20
transferred-out 432.078.00
Explanation:
Ending work in proces inventory
we multiply the equivalent units by the cost per equivlent unit
materials 2,200 x 15.26 = 33,572
converion 940 x 6.13 = 5,762.2
then, we add them to get thetotal value of the ending WIP
total ending WIP value 39,334,2
for the transferred out, we add both equivalent cost as this are complete.
And multiply by the whole amount 20,200
trasnferred out: 20,200 x (15.26 + 6.13) = 432.078
Answers
Final answer:
The basic Earnings Per Share (EPS) for Wells Fargo for 2015 is $4.57 and for 2014 is $4.54, calculated by subtracting preferred dividends from net income and dividing by average common shares.
Explanation:
The provided figures help us calculate the basic Earnings Per Share (EPS) for Wells Fargo for 2015 and 2014. EPS is computed by taking the net income, subtracting the preferred stock dividends, and then dividing by the average common shares outstanding.
For 2015, the calculation is as follows: ($25,116 million - $1,646 million) / 5,136.5 = $4.57 EPS.
Moreover, for 2014, we find: ($25,279 million - $1,458 million) / 5,237.2 = $4.54 EPS.
These EPS values help shareholders understand how much of a company's profit is attributable to each share of common stock.
Learn more about Calculating Earnings Per Share here:
#SPJ12
Answers
Based on the accrual method, the correct entry for $10,000 worth of services would be a debit to accounts receivable for $10,000 and a credit to Sales revenue for $10,000.
Why is this the correct entry?
The company has performed a certain service for a customer and hasn't been paid for it. The customer therefore owes the company which makes them an account receivable.
The $10,000 will be considered revenue by the company so they will credit the revenue account. Accounts Receivables are assets so this account will be debited.
Find out more on accounts receivables at brainly.com/question/24871345.
Final answer:
The company should debit (increase) the Accounts Receivable account by $10,000 and credit (increase) the Service Revenue account by $10,000. This follows the accrual method of accounting, in which revenues and expenses are recorded when they are earned and incurred, respectively.
Explanation:
The correct entry to record this transaction, using the accrual method, involves two accounts: Accounts Receivable and Service Revenue. Here is the step-by-step process of recording this transaction.
- Debit (increase) the Accounts Receivable account by $10,000. This step is done because the company has provided a service and is now entitled to receive money (accounts receivable) from the customer.
- Credit (increase) the Service Revenue account by $10,000. The company has earned revenue due to the service that they performed. Revenue increases by credits in the accounting equation.
Learn more about Accrual Method here:
#SPJ6