ENGINEERING COLLEGE

16) Find the output of the following flowchartAddress
100
101
102
103
104
105
Value
1
2.
3
8
15
16
hi
Answer:80​

Answers

Answer 1
Answer:

Answer:

364 566 inches of class-6th from a

Related Questions

If the specific surface energy for magnesium oxide is 1.0 J/m2 and its modulus of elasticity is (225 GPa), compute the critical stress required for the propagation of an internal crack of length 0.8 mm.
After the load impedance has been transformed through the ideal transformer, its impedance is: + . Enter the real part in the first blank and the imaginary part in the second blank. If a value is negative, include the negative sign. Provide up to four digits of precision. If the exact value can be provided with fewer digits, merely provide the exact value. These instructions pertain to the following blanks as well. What is the total impedance seen by the source? + . What is the current phasor Ig (expressed in rectangular form)?
8. Removing damage by tapping it out with a hammerand dolly is often referred to as(A) contouring(B) roughing out(C) forming(D) tapping out
How much computer memory (in bytes) in minimum would be required to store 10 seconds of a sensor signal sampled by a 12-bit A/D converter operating at a sampling rate of 5 kHz?
Every time I take a photo, that photo has to be stored in a file somewhere within "My Files" correct?How would I be able to take that photo out of the file it was stored?

What character string does the binary ASCII code 1010100 1101000 1101001 1110011 0100000 1101001 1110011 0100000 1000101 1000001 1010011 1011001 0100001?

Answers

Answer: This is EASY!

Explanation:

To make it easy, you would convert those binary numbers and to denary. And this gives:

84 104 105 115 32 105 115 32 69 65 83 89 33

Then, the denary numbers generated can be converted to ASCII code using this ASCII Table in the attachment below. And the result is: This is EASY!

(d) Arches NP is known for its spectacular arches that develop in the jointed areas of the park. Placemark Problem 2d flies you to Landscape Arch, the arch with the largest span in Arches NP. If the stresses that stretched the rock to form the joints were oriented perpendicular to the joint surfaces and the rock fins that contain the arches, what was the direction that the rocks were stretched? ☐ N-S
☐ E-W
☐ NW-SE
☐ NE-SW

Answers

Answer:

☐ NE-SW

Explanation:

Based on the description, the rock direction is North East - South West (NE-SW). Rocks generally can expand or compress depending on the type and magnitude of stress applied on the rocks. However, if the applied stress is sufficiently high, cracks and fractures will be created on the rock and it can ultimately lead to the formation of particles.

web application 3: where's the beef? provide a screenshot confirming that you successfully completed this exploit: [place screenshot here] write two or three sentences outlining mitigation strategies for this vulnerability: [enter answer here]

Answers

Web application 3’s “Where’s the Beef” exploit can be seen in the screenshot provided. In order to mitigate this vulnerability, developers should take measures to ensure that input validation is performed on all data.

Additionally, developers should enforce strict rules on which characters are allowed in user inputs and reject all requests that don’t follow these rules. Finally, developers should implement best practices such as password hashing to ensure that user data is secure.

Developers should use secure coding techniques, such as sanitizing user input and properly escaping HTML output, to protect against injection-based attacks. Also, developers should implement authentication and authorization techniques to ensure that only authorized users have access to sensitive data. Furthermore, developers should use an up-to-date web application firewall to protect against known exploits, and use secure protocols such as HTTPS to protect data in transit. Finally, developers should ensure that software is kept up-to-date and patched to prevent exploitation of known vulnerabilities.

Learn more about HTML

brainly.com/question/11569274

#SPJ11

A ___________ is defined as a change in shape of the part between the damaged and undamaged area hat is smooth and continuous. When the part is straightened, it is returned to proper shape and state without any areas of permanent deformation

Answers

A plastic deformation is defined as a change in shape of the part between the damaged and undamaged area that is smooth and continuous. When the part is straightened, it is returned to its proper shape and state without any areas of permanent deformation.

Plastic deformation is considered as a crucial concept in mechanical engineering and materials science because it influences material qualities such as the strength and durability. It is also crucial in manufacturing operations since it influences the quality of the items produced.

Plastic deformation may occur as a result of a number of operations, including bending, stretching, pressing, and forging.

For more such questions on deformation, click on:

brainly.com/question/63369

#SPJ11

Consider the string length equal to 7. This string is distorted by a function f (x) = 2 sin(2x) - 10sin(10x). What is the wave formed in this string? a. In=12cos (nit ) sin(max) b. 2cos(2t)sin (2x) - 10cos(10t ) sin(10x) c. n 2 sin 2x e' – 10sin 10x e

Answers

Answer:

hello your question has a missing part below is the missing part

Consider the string length equal to \pi

answer : 2cos(2t) sin(2x) - 10cos(10t)sin(10x)

Explanation:

Given string length = \pi

distorted function f(x) = 2sin(2x) - 10sin(10x)

Determine the wave formed in the string

attached below is a detailed solution of the problem

Shear modulus is analogous to what material property that is determined in tensile testing? (a)- Percent reduction of area (b) Yield strength (c)- Elastic modulus (d)- Poisson's ratio

Answers

Answer:

(c)- Elastic modulus

Explanation:

  We know that in tensile test we measure the properties of the material like yield strength,ultimate tensile strength ,Poisson ratio.

In tensile test

σ = ε E

Where σ is the stress

ε  is the strain.

E is the elastic modulus.

Now for shear tress

τ = Φ G

Where τ the shear stress

Φ  is the shear strain.

G  is the shear  modulus.

So we can say that Shear modulus is analogous to Elastic modulus.
Other Questions
Kim is working on the cost estimate and feasible design options for a building. Which stage of a construction plan is Kim working on now? A. design development B. schematic design C. mechanical D. structural
A container filled with a sample of an ideal gas at the pressure of 150 Kpa. The gas is compressed isothermally to one-third of its original volume. What is the new pressure of the gas a)-900 kpa b)- 300 kpa c)- 450 kpa d)- 600 kpa
What is the function of filters in communication system ?​
Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. The gas-turbine cycle of a combined gas–steam power plant has a pressure ratio of 8. Air enters the compressor at 290 K and the turbine at 1400 K. The combustion gases leaving the gas turbine are used to heat the steam at 15 MPa to 450°C in a heat exchanger. The combustion gases leave the heat exchanger at 247°C. Steam expands in a high-pressure turbine to a pressure of 3 MPa and is reheated in the combustion chamber to 500°C before it expands in a low-pressure turbine to 10 kPa. The mass flow rate of steam is 17 kg/s. Assume isentropic efficiencies of 100 percent for the pump, 85 percent for the compressor, and 90 percent for the gas and steam turbines.Determine the rate of total heat input.