CHEMISTRY COLLEGE

Which one of the following compounds will NOT be soluble in water? Which one of the following compounds will NOT be soluble in water? LiOH BaSO4 NaNO3 MgCl2 K2S

Answers

Answer 1

Answer:

Answer:

$BaSO_(4)$ will be not soluble in water

Explanation:

LiOH is a strong base. Hence it gets completely dissociated in aqueous solution.

$NaNO_(3)$ is a strong electrolyte. Hence it gets completely dissociated in aqueous solution.

$MgCl_(2)$ is a strong electrolyte. Hence it gets completely dissociated in aqueous solution.

$K_(2)S$ is a strong electrolyte. Hence it gets completely dissociated in aqueous solution.

$BaSO_(4)$ is a sparingly soluble salt. Hence it is not dissociated and hence dissolved in water. This is due to the fact that both $Ba^(2+)$ and $SO_(4)^(2-)$ ions are similar in size. Hence crystal structure of $BaSO_(4)$ is quite stable. Hence $BaSO_(4)$ is reluctant to undergo any dissociation in aqueous solution.

Related Questions

What are the two formulas for the ions that's make up AgC2H3O2 bromide?
PLEASEEEEEEEE ASAPPPPPWhat is the density of a piece of cardboard that has a mass of 250 g and volume of 46 mL? *
1. When an object wants to stay at rest or wants to stay in motion unlessan outside force comes and disturbs it.*
1. Based on the appearance of your reaction in the beaker, which reagent do you think was consumed and which reagent had some left over? The aluminum was consumed, and copper was left over as seen by the reddish particles. 2. If 5.0 g of iron metal is reacted with 15.0 g of Cl2 gas, how many grams of ferric chloride will form? About 14.52 grams will form. 3. For the reaction above the amount of ferric chloride obtained in the lab was 9.15 grams. Calculate the percent yield. The percent yield would be around 63.02%. 4. What are some reasons for obtaining a percent yield of less than 100 percent? Factors such as the reactants not reacting completely, human error in the experiment, the reactants might have too large of a surface area for reaction, multiple reactions occurring within an experiment, temperature, etc.
Which of the following statements best explains why the atomic radius increases from top to bottom of the periodic table? A. The electronegativity decreases from top to bottom of the periodic table, so the atoms near the bottom have an increased capacity for electrons. B. For the atoms lower in the periodic table, there is more difference in charge between the electrons and the protons, which allows electrons to orbit farther from nucleus. C. The ionization energy decreases from top to bottom of the periodic table, so the atoms near the bottom have an increased capacity for electrons. D. For the atoms lower in the periodic table, the valence electrons are in higher energy levels and farther from the nucleus.

Calculate the energies of one photon of ultraviolet (λ = 1 x 10⁻⁸ m), visible (λ = 5 x 10⁻⁷ m), and infrared (λ = 1 x 10⁴ m) light. What do the answers indicate about the relationship between the wavelength and energy of light?

Answers

Answer:

Energy of ultraviolet light is 19.878 10⁻¹⁸ J

Energy of visible light is 3.9756 X 10⁻¹⁹ J

Energy of infrared light is 19.878 X 10⁻³⁰ J

The answers indicate that wavelength is inversely proportional to the energy of light (photon)

Explanation:

Energy of photon E = hc/λ

where;

h is Planck's constant = 6.626 X 10⁻³⁴js

c is the speed of light (photon) = 3 X 10⁸ m/s

λ is the wavelength of the photon

⇒For ultraviolet ray, with wavelength λ = 1 x 10⁻⁸ m

E = (6.626 X 10⁻³⁴ X 3 X 10⁸)/ (1 x 10⁻⁸)

E = 19.878 10⁻¹⁸ J

⇒For Visible light, with wavelength λ = 5 x 10⁻⁷ m

E = (6.626 X 10⁻³⁴ X 3 X 10⁸)/ (5 x 10⁻⁷)

E = 3.9756 X 10⁻¹⁹ J

⇒For Infrared, with wavelength λ = 1 x 10⁴ m

E = (6.626 X 10⁻³⁴ X 3 X 10⁸)/ (1 x 10⁴)

E = 19.878 X 10⁻³⁰ J

From the result above, ultraviolet ray has the shortest wavelength, but it has the highest energy among other lights.

Also infrared has the highest wavelength but the least energy among other lights.

Hence, wavelength is inversely proportional to the energy of light (photon).

Hi ! Could someone help me out with this last part to my chemistry practice ? Thank you !

Answers

After 100years, sample is 250g

After 200 years, sample is 125g

After 300years, sample is 62.5 g

A student adds solid KCl to water in a flask. The flask is sealed with a stopper and thoroughly shaken until no more solid KCl dissolves. Some solid KCl is still visible in the flask. The solution in the flask is A) saturated and is at equilibrium with the solid KCl B) saturated and is not at equilibrium with the solid KCl C) unsaturated and is at equilibrium with the solid KCl D) unsaturated and is not at equilibrium with the solid KCl

Answers

Answer:

Option (A) saturated and is at equilibrium with the solid KCl

Explanation:

A saturated solution is a solution which can not dissolve more solute in the solution.

From the question given above, we can see that the solution is saturated as it can not further dissolve any more KCl as some KCl is still visible in the flask.

Equilibrium is attained in a chemical reaction when there is no observable change in the reaction system with time. Now, observing the question given we can see that there is no change in flask as some KCl is still visible even after thorough shaking. This simply implies that the solution is in equilibrium with the KCl solid as no further dissolution occurs.

The specific spatial arrangement of amino acid residues that are close to each other in the polypeptide chain is called______the structure of a protein.a. primary.
b. secondary.
c. tertiary.
d. quaternary .

Answers

The specific spatial arrangement of amino acid residues that are close to each other in the polypeptide chain is called the tertiarystructure of a protein.

What is Protein?

Protein structure is three dimensional in shape, where the atoms are arranged in amino acid chain. The chain is polypeptide containing many amino acid sequences.

The tertiary structure have a single polypeptide chain which is called the backbone.

Therefore, the specific spatial arrangement of amino acid residues that are close to each other in the polypeptide chain is called the tertiarystructure of a protein.

Learn more on protein structure here,

brainly.com/question/17338734

Answer:

c. tertiary.

Explanation:

In this case, we can review the definition of each level of structuration in the proteins:

Primary structure

In the primary structure, the amino acids are linked by peptide bonds. That is, the order of the amino acids is the criterion that defines this type of structure.

Secondary structure

In the secondary structure, we have to look at the way in which the protein is folded. The options are:

-) Beta-laminar: A structure in which the protein has a planar shape.

-) Alpha-helix: A structure in which the protein has a cross-strand form.

Tertiary structure

In the tertiary structure, the R groups that the amino acids have in the primary structure can generate interactions with each other. Interactions such as hydrogen bridges, dipole-dipole, hydrophobic interactions. This makes the protein have a very specific three-dimensional structure, on which its function depends.

Quaternary structure

In the quaternary structure, several subunits may be attached, or there may be prostatic groups (metals that can help to attach various protein units).

With all these in mind, the deffinition that fits with the description in the question is the tertiary structure.

I hope it helps!

Which step would help a student find the molecular formula of a compound from the empirical formula? Multiply the subscripts of the empirical formula by the value of the ratio of the molar mass of the compound to the empirical molar mass of the compound. Subtract the value of the ratio of the molar mass of the compound to the empirical molar mass of the compound from the subscripts of the empirical formula. Divide the subscripts of the empirical formula by the value of the ratio of the molar mass of the compound to the empirical molar mass of the compound. Add the value of the ratio of the molar mass of the compound to the empirical molar mass of the compound to the subscripts of the empirical formula..

Answers

Answer:

Multiply the subscripts of the empirical formula by the value of the ratio of the molar mass of the compound to the empirical molar mass of the compound.

Explanation:

got it right on edge 2020 :)

Answer:

Multiply the subscripts of the empirical formula by the value of the ratio of the molar mass of the compound to the empirical molar mass of the compound.

Explanation:

1. (a) What name is given to the law describing the relationship between volume and pressure at constant temperature? Write a mathematical expression that describes this relationship. (2 marks)(b) Sketch a graph of the relationship described in part (a).